Melvin E. Zandler

Corrole−Fullerene Dyads: Formation of Long-Lived Charge-Separated States in Nonpolar Solvents

The first example of covalently linked free-base corrole-fullerene dyads is reported. In the newly synthesized dyads, the free-energy calculations performed by employing the redox and singlet excited-state energy in both polar and nonpolar solvents suggested the possibility of electron transfer from the excited singlet state of corrole to the fullerene entity. Accordingly, steady-state and time-resolved emission studies revealed efficient fluorescence quenching of the corrole entity in the dyads. Further studies involving femtosecond laser flash photolysis and nanosecond transient absorption studies confirmed electron transfer to be the quenching mechanism, in which the electron-transfer product, the fullerene anion radical, was able to be spectrally characterized. The rate of charge separation, kCS, was found to be on the order of 10(10)-10(11) s(-1), suggesting an efficient photoinduced electron-transfer process. Interestingly, the rate of charge recombination, kCR, was slower by 5 orders of magnitude in nonpolar solvents, cyclohexane and toluene, resulting in a radical ion-pair lasting for several microseconds. Careful analysis of the kinetic and thermodynamic data using the Marcus approach revealed that this novel feature is due to appropriately positioning the energy level of the charge-separated state below the triplet states of either of the donor and acceptor entities in both polar and nonpolar solvents, a feature that was not evident in donor-acceptor dyads constructed using symmetric tetrapyrroles as electron donors.

Melamine Acoustic Chemosensor Based on Molecularly Imprinted Polymer Film

A melamine piezomicrogravimetric (acoustic) chemosensor using a molecularly imprinted polymer (MIP) film has been devised and tested. The MIP films were prepared by electropolymerization of the melamine complexed by the functional monomer of the bis(bithiophene) derivative bearing an 18-crown-6 substituent 4. The structure of the MIP-melamine complex was visualized by the DFT B3LYP/3-21G(*) energy optimization calculations. The sensitivity and selectivity of the MIP film was improved by cross-linking the polymer with the bithianaphthene monomer 5 and the presence of the porogenic ionic liquid in the prepolymerization solution. After electropolymerization, the melamine template was extracted from the MIP film with an aqueous strong base solution. The measurements of UV-vis spectroscopy, X-ray photoelectron spectroscopy (XPS), DPV, and EIS as well as scanning electrochemical microscopy (SECM) imaging confirmed extraction of the melamine template from the MIP film and then rebinding of the melamine analyte while the film relative roughness and porosity was determined by atomic force microscopy (AFM) and scanning electron microscopy (SEM) imaging, respectively. The analytical as well as kinetic and thermodynamic parameters of the chemosensing were assessed under flow-injection analysis (FIA) conditions with piezoelectric microgravimetry (PM) detection. The linear concentration range for melamine detection was 5 nM to at least 1 mM with a limit of detection of approximately 5 nM. The chemosensor successfully discriminated the cyanuric acid, cyromazine, and ammeline interfering agents.

Near-IR excitation transfer and electron transfer in a BF2-chelated dipyrromethane-azadipyrromethane dyad and triad

A molecular dyad and triad, comprised of a known photosensitizer, BF(2)-chelated dipyrromethane (BDP), covalently linked to its structural analog and near-IR emitting sensitizer, BF(2)-chelated tetraarylazadipyrromethane (ADP), have been newly synthesized and the photoinduced energy and electron transfer were examined by femtosecond and nanosecond laser flash photolysis. The structural integrity of the newly synthesized compounds has been established by spectroscopic, electrochemical, and computational methods. The DFT calculations revealed a molecular-clip-type structure for the triad, in which the BDP and ADP entities are separated by about 14 Å with a dihedral angle between the fluorophores of around 70°. Differential pulse voltammetry studies have revealed the redox states, allowing estimation of the energies of the charge-separated states. Such calculations revealed a charge separation from the singlet excited BDP ((1)BDP*) to ADP (BDP(.+)-ADP(.-)) to be energetically favorable in nonpolar toluene and in polar benzonitrile. In addition, the excitation transfer from the singlet BDP to ADP is also envisioned due to good spectral overlap of the BDP emission and ADP absorption spectra. Femtosecond laser flash photolysis studies provided concrete evidence for the occurrence of energy transfer from (1)BDP* to ADP (in benzonitrile and toluene) and electron transfer from BDP to (1)ADP* (in benzonitrile, but not in toluene). The kinetic study of energy transfer was measured by monitoring the rise of the ADP emission and revealed fast energy transfer (ca. 10(11) s(-1)) in these molecular systems. The kinetics of electron transfer via (1)ADP*, measured by monitoring the decay of the singlet ADP at λ=820 nm, revealed a relatively fast charge-separation process from BDP to (1)ADP*. These findings suggest the potential of the examined ADP-BDP molecules to be efficient photosynthetic antenna and reaction center models.

