Michael Conditt

Does total knee replacement restore normal knee function

Despite the advanced age of many patients having total knee arthroplasty, previous attempts to quantify patient function postoperatively have not allowed for normal deterioration of musculoskeletal function that occurs with aging. We determined the effects of aging on knee function, thereby providing a realistic level of normal, healthy knee function for patients and surgeons after total knee arthroplasties. A self-administered, validated knee function questionnaire consisting of 55 scaled multiple choice questions was used in this study. Responses were collected from 243 patients at least 1 year after they had total knee arthroplasties, and from 257 individuals (age- and gender-matched) who had no previous history of knee disorders. Many of these latter subjects reported that they could do most of the activities cited in the questionnaire without symptoms attributable to their knees. However, knee symptoms were experienced more frequently during activities that placed greater loads on the extremity. There was no difference in the knee function of men and women, and both groups had continuous deterioration in knee function with increasing age. There were large differences in the functional capacity to do activities involving the knee between the group of patients who had total knee arthroplasties and the age- and gender-matched patients with no previous knee disorders. Overall, 52% of the patients who had total knee arthroplasties reported some degree of limitation in doing functional activities, versus 22% of subjects with no previous knee disorders. Two groups of activities were identified: activities in which the patients and control subjects had essentially similar knee function (swimming, golfing, and stationary biking), and activities in which the function scores of the control group exceeded the scores of the patients who had total knee arthroplasties (kneeling, squatting, moving laterally, turning and cutting, carrying loads, stretching, leg strengthening, tennis, dancing, gardening, and sexual activity). Our data show that many of the limitations reported by patients after total knee arthroplasties are shared by individuals with no previous knee disorders. However, only approximately 40% of the functional deficit present after a total knee arthroplasty seems to be attributable to the normal physiologic effects of aging. Patients who had total knee replacements still experienced substantial functional impairment compared with their age- and gender-matched peers, especially when doing biomechanically demanding activities. This suggests that significant improvements in the procedure and prosthetic designs are needed to restore normal knee function after a total knee arthroplasty.

What functional activities are important to patients with knee replacements

There is interest in quantifying the patient’s function and mobility after joint replacement. The current study identified activities important to patients having total knee replacement and the prevalence of limitations to participation in these activities. A Total Knee Function Questionnaire consisting of 55 questions addressing the patient’s participation in various activities was developed, validated, and mailed to 367 patients at least 1 year after knee replacement. Patients were asked the frequency with which they did each activity, the activity’s importance to them, and the extent to which their participation was limited by their knee replacement. The questionnaire was returned by 176 patients, 40% men and 60% women, with an average age of 70.5 years. The most prevalent activities were stretching exercises (73%), leg strengthening exercises (70%), kneeling (58%), and gardening (57%). The activities most important to the patients were stretching exercises (56%), kneeling (52%), and gardening (50%); those most difficult were squatting (75%), kneeling (72%), and gardening (54%). The current study showed a high correlation between the importance of activities and frequency of patient participation confirming that knee replacement successfully restores a significant degree of function. However, after knee replacement, improvements in knee function still are needed to allow patients to do all activities that they consider important.

Backside Wear of Polyethylene Tibial Inserts: Mechanism and Magnitude of Material Loss

