Matthew R. Hartings

Broadly tunable, mode-hop-tuned cw optical parametric oscillator based on periodically poled lithium niobate

We describe a broadly tunable, cw optical parametric oscillator (OPO) based on periodically poled lithium niobate. The OPO can be tuned over a broad region in the mid IR (2900-3100 cm(-1)) covering the important C-H stretch region while a high spectral resolution (<0.1 cm(-1)) is maintained. The OPO is the light source for a field-portable photoacoustic spectrometer for gas-phase monitoring of volatile organic compounds.

Communicating chemistry for public engagement

The communication of chemistry to wider society is difficult because of ‘chemophobia’, its inherent complexity and its lack of unifying grand themes. To engage with citizens about the benefits and related dangers of the field, chemists must improve their dialogue with broader sections of the public — but how?

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites.

Abstract To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1, 5, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO2 during the different processing steps. The measured mechanical properties (strain and Young’s modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO2 incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO2 within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO2 was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures. Video abstract Read the transcript Watch the video on Vimeo

Reactions coupled to palladium

You would be forgiven if you thought the most important element in an organic transformation was carbon. Matthew Hartings argues that, for just over half a century in many of chemistrys most renowned organic reactions, it has actually been palladium.

Protein Binding and the Electronic Properties of Iron(II) Complexes: An Electrochemical and Optical Investigation of Outer Sphere Effects

Metalloenzymes and electron transfer proteins influence the electrochemical properties of metal cofactors by controlling the second-sphere environment of the protein active site. Properties that tune this environment include the dielectric constant, templated charge structure, van der Waals interactions, and hydrogen bonds. By systematically varying the binding of a redox-active ligand with a protein, we can evaluate how these noncovalent interactions alter the electronic structure of the bound metal complex. For this study, we employ the well-characterized avidin-biotin conjugate as the protein-ligand system, and have synthesized solvatochromic biotinylated and desthiobiotinylated iron(II) bipyridine tetracyano complexes ([Fe(BMB)(CN)(4)](2-) (1) and [Fe(DMB)(CN)(4)](2-) (2)). The binding affinities of 1 and 2 with avidin are 3.5 × 10(7) M(-1) and 1.5 × 10(6) M(-1), respectively. The redox potentials of 1 and 2 (333 mV and 330 mV) shift to 193 mV and 203 mV vs Ag/AgCl when the complex is bound to avidin and adsorbed to a monolayer-coated gold electrode. Upon binding to avidin, the MLCT1 band red-shifts 20 nm for 1 and 10 nm for 2. Similarly, the MLCT2 band for 1 red-shifts 7 nm and the band for 2 red-shifts 6 nm. For comparison, the electronic properties of 1 and 2 were investigated in organic solvents, and similar shifts in the MLCT bands and redox potentials were observed. An X-ray crystal structure of 1 bound to avidin was obtained, and molecular dynamics simulations were performed to analyze the protein environment of the protein-bound transition metal complexes. Our studies demonstrate that changes in the binding affinity of a ligand-receptor pair influence the outer-sphere coordination of the ligand, which in turn affects the electronic properties of the bound complex.

Probing Melittin Helix−Coil Equilibria in Solutions and Vesicles

Melittin is a toxic, amphipathic peptide that rearranges from a random coil in solution to a helical structure upon binding to cell membranes or lipid vesicles. We have found that mutation of the valine at position five of the peptide to a phenylalanine or 3-nitrotyrosine induces aggregation and helix formation at low concentrations (20-80 microM). Donor-acceptor distances obtained from analyses of fluorescence energy transfer kinetics experiments with the 3-nitrotyrosine mutant indicate that both coil and helix structures are present in 2 and 20 microM aqueous solutions. The helical peptide population increases upon addition of phospholipid vesicles or in high ionic strength solutions.

Concurrent zero-dimensional and one-dimensional biomineralization of gold from a solution of Au3+ and bovine serum albumin

Abstract A technique was developed for preparing a novel material that consists of gold nanoparticles trapped within a fiber of unfolded proteins. These fibers are made in an aqueous solution that contains HAuCl4 and the protein, bovine serum albumin (BSA). By changing the ratio of gold to BSA in solution, two different types of outcomes are observed. At lower gold to BSA ratios (30–120), a purple solution results after heating the mixture at 80 °C for 4 h. At higher gold to BSA ratios (130–170), a clear solution containing purple fibers results after heating the mixture at 80 °C for 4 h. UV–Vis spectroscopy and light scattering techniques show growth in nanocolloid size as gold to BSA ratio rises above 100. Data indicate that, for the higher gold to BSA ratios, the gold is sequestered within the solid material. The material mass, visible by eye, appears to be an aggregation of smaller individual fibers. Scanning electron microscopy and transmission electron microscopy indicate that these fibers are primarily one-dimensional aggregates, which can display some branching, and can be as narrow as 400 nm in size. The likely mechanism for the synthesis of the novel material is discussed.

Toward 3D printed hydrogen storage materials made with ABS-MOF composites

The push to advance efficient, renewable, and clean energy sources has brought with it an effort to generate materials that are capable of storing hydrogen. Metal-organic framework materials (MOFs) have been the focus of many such studies as they are categorized for their large internal surface areas. We have addressed one of the major shortcomings of MOFs (their processibility) by creating and 3D printing a composite of acrylonitrile butadiene styrene (ABS) and MOF-5, a prototypical MOF, which is often used to benchmark H2 uptake capacity of other MOFs. The ABS-MOF-5 composites can be printed at MOF-5 compositions of 10% and below. Other physical and mechanical properties of the polymer (glass transition temperature, stress and strain at the breaking point, and Youngs modulus) either remain unchanged or show some degree of hardening due to the interaction between the polymer and the MOF. We do observe some MOF-5 degradation through the blending process, likely due to the ambient humidity through the purification and solvent casting steps. Even with this degradation, the MOF still retains some of its ability to uptake H2, seen in the ability of the composite to uptake more H2 than the pure polymer. The experiments and results described here represent a significant first step toward 3D printing MOF-5-based materials for H2 storage.

Protein-based ferrogels ☆

We present a novel synthesis in which hemoglobin and Fe(2+) react, in the presence of KNO3 and KOH, to produce protein microgels that contain magnetic iron oxide nanoparticles. The synthesis results in microgels with polymer properties (denaturing and glass transition temperatures) that are consistent with the dried protein. The iron oxide nanoparticles that exhibit an average diameter of 22nm, are ferrimagnetic, and display properties consistent with Fe3O4. The multiple functional capabilities displayed by these materials: biocompatibility, magnetism, dye uptake and controlled release, and other properties archetypal of hydrogels, will make the magnetic hydrogels attractive for a number of biomedical applications.