Melissa M. Levack

Three-Dimensional Echocardiographic Analysis of Mitral Annular Dynamics Implication for Annuloplasty Selection

Background— Proponents of flexible annuloplasty rings have hypothesized that such devices maintain annular dynamics. This hypothesis is based on the supposition that annular motion is relatively normal in patients undergoing mitral valve repair. We hypothesized that mitral annular dynamics are impaired in ischemic mitral regurgitation and myxomatous mitral regurgitation. Methods and Results— A Philips iE33 echocardiographic module and X7–2t probe were used to acquire full-volume real-time 3-dimensional transesophageal echocardiography loops in 11 normal subjects, 11 patients with ischemic mitral regurgitation and 11 patients with myxomatous mitral regurgitation. Image analysis was performed using Tomtec Image Arena, 4D-MV Assessment, 2.1 (Munich, Germany). A midsystolic frame was selected for the initiation of annular tracking using the semiautomated program. Continuous parameters were normalized in time to provide for uniform systolic and diastolic periods. Both ischemic mitral regurgitation (9.98±155 cm2) and myxomatous mitral regurgitation annuli (13.29±3.05 cm2) were larger in area than normal annuli (7.95±1.40 cm2) at midsystole. In general, ischemic mitral regurgitation annuli were less dynamic than controls. In myxomatous mitral regurgitation, annular dynamics were also markedly abnormal with the mitral annulus dilating rapidly in early systole in response to rising ventricular pressure. Conclusions— In both ischemic mitral regurgitation and myxomatous mitral regurgitation, annular dynamics and anatomy are abnormal. Flexible annuloplasty devices used in mitral valve repair are, therefore, unlikely to result in either normal annular dynamics or normal anatomy.

In vivo chronic myocardial infarction characterization by spin locked cardiovascular magnetic resonance.

BackgroundLate gadolinium enhanced (LGE) cardiovascular magnetic resonance (CMR) is frequently used to evaluate myocardial viability, estimate total infarct size and transmurality, but is not always straightforward is and contraindicated in patients with renal failure because of the risk of nephrogenic systemic fibrosis. T2- and T1-weighted CMR alone is however relatively insensitive to chronic myocardial infarction (MI) in the absence of a contrast agent. The objective of this manuscript is to explore T1ρ-weighted rotating frame CMR techniques for infarct characterization without contrast agents. We hypothesize that T1ρ CMR accurately measures infarct size in chronic MI on account of a large change in T1ρ relaxation time between scar and myocardium.Methods7Yorkshire swine underwent CMR at 8 weeks post-surgical induction of apical or posterolateral myocardial infarction. Late gadolinium enhanced and T1ρ CMR were performed at high resolution to visualize MI. T1ρ-weighted imaging was performed with a B1 = 500 Hz spin lock pulse on a 3 T clinical MR scanner. Following sacrifice, the heart was excised and infarct size was calculated by optical planimetry. Infarct size was calculated for all three methods (LGE, T1ρ and planimetry) and statistical analysis was performed. T1ρ relaxation time maps were computed from multiple T1ρ-weighted images at varying spin lock duration.ResultsMean infarct contrast-to-noise ratio (CNR) in LGE and T1ρ CMR was 2.8 ± 0.1 and 2.7 ± 0.1. The variation in signal intensity of tissues was found to be, in order of decreasing signal intensity, LV blood, fat and edema, infarct and healthy myocardium. Infarct size measured by T1ρ CMR (21.1% ± 1.4%) was not significantly different from LGE CMR (22.2% ± 1.5%) or planimetry (21.1% ± 2.7%; p < 0.05).T1ρ relaxation times were T1ρinfarct = 91.7 ms in the infarct and T1ρremote = 47.2 ms in the remote myocardium.ConclusionsT1ρ-weighted imaging using long spin locking pulses enables high discrimination between infarct and myocardium. T1ρ CMR may be useful to visualizing MI without the need for exogenous contrast agents for a wide range of clinical cardiac applications such as to distinguish edema and scar tissue and tissue characterization of myocarditis and ventricular fibrosis.