Ultrafast Photoinduced Energy and Electron Transfer in Multi-Modular Donor-Acceptor Conjugates

New multi-modular donor-acceptor conjugates featuring zinc porphyrin (ZnP), catechol-chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C(60)), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction-center mimics. The X-ray structure of triphenylamine-BDP is also reported. The wide-band capturing polyad revealed ultrafast energy-transfer (k(ENT) =1.0 × 10(12) s(-1)) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA-BDP-ZnP triad through metal-ligand axial coordination resulted in electron donor-acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron-transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion-pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non-polar toluene were in the range of 5.0 × 10(9)-3.5 × 10(10) s(-1). Stabilization of the charge-separated state in these multi-modular donor-acceptor polyads is also observed to certain level.

Molecularly imprinted polymer (MIP) based piezoelectric microgravimetry chemosensor for selective determination of adenine

An adenine-templated molecularly imprinted polymer (MIP) film, deposited on a poly(bithiophene) barrier film, served as the recognition element of a piezomicrogravimetric (acoustic) chemosensor. A 10MHz AT-cut shear-thickness-mode bulk-acoustic-wave quartz crystal resonator with Pt film electrodes was used as the signal transducer. Adenine electrooxidation was prevented by the barrier film. The MIP film was deposited by electrochemical co-polymerization of two functional monomers of bis(bithiophene) derivatives, bearing either the 18-crown-6 or dioxaborinane substituent, in the presence of the adenine template. A strong base solution was then used to extract the template. Completeness of the template removal was substantiated by the UV-vis, XPS, DPV, and EIS measurements. The chemosensor performance was evaluated with the piezoelectric microgravimetry detection at QCM under FIA conditions using a carrier acetonitrile-water (1:1, v:v) mixed solvent solution. The linear dynamic concentration range extended from at least 0.1 to 1mM for the 35 microL/min flow rate, and 100 microL volume of the injected adenine solution. The chemosensor selectivity allowed for discrimination of the adenine analyte from structurally and functionally related interferants, such as 2-aminopurine, guanine, and ascorbic acid. The determined from the FIA kinetic studies stability constant of the MIP-adenine complex, (18+/-2.4)x10(4)M(-1), was much higher than that of the MIP-(2-aminopurine), (650+/-90)M(-1), MIP-guanine, (122+/-11)M(-1), and MIP-(ascorbic acid), (92+/-10)M(-1), complexes. The concentration limit of detection was as low as 5 nM adenine for the 35 microL/min flow rate, and 1 mL volume of the injected sample solution.

Photochemical charge separation in closely positioned donor-boron dipyrrin-fullerene triads

A series of molecular triads, composed of closely positioned boron dipyrrin-fullerene units, covalently linked to either an electron donor (donor(1)-acceptor(1)-acceptor(2)-type triads) or an energy donor (antenna-donor(1)-acceptor(1)-type triads) was synthesized and photoinduced energy/electron transfer leading to stabilization of the charge-separated state was demonstrated by using femtosecond and nanosecond transient spectroscopic techniques. The structures of the newly synthesized triads were visualized by DFT calculations, whereas the energies of the excited states were determined from spectral and electrochemical studies. In the case of the antenna-donor(1)-acceptor(1)-type triads, excitation of the antenna moiety results in efficient energy transfer to the boron dipyrrin entity. The singlet-excited boron dipyrrin thus generated, undergoes subsequent energy and electron transfer to fullerene to produce a boron dipyrrin radical cation and a fullerene radical anion as charge-separated species. Stabilization of the charge-separated state in these molecular triads was observed to some extent.

Charge stabilization in a closely spaced ferrocene-boron dipyrrin-fullerene triad

New molecular triads composed of closely spaced ferrocene-boron dipyrrin-fullerene, 1 and triphenylamine-boron dipyrrin-fullerene, 2 are synthesized, and photoinduced electron transfer leading to charge stabilization is demonstrated using a femtosecond transient spectroscopic technique.

