Michael J. Zdilla

H2-driven deoxygenation of epoxides and diols to alkenes catalyzed by methyltrioxorhenium.

Catalytic deoxygenation of epoxides and diols is underdeveloped. This reaction is appealing in the context of making value-added organics from biomass. Methyltrioxorhenium (MTO) catalyzes the conversion of epoxides and vicinal diols to olefins with dihydrogen (H(2)) as the reductant under reasonably mild conditions (150 degrees C and 80-300 psi). The only reaction byproduct is water. The reaction is selective for cis cyclic diols, signaling a mechanism of alkene extrusion from a coordinated epoxide via a metallaoxetane intermediate.

Mechanism of and exquisite selectivity for O–O bond formation by the heme-dependent chlorite dismutase

Chlorite dismutase (Cld) is a heme b-dependent, O–O bond forming enzyme that transforms toxic chlorite (ClO2−) into innocuous chloride and molecular oxygen. The mechanism and specificity of the reaction with chlorite and alternate oxidants were investigated. Chlorite is the sole source of dioxygen as determined by oxygen-18 labeling studies. Based on ion chromatography and mass spectrometry results, Cld is highly specific for the dismutation of chlorite to chloride and dioxygen with no other side products. Cld does not use chlorite as an oxidant for oxygen atom transfer and halogenation reactions (using cosubstrates guaiacol, thioanisole, and monochlorodimedone, respectively). When peracetic acid or H2O2 was used as an alternative oxidant, oxidation and oxygen atom transfer but not halogenation reactions occurred. Monitoring the reaction of Cld with peracetic acid by rapid-mixing UV-visible spectroscopy, the formation of the high valent compound I intermediate, [(Por•+)FeIV = O], was observed [k1 = (1.28 ± 0.04) × 106 M−1 s−1]. Compound I readily decayed to form compound II in a manner that is independent of peracetic acid concentration (k2 = 170 ± 20 s−1). Both compound I and a compound II-associated tryptophanyl radical that resembles cytochrome c peroxidase (Ccp) compound I were observed by EPR under freeze-quench conditions. The data collectively suggest an O–O bond-forming mechanism involving generation of a compound I intermediate via oxygen atom transfer from chlorite, and subsequent recombination of the resulting hypochlorite and compound I.

Nickel Confined in the Interlayer Region of Birnessite: an Active Electrocatalyst for Water Oxidation

We report a synthetic method to enhance the electrocatalytic activity of birnessite for the oxygen evolution reaction (OER) by intercalating Ni(2+) ions into the interlayer region. Electrocatalytic studies showed that nickel (7.7 atomic %)-intercalated birnessite exhibits an overpotential (η) of 400 mV for OER at an anodic current of 10 mA cm(-2) . This η is significantly lower than the η values for birnessite (η≈700 mV) and the active OER catalyst β-Ni(OH)2 (η≈550 mV). Molecular dynamics simulations suggest that a competition among the interactions between the nickel cation, water, and birnessite promote redox chemistry in the spatially confined interlayer region.

Effect of Interlayer Spacing on the Activity of Layered Manganese Oxide Bilayer Catalysts for the Oxygen Evolution Reaction

We investigated the dependence of the electrocatalytic activity for the oxygen evolution reaction (OER) on the interlayer distance of five compositionally distinct layered manganese oxide nanostructures. Each individual electrocatalyst was assembled with a different alkali metal intercalated between two nanosheets (NS) of manganese oxide to form a bilayer structure. Manganese oxide NS were synthesized via the exfoliation of a layered material, birnessite. Atomic force microscopy was used to determine the heights of the bilayer catalysts. The interlayer spacing of the supported bilayers positively correlates with the size of the alkali cation: NS/Cs+/NS > NS/Rb+/NS > NS/K+/NS > NS/Na+/NS > NS/Li+/NS. The thermodynamic origins of these bilayer heights were investigated using molecular dynamics simulations. The overpotential (η) for the OER correlates with the interlayer spacing; NS/Cs+/NS has the lowest η (0.45 V), while NS/Li+/NS exhibits the highest η (0.68 V) for OER at a current density of 1 mA/cm2. Kinetic parameters (η and Tafel slope) associated with NS/Cs+/NS for the OER were superior to that of the bulk birnessite phase, highlighting the structural uniqueness of these nanoscale assemblies.

Copper-Intercalated Birnessite as a Water Oxidation Catalyst

We report a synthetic method to increase the catalytic activity of birnessite toward water oxidation by intercalating copper in the interlayer region of the layered manganese oxide. Intercalation of copper, verified by XRD, XPS, ICP, and Raman spectroscopy, was accomplished by exposing a suspension of birnessite to a Cu(+)-bearing precursor molecule that underwent disproportionation in solution to yield Cu(0) and Cu(2+). Electrocatalytic studies showed that the Cu-modified birnessite exhibited an overpotential for water oxidation of ∼490 mV (at 10 mA/cm(2)) and a Tafel slope of 126 mV/decade compared to ∼700 mV (at 10 mA/cm(2)) and 240 mV/decade, respectively, for birnessite without copper. Impedance spectroscopy results suggested that the charge transfer resistivity of the Cu-modified sample was significantly lower than Cu-free birnessite, suggesting that Cu in the interlayer increased the conductivity of birnessite leading to an enhancement of water oxidation kinetics. Density functional theory calculations show that the intercalation of Cu(0) into a layered MnO2 model structure led to a change of the electronic properties of the material from a semiconductor to a metallic-like structure. This conclusion from computation is in general agreement with the aforementioned impedance spectroscopy results. X-ray photoelectron spectroscopy (XPS) showed that Cu(0) coexisted with Cu(2+) in the prepared Cu-modified birnessite. Control experiments using birnessite that was decorated with only Cu(2+) showed a reduction in water oxidation kinetics, further emphasizing the importance of Cu(0) for the increased activity of birnessite. The introduction of Cu(0) into the birnessite structure also increased the stability of the electrocatalyst. At a working current of 2 mA, the Cu-modified birnessite took ∼3 times longer for the overpotential for water oxdiation to increase by 100 mV compared to when Cu was not present in the birnessite.