Three-Dimensional Ultrasound-Derived Physical Mitral Valve Modeling

PURPOSE Advances in mitral valve repair and adoption have been partly attributed to improvements in echocardiographic imaging technology. To educate and guide repair surgery further, we have developed a methodology for fast production of physical models of the valve using novel three-dimensional (3D) echocardiographic imaging software in combination with stereolithographic printing. DESCRIPTION Quantitative virtual mitral valve shape models were developed from 3D transesophageal echocardiographic images using software based on semiautomated image segmentation and continuous medial representation algorithms. These quantitative virtual shape models were then used as input to a commercially available stereolithographic printer to generate a physical model of the each valve at end systole and end diastole. EVALUATION Physical models of normal and diseased valves (ischemic mitral regurgitation and myxomatous degeneration) were constructed. There was good correspondence between the virtual shape models and physical models. CONCLUSIONS It was feasible to create a physical model of mitral valve geometry under normal, ischemic, and myxomatous valve conditions using 3D printing of 3D echocardiographic data. Printed valves have the potential to guide surgical therapy for mitral valve disease.

The influence of saddle-shaped annuloplasty on leaflet curvature in patients with ischaemic mitral regurgitation

OBJECTIVES Reports indicate that repair procedures for ischaemic mitral regurgitation (IMR) are less durable than previously thought. Repair failure has been shown to be stress related. Leaflet curvature is the major determinant of valve stress. Theoretical and animal experiments have shown that saddle-shaped annuloplasty optimizes leaflet curvature when compared with standard flat ring annuloplasty. Despite this, the influence of the ring shape on leaflet curvature has not been described in patients with IMR. This study uses real-time three-dimensional echocardiography (rt-3DE) to assess the influence of the ring shape on leaflet curvature. METHODS Rt-3DE was performed in 21 patients with IMR after placement of either a flat (n = 10, CE-Physio, Edwards) or saddle-shaped (n = 11, Profile 3D, Medtronic) annuloplasty ring. A combination of commercially available and customized software was used to measure multiple leaflet curvature parameters across all regions of the mitral valve. RESULTS Independently of the shape of the annuloplasty ring, all patients were subject to the same degree of annular undersizing. Patients who received saddle-shaped annuloplasty rings had greater leaflet curvature in all six mitral valve leaflet regions (A1 = 0.36 ± 0.10, A2 = 0.53 ± 0.13, A3 = 0.47 ± 0.13, P1 = 0.35 ± 0.23, P2 = 0.53 ± 0.34, P3 = 0.42 ± 0.20 cm(-2)) compared with patients who received flat annuloplasty rings (A1 = 0.16 ± 0.11, A2 = 0.18 ± 0.09, A3 = 0.16 ± 0.11, P1 = 0.20 ± 0.17, P2 = 0.21 ± 0.11, P3 = 0.18 ± 0.13 cm(-2)). These differences were statistically significant in all regions except the P1 region. CONCLUSIONS Saddle-shaped annuloplasty rings increase leaflet curvature compared with flat rings in patients with IMR. As a result, saddle-shaped annuloplasty may decrease leaflet stress and potentially increases the durability of the repair in patients with IMR.

The Effect of Surgical and Transcatheter Aortic Valve Replacement on Mitral Annular Anatomy

BACKGROUND The effect of aortic valve replacement on three-dimensional mitral annular geometry has not been well described. Emerging transcatheter approaches for aortic valve replacement employ fundamentally different mechanical techniques for achieving fixation and seal of the prosthetic valve than standard surgical aortic valve replacement. This study compares the immediate impact of transcatheter aortic valve replacement (TAVR) and standard surgical aortic valve replacement (AVR) on mitral annular anatomy. METHODS Real-time three-dimensional echocardiography was performed in patients undergoing TAVR using the Edwards Sapien valve (n = 10 [Edwards Lifesciences, Irvine, CA]) or AVR (n = 10) for severe aortic stenosis. Mitral annular geometric indexes were measured using Tomtec EchoView (Tomtec Imaging Systems, Munich, Germany) to assess regional and global annular geometry. RESULTS Mixed between-within analysis of variance showed no differences between TAVR and AVR groups in any of the mitral annular geometric indices preoperatively. However, postoperative analysis did demonstrate an effect of AVR on geometry. Patients undergoing open AVR had significant decrease in annular height, septolateral diameter, mitral valve transverse diameter, and mitral annular area after valve replacement (p ≤ 0.006). Similar changes were not noted in the TAVR group. CONCLUSIONS Mitral annular geometry is better preserved by TAVR than by AVR. Thus, TAVR may be a more physiologic approach to aortic replacement.

Rapid Aortic Arch Debranching Using the Gore Hybrid Vascular Graft

A significant fraction of patients who survive repair of a DeBakey type I aortic dissection will require a secondary intervention to address ongoing aortic remodeling. Strategic treatment of this population mandates that the technical feasibility of secondary operations be considered at the index procedure. We evaluated a hybrid-based modification of a widely accepted surgical approach that obviates the need for advanced perfusion management techniques and facilitates secondary endografting. Hybrid technology allows for the physiologic equivalent of a total arch replacement without the operative complexity associated with a traditional approach while allowing for strategic planning if a secondary operation is warranted.

