Michael DiPirro

Scientific motivation and technology requirements for the SPIRIT and SPECS far-infrared/submillimeter space interferometers

Far infrared interferometers in space would enable extraordinary measurements of the early universe, the formation of galaxies, stars, and planets, and would have great discovery potential. Since half the luminosity of the universe and 98% of the photons released since the Big Bang are now observable at far IR wavelengths (40 - 500 micrometers ), and the Earths atmosphere prevents sensitive observations from the ground, this is one of the last unexplored frontiers of space astronomy. We present the engineering and technology requirements that stem from a set of compelling scientific goals and discuss possible configurations for two proposed NASA missions, the Space Infrared Interferometric Telescope and the Submillimeter Probe of the Evolution of Cosmic Structure.

The Astro-H High Resolution Soft X-Ray Spectrometer

We present the overall design and performance of the Astro-H (Hitomi) Soft X-Ray Spectrometer (SXS). The instrument uses a 36-pixel array of x-ray microcalorimeters at the focus of a grazing-incidence x-ray mirror Soft X-Ray Telescope (SXT) for high-resolution spectroscopy of celestial x-ray sources. The instrument was designed to achieve an energy resolution better than 7 eV over the 0.3-12 keV energy range and operate for more than 3 years in orbit. The actual energy resolution of the instrument is 4-5 eV as demonstrated during extensive ground testing prior to launch and in orbit. The measured mass flow rate of the liquid helium cryogen and initial fill level at launch predict a lifetime of more than 4 years assuming steady mechanical cooler performance. Cryogen-free operation was successfully demonstrated prior to launch. The successful operation of the SXS in orbit, including the first observations of the velocity structure of the Perseus cluster of galaxies, demonstrates the viability and power of this technology as a tool for astrophysics.

Soft x-ray spectrometer (SXS): The high-resolution cryogenic spectrometer onboard ASTRO-H

We present the development status of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H mission. The SXS provides the capability of high energy-resolution X-ray spectroscopy of a FWHM energy resolution of < 7eV in the energy range of 0.3 – 10 keV. It utilizes an X-ray micorcalorimeter array operated at 50 mK. The SXS microcalorimeter subsystem is being developed in an EM-FM approach. The EM SXS cryostat was developed and fully tested and, although the design was generally confirmed, several anomalies and problems were found. Among them is the interference of the detector with the micro-vibrations from the mechanical coolers, which is the most difficult one to solve. We have pursued three different countermeasures and two of them seem to be effective. So far we have obtained energy resolutions satisfying the requirement with the FM cryostat.

A Multi-Stage Continuous-Duty Adiabatic Demagnetization Refrigerator

The design of a multi-stage adiabatic demagnetization refrigerator (ADR) that can provide continuous cooling at very low temperatures is presented. The ADR is being developed for use in x-ray, IR and sub-millimeter space astronomy missions which will employ large format detector arrays operating at 50 mK and lower and which may dissipate up to 10 μW. It is also being designed to reject heat slowly to a relatively warm heat sink (in the 6–10 K range), so that future missions may use mechanical cryocoolers instead of liquid helium for pre-cooling. The continuous nature of the device gives it a much higher cooling power per unit mass, allowing it to be much smaller and lighter than existing ADRs with comparable performance. Design details are discussed.

A compact, high-performance continuous magnetic refrigerator for space missions

Abstract We present test results of the first adiabatic demagnetization refrigerator (ADR) that produce true continuous cooling at sub-kelvin temperatures. This system uses multiple stages that operate in sequence to cascade heat from a “continuous” stage up to a heat sink. Continuous operation avoids the usual constraints of long hold times and short recycle times that lead to the generally large mass of single-shot ADRs, and allows us to achieve much higher cooling power per unit mass. Our design goal is 10 μW of cooling at 50 mK while rejecting heat to a 6–10 K heat sink. The total cold mass is estimated to be less than 10 kg, including magnetic shielding of each stage. These parameters envelop the requirements for currently planned astronomy missions. The relatively high temperature heat rejection capability allows it to operate with a mechanical cryocooler as part of a cryogen-free, low temperature cooling system. This has the advantages of long mission life and reduced complexity and cost. At present, we have assembled a three-stage ADR that operates with a superfluid helium bath. Additional work is underway to develop magnetocaloric materials that can extend its heat rejection capability up to 10 K. Design, operation and performance of the ADR are discussed.