BACKGROUND Wear of the underside of modular tibial inserts (backside wear) in total knee replacements has been reported by several authors. Although, for some implant designs, this phenomenon seems to contribute to osteolysis, the actual volume of material lost through wear of the backside surface has not been quantified. This study describes the results of computerized measurements of tibial inserts of one design known to be associated with a high prevalence of backside wear in situ. METHODS A series of retrieved total knee components of one design were examined. The duration of implantation of the retrieved components ranged from thirty-six to 146 months. Laser surface profilometry and computer-aided design software were used to develop individual three-dimensional models of each worn, retrieved tibial insert to compare with scanned unused inserts. Volumetric subtraction of both models revealed the material lost because of backside wear. RESULTS Worn and unworn areas on the backside surface were easily identified by stereomicroscopy and laser profilometry. The computer reconstructions showed that, in all retrievals, all unworn surfaces on the nonarticulating surface lay in one plane. The average volume (and standard deviation) of the material lost because of backside wear was 925 +/- 637 mm(3) (range, 197 to 2720 mm(3)). On the basis of the time in situ for each implant, the average volumetric wear rate was 138 +/- 95 mm(3)/yr. CONCLUSIONS The predicted volume of material removed because of backside wear is substantial and may be sufficient to induce osteolysis. Our results suggest that peg-like protrusions are not generated by the extrusion of polyethylene into screw-holes within the base-plate but by abrasion of the underside of the bearing insert, leaving the protruding pegs as the only remnants of the original surface.

Factors Affecting the Severity of Backside Wear of Modular Tibial Inserts

BACKGROUND The use of modular tibial components in total knee arthroplasty introduces a possible source of polyethylene wear at the nonarticulating (backside) surface. However, it is not known whether this phenomenon is an incidental finding observed in unique specimens or is a feature common to all modular components. The purpose of this study was to determine the type and severity of backside wear in retrieved tibial inserts of several common total knee designs. METHODS One hundred and twenty-four polyethylene tibial inserts of twelve different designs were retrieved at revision total knee replacements after implantation periods ranging from zero to 180 months. Each insert was visually inspected with use of a stereomicroscope for seven different modes of surface damage in four quadrants defining the backside surface. RESULTS Pitting, burnishing, and measurable polyethylene protrusions were observed on the backside of polyethylene inserts of implant designs with a variety of different capture mechanisms. Across all implant designs, pitting was observed in 90% of the retrieved specimens; burnishing, in 77%; and protrusion, in 61%. Overall, implants of the IB-II (Insall-Burstein-II) design (Zimmer) exhibited the most severe burnishing, whereas those of the Duracon design (Howmedica) had the most severe pitting. Severe protrusions were noted with inserts of one design (AMK [Anatomic Modular Knee]; DePuy). A longer time in situ was associated with larger polyethylene protrusions, but the severity of pitting and burnishing did not increase with increasing duration of implantation. CONCLUSIONS Moderate-to-severe wear of the nonarticulating surface of the tibial insert was frequently observed in all designs of knee prostheses, independent of the capture mechanism. These results indicate that new designs of modular tibial components are needed to prevent the generation of polyethylene wear debris through backside wear of total knee replacements.

Implant Durability and Knee Function After Total Knee Arthroplasty in the Morbidly Obese Patient

This study investigated the effect of body mass index (BMI) on outcomes after cemented tricompartmental total knee arthroplasty (TKA). Functional and radiographic Knee Society scores in 71 patients (94 knees) with BMI 30 to 39 and 31 patients (41 knees) with BMI > or =40 were compared with 67 patients (85 knees) with BMI 20 to 29 at a mean follow-up of 5.4 years. Total knee arthroplasty rates of success (79%), complication (17%), and revision (6%) were independent of BMI. The BMI > or =40 group, however, was 5.4x (95% confidence interval, 2.1-14.7) more likely to develop patellar radiolucencies, had poorer hamstring and quadriceps conditioning, and had more patellofemoral symptoms. Forty percent of TKAs at BMI > or =40 with patellar radiolucencies failed. In conclusion, TKA benefits were realized at all BMI, but at BMI > or =40, more rehabilitation and monitoring are recommended.