Ultrafast Singlet−Singlet Energy Transfer in Self-Assembled via Metal−Ligand Axial Coordination of Free-Base Porphyrin−Zinc Phthalocyanine and Free-Base Porphyrin−Zinc Naphthalocyanine Dyads

Singlet-singlet energy transfer in self-assembled via axial coordination of imidazole-appended (at different positions of one of the meso-phenyl entities) free-base tetraphenylporphyrin, H(2)PIm, to either zinc phthalocyanine, ZnPc, or zinc naphthalocyanine, ZnNc, dyads is investigated in noncoordinating solvents, o-dichlorobenzene and toluene, using both steady-state and time-resolved transient absorption techniques. The newly formed supramolecular dyads were fully characterized by spectroscopic, computational, and electrochemical methods. The binding constants measured from optical absorption spectral data were found to be in the range of 10(4)-10(5) M(-1) for the 1:1 dyads, suggesting fairly stable complex formation. Electrochemical and computational studies suggested that photoinduced electron transfer is a thermodynamically unfavorable process when free-base porphyrin is excited in these dyads. Selective excitation of the donor free-base porphyrin entity was possible in both types of dyads formed by either of the ZnPc or ZnNc energy acceptors. Efficient singlet-singlet energy transfer was observed in these dyads, and the position of imidazole linkage on the free-base porphyrin entity, although flexible, seems to have some control over the overall efficiency of excited energy transfer process. Kinetics of energy transfer was monitored by performing transient absorption measurements using both up-conversion and pump-probe techniques. Such studies revealed ultrafast singlet-singlet energy transfer in the studied dyads with time constants on the order of 2-25 ps depending upon the type of the dyad.

A charge-stabilizing, multimodular, ferrocene-bis(triphenylamine)-zinc-porphyrin-fullerene polyad

A novel multimodular donor-acceptor polyad featuring zinc porphyrin, fullerene, ferrocene, and triphenylamine entities was designed, synthesized, and studied as a charge-stabilizing, photosynthetic-antenna/reaction-center mimic. The ferrocene and fullerene entities, covalently linked to the porphyrin ring, were distantly separated to accomplish the charge-separation/hole-migration events leading to the creation of a long-lived charge-separated state. The geometry and electronic structures of the newly synthesized compound was deduced by B3LYP/3-21G(*) optimization, while the energy levels for different photochemical events was established using data from the optical absorption and emission, and electrochemical studies. Excitation of the triphenylamine entities revealed singlet-singlet energy transfer to the appended zinc porphyrin. As predicted from the energy levels, photoinduced electron transfer from both the singlet and triplet excited states of the zinc porphyrin to fullerene followed by subsequent hole migration involving ferrocene was witnessed from the transient absorption studies. The charge-separated state persisted for about 8.5 μs and was governed by the distance between the final charge-transfer product, that is, a species involving a ferrocenium cation and a fullerene radical anion, with additional influence from the charge-stabilizing triphenylamine entities located on the zinc-porphyrin macrocycle.

Bionano donor-acceptor hybrids of porphyrin, ssDNA, and semiconductive single-wall carbon nanotubes for electron transfer via porphyrin excitation

Photoinduced electron transfer in self-assemblies of porphyrins ion-paired with ssDNA wrapped around single-wall carbon nanotubes (SWCNTs) has been reported. To accomplish the three-component hybrids, two kinds of diameter-sorted semiconducting SWCNT(n,m)s of different diameter ((n,m) = (6,5) and (7,6)) and free-base or zinc porphyrin bearing peripheral positive charges ((TMPyP(+))M (tetrakis(4-N-methylpyridyl)porphyrin); M = Zn and H(2)) serving as light-absorbing photoactive materials are utilized. The donor-acceptor hybrids are held by ion-pairing between the negatively charged phosphate groups of ssDNA on the surface of the SWCNT and the positively charged at the ring periphery porphyrin macrocycle. The newly assembled bionano donor-acceptor hybrids have been characterized by transmission electron microscopy (TEM) and spectroscopic methods. Photoinduced electron transfer from the excited singlet porphyrin to the SWCNTs directly and/or via ssDNA as an electron mediator has been established by performing systematic studies involving the steady-state and time-resolved emission as well as the transient absorption studies. Higher charge-separation efficiency has been successfully demonstrated by the selection of the appropriate semiconductive SWCNTs with the right band gap, in addition to the aid of ssDNA as the electron mediator.