Meijuan Ding

The study of core–shell molecularly imprinted polymers of 17β-estradiol on the surface of silica nanoparticles

In this paper, highly selective core-shell molecularly imprinted polymers of 17β-estradiol on the surface of silica nanoparticles (SiO(2)@E2-MIPs) were prepared. The SiO(2)@E2-MIPs were characterized by Fourier transform infrared spectrometer (FT-IR), transmission electron microscope (TEM), dynamic adsorption and static adsorption tests. The sorption capacity of the SiO(2)@E2-MIPs were nearly 5 times that of the non-imprinted polymers (NIPs), and it only took 25 min to achieve the sorption equilibrium. It indicated that the SiO(2)@E2-MIPs exhibited a high selectivity, large adsorption capacity and fast kinetics. When the SiO(2)@E2-MIPs were used as dispersive solid-phase extraction (dSPE) absorbents to selectively enrich and determine estrogens in duck feed, the average recoveries of E2 and estriol (E3) were higher than 96.74% and 72.07%, respectively, and the relative standard deviations (RSD) of E2 and E3 were less than 1.61% and 3.28%, respectively. The study provides an effective method for the separation and enrichment of estrogens in the complex matrix samples by the SiO(2)@E2-MIPs.

Preparation of imprinted polymers at surface of magnetic nanoparticles for the selective extraction of tadalafil from medicines.

In this paper, highly selective core-shell molecularly imprinted polymers (MIPs) of tadalafil on the surface of magnetic nanoparticles (MNPs) were prepared. Three widely used functional monomers 2-(trifluoromethyl) acrylic acid (TFMAA), acrylic acid (AA), and methacrylic acid (MAA) were compared theoretically as the candidates for MIP preparation. MIP-coated magnetic nanoparticles (MIP-coated MNPs) showed large adsorption capacity, high recognition ability, and fast binding kinetics for tadalafil. Furthermore, because of the good magnetic properties, MIP-coated MNPs can achieve rapid and efficient separation with an external magnetic field simply. The resulting MIP-coated MNPs were used as dispersive solid-phase extraction (DSPE) materials coupled with HPLC-UV for the selective extraction and detection of tadalafil from medicines (herbal sexual health products). Encouraging results were obtained. The amounts of tadalafil that were detected from the herbal sexual health product was 43.46 nmol g(-1), and the recoveries were in the range of 87.36-90.93% with the RSD < 6.55%.

Synthesis of core–shell magnetic molecularly imprinted polymers and detection of sildenafil and vardenafil in herbal dietary supplements

An analytical procedure for selective extraction of sildenafil and vardenafil in herbal dietary supplements (HDSs) has been set up by using the magnetic molecularly imprinted polymers (MMIPs) as the extraction and clean-up materials, followed by high performance liquid chromatography-ultraviolet (HPLC-UV). The MMIPs were prepared by a surface molecular imprinting technique, using Fe(3)O(4) magnetite as a magnetically susceptible component, sildenafil as template molecule, 2-(trifluoromethyl) acrylic acid (TFMAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as polymeric matrix components. The MMIPs were characterized by transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM), respectively. The heterogeneity of the MMIPs was modeled with the Freundlich isotherm equation. The resulting MMIPs had high recognition ability and fast binding kinetics for sildenafil. The MMIPs were used as dispersive solid-phase extraction (DSPE) materials to selectively extract sildenafil and vardenafil from HDSs, the contents of sildenafil and vardenafil were found to be 8.05 and 3.86 μg g(-1), respectively, and the average recoveries in spiked HDSs were 70.91-91.75% with a relative standard deviation (R.S.D.) below 7%. The MMIPs were successfully used to selectively enrich and determine sildenafil and vardenafil from HDSs.

Self-assembly molecularly imprinted polymers of 17β-estradiol on the surface of magnetic nanoparticles for selective separation and detection of estrogenic hormones in feeds

This paper reports a surface molecular self-assembly strategy for molecular imprinting on magnetic nanoparticles for selective separation and detection of estrogens in feeds. First, γ-methacryloxypropyltrimethoxysilane (MEMO) was successfully assembled at the surface magnetic nanoparticles through simple free radical polymerization, and subsequently, the copolymerization was further assembled between methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) in the presence of templates 17β-estradiol (E2). The synthesized magnetic molecularly imprinted polymers for E2 (E2-MMIPs) showed quick separation, large adsorption capacity, high selectivity and fast binding kinetics for E2. Meanwhile, a dispersive solid-phase extraction (DSPE) based on E2-MMIPs has been established for efficient separation and fast enrichment of estrogens from the feeds. The assay exhibited a linear range of 0.1-4 μM for E2 and estriol (E3) with the correlation coefficient above 0.9996 and 0.9994, respectively. Recoveries of E2 from three kinds of feeds spiked at different concentration levels ranged from 92.7% to 97.0% with RSD<4.7%, and recoveries of E3 ranged from 71.9% to 83.1% with RSD<4.9%, respectively. The method is simple and sensitive, and can be used as an alternative tool to effectively separate and enrich the trace of estrogens in agricultural products by HPLC-UV.

Construction of uniformly sized pseudo template imprinted polymers coupled with HPLC–UV for the selective extraction and determination of trace estrogens in chicken tissue samples

To assess the potential risks associated with the environmental exposure of steroid estrogens, a novel highly efficient and selective estrogen enrichment procedure based on the use of molecularly imprinted polymer has been developed and evaluated. Herein, analogue of estrogens, namely 17-ethyl estradiol (EE(2)) was used as the pseudo template, to avoid the leakage of a trace amount of the target analytes. The resulting pseudo molecularly imprinted polymers (PMIPs) showed large sorption capacity, high recognition ability and fast binding kinetics for estrogens. Moreover, using these imprinted particles as dispersive solid-phase extraction (DSPE) materials, the amounts of three estrogens (E(1), E(2) and E(3)) which were detected by HPLC-UV from the chicken tissue samples were 0.28, 0.31 and 0.17 μg g(-1), and the recoveries were 72.5-78.7%, 90.3-95.2% and 80.5-83.6% in spiked chicken tissue samples with RSD <7%, respectively. All these results reveal that EE(2)-PMIPs as DSPE materials coupled with HPLC-UV could be applied to the highly selective separation and sensitive determination of trace estrogens in chicken tissue samples.

Determination of itopride hydrochloride in human plasma by RP-HPLC with fluorescence detection and its use in bioequivalence study

A sensitive, selective and simple method using a precipitation of protein with 10% perchloric acid, followed by high-performance liquid chromatography (HPLC) with fluorescence detection was developed for the determination of itopride hydrochloride in human plasma, using levofloxacin as the internal standard (IS). Chromatographic separation was obtained within 7.0 min using a reverse phase Hypersil BDS C(18) (250 mm x 4.6 mm, 5 microm) column and an isocratic mobile phase, constituting of a mixture of 0.1 mol/l ammonium acetate-methanol (30:70, v/v) flowing at 1.1 ml/min. The excitation and emission wavelengths were set at 304 and 344 nm, respectively. The method was validated over the concentration range of 5 ng/ml to 1000.0 ng/ml. The lower limit of quantitation (LLOQ) was 5 ng/ml. The extractive recovery of itopride hydrochloride from the biological matrix was more than 80.77%. The intra-day accuracy of the drug containing serum samples was more than 82.94% with a precision of 2.81-4.37%. The inter-day accuracy was 82.91% or more, with a precision of 6.89-9.54%. The limit we have used (70-143%) is based on the local regulatory authority (SFDA). The developed method was validated and successfully applied to bioequivalence studies of itopride hydrochloride in healthy male volunteers.