Comparison of 2 femoral tunnel locations in anatomic single-bundle anterior cruciate ligament reconstruction: A biomechanical study

PURPOSE To evaluate knee stability after anterior cruciate ligament (ACL) reconstruction using 2 modern clinically relevant single-bundle constructs. METHODS Two arthroscopic ACL reconstructions were performed on 6 fresh-frozen human cadaveric knees using bone-patellar tendon-bone autografts. The tibial tunnel was centered in the anatomic tibial footprint. The femoral tunnel was reamed through the anteromedial (AM) portal and centered alternately in either the AM portion of the femoral footprint (center-AM) or the center of the femoral footprint (center-center). Two external loading conditions were applied: (1) a 134-N anterior tibial load and (2) a 10-Nm valgus load combined with a 5-Nm internal tibial torque. Resulting kinematics were determined under 4 conditions: (1) ACL intact, (2) ACL deficient, (3) center-AM reconstruction, and (4) center-center reconstruction. RESULTS In response to anterior tibial loading, anterior translation was similar in the ACL-intact knee and the 2 reconstructions at 0° to 60° of flexion but was greater in the reconstructed specimens at 90°. In response to the complex rotatory load, internal tibial rotation (ITR) at 30° of flexion was slightly greater in center-AM knees compared with ACL-intact knees (11.0° ± 0.6° v 10.5° ± 0.6°, P = .03). At other angles tested, ITR in both reconstructions was similar to the ACL-intact knee (P > .05). When we compared the 2 reconstruction alternatives, however, center-center knees exhibited greater resistance to ITR at all angles (P < .05). CONCLUSION Anatomic single-bundle ACL reconstruction performed with the femoral tunnel placed through the AM portal restores translational and rotational knee stability to an extent that closely approximates the ACL-intact condition. When compared with the AM femoral tunnel position, a femoral tunnel positioned in the anatomic center of the femoral origin of the ACL may further improve rotatory stability without sacrificing anterior stability. CLINICAL RELEVANCE This study provides additional biomechanical evidence in support of anatomic single-bundle ACL reconstruction with tunnels positioned in the center of the femoral and tibial footprints.

Mechanical alignment of tibial stems in revision total knee arthroplasty

This multicenter, retrospective study evaluates the radiographic results of achieving optimal tibial alignment in revision total knee arthroplasty (TKA) using a single modular CoCr cemented or cementless stemmed implant design. Stem size and length also were evaluated. The hundred ninety-nine revision TKAs were performed between January 1993 and January 1996 by 13 experienced revision knee surgeons. The cases were subdivided into 5 comparative groups: (1) cemented stems, (2) 140-mm length canal-filling stems, (3) 140-mm length non-canal-filling stems, (4) 95-mm length canal-filling stems, and (5) 95-mm length non-canal-filling stems. The anteroposterior (AP) tibial alignment angle was measured. The canal-filling ratio (CFR) was determined by dividing the stem diameter by the endosteal diameter at the stem tip. Overall, the ability to achieve tibial alignment in the AP plane was more predictable when canal-filling (CFR >/= 0.85) cementless stems were used. This was further enhanced when long canal-filling cementless stems were selected. The least-predictable results and the highest probability of varus malalignment were achieved with cemented stems.