The Superfluid Helium On-Orbit Transfer (Shoot) Flight Experiment

The SHOOT flight demonstration is being undertaken to verify component and system level technology necessary to resupply large superfluid helium dewars in space. The baseline configuration uses two identical 210 liter dewars connected by a transfer line which contains a quick disconnect coupling. The helium will be transferred back and forth between the dewars under various conditions of flow rate, parasitic heat load, and temperature. An astronaut Extra-vechicular Activity (EVA) is also planned to manually demate and mate the coupling. A number of components necessary for the flight are being developed. These components are described here.

In-orbit operation of the ASTRO-H SXS

We summarize all the in-orbit operations of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H (Hit- omi) satellite. The satellite was launched on 2016/02/17 and the communication with the satellite ceased on 2016/03/26. The SXS was still in the commissioning phase, in which the setups were progressively changed. This article is intended to serve as a reference of the events in the orbit to properly interpret the SXS data taken during its short life time, and as a test case for planning the in-orbit operation for future micro-calorimeter missions.

The x-ray microcalorimeter on the NeXT mission

The Soft X-ray Spectrometer (SXS) onboard the NeXT (New exploration X-ray Telescope) is an X-ray spectrometer utilizing an X-ray microcalorimeter array. Combined with the soft X-ray telescope of 6 m focal length, the instrument will have a ~ 290cm2 effective at 6.7 keV. With the large effective area and the energy resolution as good as 6 eV (FWHM), the instrument is very suited for the high-resolution spectroscopy of iron K emission line. One of the major scientific objectives of SXS is to determine turbulent and/or macroscopic motions of the hot gas in clusters of galaxies of up to z ~ 1. The instruments will use 6 × 6 or 8 × 8 format microcalorimeter array which is similar to that of Suzaku XRS. The detector will be cooled to a cryogenic temperature of 50 mK by multi-stage cooling system consisting of adiabatic demagnetization refrigerator, super fluid He, a 3He Joule Thomson cooler, and double-stage stirling cycle cooler.

Magnetic shielding for sensitive detectors

Abstract This paper describes the design and test of shielding for a superconducting magnet. The magnet is part of an Adiabatic Demagnetization Refrigerator (ADR) for the Submillimeter and Far Infrared Experiment (SAFIRE), a payload on the Stratospheric Observatory for Infrared Astronomy (SOFIA). SAFIRE will use superconducting detectors which must be shielded from the magnet cooling system. Because the detectors use Superconducting Quantum Interference Devices (SQUIDs), the field at the detector package must remain at or below the 10−7 T level while the detectors are operating. We discuss laboratory tests of the passive shielding and simulations using Poisson group programs.

Performance of the helium dewar and cryocoolers of ASTRO-H SXS

The Soft X-ray Spectrometer (SXS) is a cryogenic high-resolution X-ray spectrometer onboard the ASTRO-H satellite, that achieves energy resolution better than 7 eV at 6 keV, by operating the detector array at 50 mK using an adiabatic demagnetization refrigerator. The cooling chain from room temperature to the ADR heat sink is composed of 2-stage Stirling cryocoolers, a 4He Joule-Thomson cryocooler, and super uid liquid He, and is installed in a dewar. It is designed to achieve a helium lifetime of more than 3 years with a minimum of 30 liters. The satellite was launched on 2016 February 17, and the SXS worked perfectly in orbit, until March 26 when the satellite lost its function. It was demonstrated that the heat load on the He tank was about 0.7 mW, which would have satisfied the lifetime requirement. This paper describes the design, results of ground performance tests, prelaunch operations, and initial operation and performance in orbit of the flight dewar and cryocoolers.