Melvin P. Tucker

Visualizing lignin coalescence and migration through maize cell walls following thermochemical pretreatment.

Plant cell walls are composed primarily of cellulose, hemicelluloses, lignins, and pectins. Of these components, lignins exhibit unique chemistry and physiological functions. Although lignins can be used as a product feedstock or as a fuel, lignins are also generally seen as a barrier to efficient enzymatic breakdown of biomass to sugars. Indeed, many pretreatment strategies focus on removing a significant fraction of lignin from biomass to better enable saccharification. In order to better understand the fate of biomass lignins that remain with the solids following dilute acid pretreatment, we undertook a structural investigation to track lignins on and in biomass cell walls. SEM and TEM imaging revealed a range of droplet morphologies that appear on and within cell walls of pretreated biomass; as well as the specific ultrastructural regions that accumulate the droplets. These droplets were shown to contain lignin by FTIR, NMR, antibody labeling, and cytochemical staining. We provide evidence supporting the idea that thermochemical pretreatments reaching temperatures above the range for lignin phase transition cause lignins to coalesce into larger molten bodies that migrate within and out of the cell wall, and can redeposit on the surface of plant cell walls. This decompartmentalization and relocalization of lignins is likely to be at least as important as lignin removal in the quest to improve the digestibility of biomass for sugars and fuels production.

Deposition of Lignin Droplets Produced During Dilute Acid Pretreatment of Maize Stems Retards Enzymatic Hydrolysis of Cellulose

Electron microscopy of lignocellulosic biomass following high‐temperature pretreatment revealed the presence of spherical formations on the surface of the residual biomass. The hypothesis that these droplet formations are composed of lignins and possible lignin carbohydrate complexes is being explored. Experiments were conducted to better understand the formation of these “lignin” droplets and the possible implications they might have on the enzymatic saccharification of pretreated biomass. It was demonstrated that these droplets are produced from corn stover during pretreatment under neutral and acidic pH at and above 130 °C, and that they can deposit back onto the surface of residual biomass. The deposition of droplets produced under certain pretreatment conditions (acidic pH; T > 150 °C) and captured onto pure cellulose was shown to have a negative effect (5–20%) on the enzymatic saccharification of this substrate. It was noted that droplet density (per unit area) was greater and droplet size more variable under conditions where the greatest impact on enzymatic cellulose conversion was observed. These results indicate that this phenomenon has the potential to adversely affect the efficiency of enzymatic conversion in a lignocellulosic biorefinery.

Two-Stage Dilute-Acid Pretreatment of Softwoods

Whole treechips obtained from softwood forest thinnings were pretreated via single-and two-stage dilute-sulfuric acid pretreatment. Whole-tree chips were impregnated with dilute sulfuric acid and steam treated in a 4-L steam explosion reactor. In single-stage pretreatment, wood chips were treated using a wide range of severity. In two-stage pretreatment, the first stage was carried out at low severity tomaximize hemicellulose recovery. Solubilized sugars were recovered from the first-stage prehydrolysate by washing with water. In the second stage, water-insoluble solids from first-stage prehydrolysate were impregnated with dilute sulfuric acid, then steam treated at more severe conditions to hydrolyze a portion of the remaining cellulose to glucose and to improve the enzyme digestibility. The total sugar yields obtained after enzymatic hydrolysis of two-stage dilute acid-pretreated samples were compared with sugar yields from single-stage pretreatment. The overall sugar yield from two-stage dilute-acid pretreatment was approx 10% higher, and the net enzyme requirement was reduced by about 50%. Simultaneous saccharification and fermentation using an adapted Saccharomyces cerevisiae yeast strain further improved cellulose conversion yield and lowered the enzyme requirement.