Annuloplasty Ring Dehiscence in Ischemic Mitral Regurgitation

A 75-year-old woman described having shortness of breath. Four months earlier she had undergone coronary artery bypass grafting and undersized annuloplasty for treatment of ischemic mitral regurgitation (IMR). Real-time three-dimensional echocardiography revealed annuloplasty ring (AR) dehiscence (Fig 1A) from the posterior annulus (PA) and recurrent IMR (Fig 1B). Often the degree of annular undersizing necessary to restore valve competence in IMR is substantial and predisposes to ring dehiscence. Customized software was used to generate a quantitative three-dimensional model of the patient’s valve, including leaflets (anterior, AL; posterior, PL), annulus (An), annuloplasty ring (AR), and regurgitant orifice area (ROA) (Fig 1C, D). Such modeling techniques are rapidly evolving and in the future will allow annular and leaflet stress to be determined before and after operation. Inasmuch as most repair failures are stress related, these models should promote the development of patient-specific strategies that improve the results of mitral repair operation. Fig 1

Posterior Leaflet Augmentation in Ischemic Mitral Regurgitation Increases Leaflet Coaptation and Mobility

BACKGROUND Restoring leaflet coaptation is the primary objective in repair of ischemic mitral regurgitation (IMR). The common practice of placing an undersized annuloplasty ring partially achieves this goal by correcting annular dilation; however, annular reduction has been demonstrated to exacerbate posterior leaflet tethering. Using a sheep model of IMR, we tested the hypothesis that posterior leaflet augmentation (PLA) combined with standard annuloplasty sizing increases leaflet coaptation more effectively than undersized annuloplasty alone. METHODS Eight weeks after posterobasal myocardial infarction, 15 sheep with 2+ or greater IMR underwent annuloplasty with either a 24-mm annuloplasty ring (24-mm group, n = 5), 30-mm ring (30-mm group, n = 5), or 30-mm ring with concomitant augmentation of the posterior leaflet (PLA group, n = 5). Using three-dimensional echocardiography, postrepair coaptation zone and posterior leaflet mobility were assessed. RESULTS Leaflet coaptation length after repair was greater in the PLA group (4.1 ± 0.3 mm) and the 24-mm group (3.8 ± 0.5 mm) as compared with the 30-mm group (2.7 ± 0.6 mm, p < 0.01). Leaflet coaptation area was significantly greater in the PLA group (121.5 ± 6.6 mm(2)) as compared with the 30-mm group (77.5 ± 17.0 mm(2)) or the 24-mm group (92.5 ± 17.9 mm(2), p < 0.01). Posterior leaflet mobility was significantly greater in the PLA group as compared with the 30-mm group or the 24-mm group. CONCLUSIONS Posterior leaflet augmentation combined with standard-sized annuloplasty enhances leaflet coaptation more effectively than either standard-sized annuloplasty or undersized annuloplasty alone. Increased leaflet coaptation after PLA provides redundancy to IMR repair, and may decrease incidence of both recurrent IMR and mitral stenosis.

Quantitative analysis of 3-dimensional aortic annular geometry: implication for aortic root reimplantation.

From the Division of Cardiovascular Surgery, Sanger Heart and Vascular Institute, Carolinas Medical Center, Charlotte, NC; the Gorman Cardiovascular Research Group, University of Pennsylvania School of Medicine, Philadelphia, Pa; and the Division of Cardiovascular Surgery, University of Pennsylvania School of Medicine, Philadelphia, Pa. Disclosures: Authors have nothing to disclose with regard to commercial support. Received for publication Dec 7, 2012; revisions received March 6, 2013; accepted for publication March 15, 2013; available ahead of print Dec 11, 2013. Address for reprints: Joseph E. Bavaria, MD, Division of Cardiovascular Surgery, University of Pennsylvania School of Medicine, 3400 Spruce St, 6 Silverstein Pavilion, Philadelphia, PA 19104 (E-mail: Joseph.Bavaria@uphs.upenn.ed). J Thorac Cardiovasc Surg 2014;147:1103-5 0022-5223/

Three-Dimensional Echocardiographic Analysis of Mitral Annular Dynamics

36.00 Copyright 2014 Published by Elsevier Inc. on behalf of The American Association for Thoracic Surgery http://dx.doi.org/10.1016/j.jtcvs.2013.03.046