Backside Wear of Modular Ultra-High Molecular Weight Polyethylene Tibial Inserts

BACKGROUND The capture mechanisms of modular tibial total knee components may allow relative micromotion between the insert and the base-plate, leading to wear at the nonarticulating (backside) surface. Although retrieved components often display laxity in the capture mechanism in the unloaded condition, the magnitude of the relative motion that actually occurs under physiologic conditions has not been determined. This study was performed to assess the impact of different modes of knee-loading on the relative micromotion between the insert and the base-plate and the relationship between the duration that the implant had been in situ and the severity of backside wear. METHODS Twenty-one posterior-stabilized total knee replacements of one common design (Insall-Burstein II) were retrieved at one to 100 months after implantation. The extent and severity of backside wear was graded with use of stereomicroscopy. All components were soaked in a bath (of physiologic saline solution at 37 degrees C for four days prior to reassembly. The relative micromotion between the insert and the base-plate of each specimen was measured in vitro in two different conditions: with no axial load and with a combination of loads and torques simulating the stance phase of gait. RESULTS The capture mechanism laxity between the insert and the tibial base-plate in the unloaded condition was approximately eight times larger than the micromotion measured during simulated gait. The capture mechanism laxity allowed a mean (and standard deviation) of 618 +/- 226 micro m of total relative micromotion compared with 103 +/- 54 micro m of relative micromotion during the gait cycle. Under both loading conditions, the predominant direction of interface motion was medial-lateral. No correlation was found between the magnitude of capture mechanism laxity and the relative micromotion measured during simulated gait (p = 0.11). Larger polyethylene protrusions on the backside surface did not correlate with less micromotion (p = 0.48) or with capture mechanism laxity (p = 0.06). CONCLUSIONS For the implant design that was studied, capture mechanism laxity between the modular insert and the base-plate in the unloaded condition was an order of magnitude larger than and not indicative of the micromotion that occurred during simulated physiologic loading. In addition, polyethylene protrusions into the screw-holes of tibial base-plates did not seat or lock the insert in place and reduce relative motion. CLINICAL RELEVANCE While some clearance between the insert and the base-plate is required to allow assembly of modular tibial components at the time of surgery, the amount of relative interface motion during a functional activity such as normal gait, which can produce potentially damaging wear debris, is unknown. However, the compressive forces applied to the articular surface during a functional activity may substantially reduce micromotion between the insert and the base-plate relative to the unloaded condition.

Comparison of isometric and anatomic reconstruction of the medial patellofemoral ligament: a cadaveric study.

Recent surgical procedures designed to correct recurrent posttraumatic lateral patellar instability focus on reconstructing the medial patellofemoral ligament. This study evaluated and compared patellofemoral kinematics of isometric and anatomic medial patellofemoral ligament reconstructions. Using an infrared motion capture analysis system, patellar tracking was evaluated in the coronal plane in 6 cadaveric specimens. Reconstruction of the medial patellofemoral ligament using an isometric technique did not restore normal patellar tracking at any flexion angle; however, reconstruction using an anatomic technique restored statistically normal patellar tracking from maximal knee extension to 28 degrees of flexion. Neither technique was able to restore normal kinematics in deeper angles of knee flexion.

Surface Damage of Patellar Components Used in Total Knee Arthroplasty

BACKGROUND Patellofemoral complications are a common cause of failure of total knee replacement. In this study, we examined eighty-five patellar components that had been retrieved for a variety of reasons after a mean of 71.9 months in vivo. The objective of this study was to identify factors contributing to surface damage of patellar components in total knee replacements. METHODS The retrieved patellar components were of three primary designs: dome-shaped, sombrero-shaped, and pseudo-anatomic. Five zones on each specimen were evaluated for five different types of damage (creep, pitting, delamination, abrasion, and burnishing). The severity of the damage was assigned a score of 0 to 4, with 0 indicating no damage and 4 indicating extreme damage. The extent of the damage was also assigned a score of 0 to 4, with 0 indicating 0% and 4 indicating 76% to 100%. An asymmetry ratio was calculated for each damage pattern to evaluate the uniformity of the distribution of the damage across each component. RESULTS Eighty-six percent of the components had a damage score of > or =4 (product of the extent and severity scores) for at least one damage mechanism (creep for 38% of the components, pitting for 47%, delamination for 26%, abrasion for 49%, and burnishing for 76%). Components that had been in situ for more than two years had significantly more severe creep, delamination, and burnishing than components that had been in place for less than two years. Metal-backed designs had more severe damage than all-polyethylene components. Factors that reduced the occurrence and severity of polyethylene damage were a congruent patellar design (a non-dome-shaped component) and the use of an asymmetric femoral component. CONCLUSIONS Damage to the patellar component was a common finding, particularly when the implant had been retrieved more than two years after implantation. Moreover, delamination was frequently found on the patellar components, as has been observed by others who examined retrieved tibial inserts. The results of this study suggest that the use of congruent patellar components may reduce damage.