Effects of Temperature and Moisture on Dilute-Acid Steam Explosion Pretreatment of Corn Stover and Cellulase Enzyme Digestibility

Corn stover is emerging as a viable feedstock for producing bioethanol from renewable resources. Dilute-acid pretreatment of corn stover can solubilize a significant portion of the hemicellulosic component and enhance the enzymatic digestibility of the remaining cellulose for fermentation into ethanol. In this study, dilute H2SO4 pretreatment of corn stover was performed in a steam explosion reactor at 160°C, 180°C, and 190°C, approx 1 wt% H2SO4, and 70-s to 840-s residence times. The combined severity (Log10 [Ro] - pH), an expression relating pH, temperature, and residence time of pretreatment, ranged from 1.8 to 2.4. Soluble xylose yields varied from 63 to 77% of theoretical from pretreatments of corn stover at 160 and 180°C. However, yields >90% of theoretical were found with dilute-acid pretreatments at 190°C. A narrower range of higher combined severities was required for pretreatment to obtain high soluble xylose yields when the moisture content of the acid-impregnated feedstock was increased from 55 to 63 wt%. Simultaneous saccharification and fermentation (SSF) of washed solids from corn stover pretreated at 190°C, using an enzyme loading of 15 filter paper units (FPU)/g of cellulose, gave ethanol yields in excess of 85%. Similar SSF ethanol yields were found using washed solid residues from 160 and 180°C pretreatments at similar combined severities but required a higher enzyme loading of approx 25 FPU/g of cellulose.

High Solids Simultaneous Saccharification and Fermentation of Pretreated Wheat Straw to Ethanol

Wheat straw was pretreated with dilute (0.5%) sulfuric acid at 140°C for 1 h. Pretreated straw solids were washed with deionized water to neutrality and then stored frozen at –20°C. The approximate composition of the pretreated straw solids was 64% cellulose, 33% lignin, and 2% xylan. The cellulose in the pretreated wheat straw solids was converted to ethanol in batch simultaneous saccharification and fermentation experiments at 37°C using cellulase enzyme fromTrichoderma reesei (Genencor 150 L) with or without supplementation with β–glucosidase fromAspergillus niger (Novozyme 188) to produce glucose sugar and the yeastSaccharomyces cerevisiae to ferment the glucose into ethanol. The initial cellulose concentrations were adjusted to 7.5, 10, 12.5, 15, 17.5, and 20% (w/w). Since wheat straw particles do not form slurries at these concentrations and cannot be mixed with conventional impeller mixers used in laboratory fermenters, a simple rotary fermenter was designed and fabricated for these experiments. The results of the simultaneous saccharification and fermentation (SSF) experiments indicate that the cellulose in pretreated wheat straw can be efficiently fermented into ethanol for up to a 15% cellulose concentration (24.4% straw concentration).

Dilute acid pretreatment of softwoods

Selective thinning of forests in the western United States will generate a large, sustainable quantity of softwood residues that can be an attractive feedstock for fuel ethanol production. The major species available from thinning of forests in northern California and the eastern Rocky Mountains include white fir (Abies concolor), Douglas fir (Pseudotsuga menziesii), and Ponderosa pine (Pinus ponderosa). Douglas fir chips were soaked in 0.4% sulfuric acid solution, then pretreated with steam at 200 – 230°C for 1 – 5 min. After pretreatment, 90 – 95% of the hemicellulose and as much as 20% of the cellulose was solubilized in water, and 90% of the remaining cellulose can be hydrolyzed to glucose by cellulase enzyme. The prehydrolysates, at as high as 10% total solid concentration, can be readily fermented by the unadapted yeastSaccharomyces cerevisiae D5A.

The impacts of deacetylation prior to dilute acid pretreatment on the bioethanol process