Manganese(III) Corrole-Oxidant Adduct as the Active Intermediate in Catalytic Hydrogen Atom Transfer

Hydrogen atom transfer (HAT) reactions from dihydroanthracene to ArINTs (Ar = 2- tert-butylsulfonyl)benzene and Ts = p-toluenesulfonyl) is catalyzed by Mn(tpfc) (tpfc = 5,10,15-tris(pentafluorophenyl)corrole). Kinetics of HAT was monitored by gas chromatography. Conversion to the major products anthracene, TsNH 2, and ArI is too fast to be explained by direct HAT from the terminal imido complex TsN=Mn(tpfc), which forms from the reaction of Mn(tpfc) with ArINTs. Steady-state kinetics, isotope effects, and variation of the initial catalyst form (Mn (III)(tpfc) vs TsN=Mn (V)(tpfc)) support a mechanism in which the active catalytic species is an adduct of manganese(III) with the oxidant, (ArINTs)Mn (III)(tpfc). This species was detected by rapid-scan stopped-flow absorption spectroscopy. Kinetic simulations demonstrated the viability of this mechanism in contrast to other proposals.

Enantioselective Synthesis of Cocaine C-1 Analogues using Sulfinimines (N-Sulfinyl Imines)

The first examples of cocaine analogues having substituents (methyl, ethyl, n-propyl, n-pentyl, and phenyl) at the C-1 position of the cocaine tropane skeleton were prepared by heating sulfinimine-derived α,β-unsaturated pyrrolidine nitrones. In the presence of the Lewis acid Al(O(t)Bu)(3) the nitrones undergo an intramolecular [3 + 2] cycloaddition to give tricyclic isoxazolidines that were transformed in three steps to the cocaine analogues. In the absence of the Lewis acid, lactams were formed resulting from rearrangement of the nitrone to an oxaziridine. A novel Pd- and base-promoted rearrangement of methanesulfonate salts of isoxazolidine to bridge bicyclic[4.2.1]isoxazolidines was discovered.

Synthesis of a high-valent, four-coordinate manganese cubane cluster with a pendant Mn atom: photosystem II-inspired manganese-nitrogen clusters.

High-valent, four-coordinate manganese imido- and nitrido-bridged heterodicubane clusters have been prepared and characterized by single-crystal X-ray diffraction and spectroscopic techniques. The title compound, a corner-nitride-fused dicubane with the chemical formula [Mn(5)Li(3)(μ(6)-N)(N)(μ(3)-N(t)Bu)(6)(μ-N(t)Bu)(3)(N(t)Bu)] (1), has been prepared as an adduct with a nearly isostructural tetramanganese cluster with one Mn atom replaced by Li. An important feature of the reported chemistry is the formation of nitride from tert-butylamide, indicative of N-C bond cleavage facilitated by manganese.

Acceleration of an aromatic Claisen rearrangement via a designed spiroligozyme catalyst that mimics the ketosteroid isomerase catalytic dyad.

A series of hydrogen-bonding catalysts have been designed for the aromatic Claisen rearrangement of a 1,1-dimethylallyl coumarin. These catalysts were designed as mimics of the two-point hydrogen-bonding interaction present in ketosteroid isomerase that has been proposed to stabilize a developing negative charge on the ether oxygen in the migration of the double bond.1 Two hydrogen bond donating groups, a phenol alcohol and a carboxylic acid, were grafted onto a conformationally restrained spirocyclic scaffold, and together they enhance the rate of the Claisen rearrangement by a factor of 58 over the background reaction. Theoretical calculations correctly predict the most active catalyst and suggest that both preorganization and favorable interactions with the transition state of the reaction are responsible for the observed rate enhancement.

Frustrated Solvation Structures Can Enhance Electron Transfer Rates

Polar surfaces can interact strongly with nearby water molecules, leading to the formation of highly ordered interfacial hydration structures. This ordering can lead to frustration in the hydrogen bond network, and, in the presence of solutes, frustrated hydration structures. We study frustration in the hydration of cations when confined between sheets of the water oxidation catalyst manganese dioxide. Frustrated hydration structures are shown to have profound effects on ion-surface electron transfer through the enhancement of energy gap fluctuations beyond those expected from Marcus theory. These fluctuations are accompanied by a concomitant increase in the electron transfer rate in Marcuss normal regime. We demonstrate the generality of this phenomenon-enhancement of energy gap fluctuations due to frustration-by introducing a charge frustrated XY model, likening the hydration structure of confined cations to topological defects. Our findings shed light on recent experiments suggesting that water oxidation rates depend on the cation charge and Mn-oxidation state in these layered transition metal oxide materials.