BackgroundDilute acid pretreatment is a promising pretreatment technology for the biochemical production of ethanol from lignocellulosic biomass. During dilute acid pretreatment, xylan depolymerizes to form soluble xylose monomers and oligomers. Because the xylan found in nature is highly acetylated, the formation of xylose monomers requires two steps: 1) cleavage of the xylosidic bonds, and 2) cleavage of covalently bonded acetyl ester groups.ResultsIn this study, we show that the latter may be the rate limiting step for xylose monomer formation. Furthermore, acetyl groups are also found to be a cause of biomass recalcitrance and hydrolyzate toxicity. While the removal of acetyl groups from native corn stover by alkaline de-esterification prior to pretreatment improves overall process yields, the exact impact is highly dependent on the corn stover variety in use. Xylose monomer yields in pretreatment generally increases by greater than 10%. Compared to pretreated corn stover controls, the deacetylated corn stover feedstock is approximately 20% more digestible after pretreatment. Finally, by lowering hydrolyzate toxicity, xylose utilization and ethanol yields are further improved during fermentation by roughly 10% and 7%, respectively. In this study, several varieties of corn stover lots were investigated to test the robustness of the deacetylation-pretreatment-saccharification-fermentation process.ConclusionsDeacetylation shows significant improvement on glucose and xylose yields during pretreatment and enzymatic hydrolysis, but it also reduces hydrolyzate toxicity during fermentation, thereby improving ethanol yields and titer. The magnitude of effect is dependent on the selected corn stover variety, with several varieties achieving improvements of greater than 10% xylose yield in pretreatment, 20% glucose yield in low solids enzymatic hydrolysis and 7% overall ethanol yield.

High-Throughput Screening Techniques for Biomass Conversion

High-throughput (HTP) screening of biomass or biomass-degrading enzymes, regardless of the desired outcome, is fraught with obstacles and challenges not typically faced in more traditional biotechnology. The enzyme systems are complex and synergistic and the substrate is highly heterogeneous, insoluble, and difficult to dispense. Digestions are often carried out for days at temperatures of 50°C or higher, leading to significant challenges regarding evaporation control in small well volumes. Furthermore, it is often desirable to condition or “pretreat” the biomass at extreme temperatures and/or pH to enhance enzyme digestibility. Once the substrate has been saccharified, evaluation of the extent and efficiency of conversion is made more difficult by time-consuming and tedious techniques used to measure the sugar products. Over the past decade or so, biomass researchers have creatively addressed these challenges by developing techniques to reduce biomass heterogeneity, uniformly distribute biomass samples at the small scale, pretreat the biomass at the small scale, quantitatively load these samples with enzymes, control evaporation of small reaction volumes for multiday incubations, and rapidly quantify the products. Other aspects of these measurements remain problematic and are being addressed. This review will address some of these challenges in detail, but more importantly, we will endeavor to educate the reader about the trials, tribulations, and pitfalls of carrying out HTP screening in biomass conversion research.

Recent Development in Chemical Depolymerization of Lignin: A Review

This article reviewed recent development of chemical depolymerization of lignins. There were five types of treatment discussed, including base-catalyzed, acid-catalyzed, metallic catalyzed, ionic liquids-assisted, and supercritical fluids-assisted lignin depolymerizations. The methods employed in this research were described, and the important results were marked. Generally, base-catalyzed and acid-catalyzed methods were straightforward, but the selectivity was low. The severe reaction conditions (high pressure, high temperature, and extreme pH) resulted in requirement of specially designed reactors, which led to high costs of facility and handling. Ionic liquids, and supercritical fluids-assisted lignin depolymerizations had high selectivity, but the high costs of ionic liquids recycling and supercritical fluid facility limited their applications on commercial scale biomass treatment. Metallic catalyzed depolymerization had great advantages because of its high selectivity to certain monomeric compounds and much milder reaction condition than base-catalyzed or acid-catalyzed depolymerizations. It would be a great contribution to lignin conversion if appropriate catalysts were synthesized.

Dilute acid hydrolysis of softwoods

Whole tree chips obtained from softwood forest thinnings were converted to ethanol via a two-stage dilute acid hydrolysis followed by yeast fermentation. The chips were first impregnated with dilute sulfuric acid, then pretreated in a steam explosion reactor to hydrolyze, more than 90% of the hemicellulose and approx 10% of the cellulose. The hydrolysate was filtered and washed with water to recover the sugars. The washed fibers were then subjected to a second acid im pregnation and hydrolysis to hydrolyze as much as 45% of the reamining cellulose. The liquors from both hydrolysates were combined and fermented to ethanol by a Saccharomyces cerevisiae yeast that had been adapted to the inhibitors. Based on available hexose sugars, ethanol yields varied from 74 to 89% of theoretical. Oligosaccharide contents higher than about 10% of the total available sugar appear to have a negative impact on ethanol yield.