Michael Olsen
International Maize and Wheat Improvement Center
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Michael Olsen.
Heredity | 2015
Xuecai Zhang; Paulino Pérez-Rodríguez; Kassa Semagn; Yoseph Beyene; Raman Babu; M A López-Cruz; F. M. San Vicente; Michael Olsen; Edward S. Buckler; J-L Jannink; Boddupalli M. Prasanna; José Crossa
One of the most important applications of genomic selection in maize breeding is to predict and identify the best untested lines from biparental populations, when the training and validation sets are derived from the same cross. Nineteen tropical maize biparental populations evaluated in multienvironment trials were used in this study to assess prediction accuracy of different quantitative traits using low-density (~200 markers) and genotyping-by-sequencing (GBS) single-nucleotide polymorphisms (SNPs), respectively. An extension of the Genomic Best Linear Unbiased Predictor that incorporates genotype × environment (GE) interaction was used to predict genotypic values; cross-validation methods were applied to quantify prediction accuracy. Our results showed that: (1) low-density SNPs (~200 markers) were largely sufficient to get good prediction in biparental maize populations for simple traits with moderate-to-high heritability, but GBS outperformed low-density SNPs for complex traits and simple traits evaluated under stress conditions with low-to-moderate heritability; (2) heritability and genetic architecture of target traits affected prediction performance, prediction accuracy of complex traits (grain yield) were consistently lower than those of simple traits (anthesis date and plant height) and prediction accuracy under stress conditions was consistently lower and more variable than under well-watered conditions for all the target traits because of their poor heritability under stress conditions; and (3) the prediction accuracy of GE models was found to be superior to that of non-GE models for complex traits and marginal for simple traits.
Theoretical and Applied Genetics | 2016
Yongsheng Wu; Felix San Vicente; Kaijian Huang; Thanda Dhliwayo; Denise E. Costich; Kassa Semagn; Nair Sudha; Michael Olsen; Boddupalli M. Prasanna; Xuecai Zhang; Raman Babu
Key messageMolecular characterization information on genetic diversity, population structure and genetic relationships provided by this research will help maize breeders to better understand how to utilize the current CML collection.AbstractCIMMYT maize inbred lines (CMLs) have been widely used all over the world and have contributed greatly to both tropical and temperate maize improvement. Genetic diversity and population structure of the current CML collection and of six temperate inbred lines were assessed and relationships among all lines were determined with genotyping-by-sequencing SNPs. Results indicated that: (1) wider genetic distance and low kinship coefficients among most pairs of lines reflected the uniqueness of most lines in the current CML collection; (2) the population structure and genetic divergence between the Temperate subgroup and Tropical subgroups were clear; three major environmental adaptation groups (Lowland Tropical, Subtropical/Mid-altitude and Highland Tropical subgroups) were clearly present in the current CML collection; (3) the genetic diversity of the three Tropical subgroups was similar and greater than that of the Temperate subgroup; the average genetic distance between the Temperate and Tropical subgroups was greater than among Tropical subgroups; and (4) heterotic patterns in each environmental adaptation group estimated using GBS SNPs were only partially consistent with patterns estimated based on combining ability tests and pedigree information. Combining current heterotic information based on combining ability tests and the genetic relationships inferred from molecular marker analyses may be the best strategy to define heterotic groups for future tropical maize improvement. Information resulting from this research will help breeders to better understand how to utilize all the CMLs to select parental lines, replace testers, assign heterotic groups and create a core set of breeding germplasm.
G3: Genes, Genomes, Genetics | 2017
Xuecai Zhang; Paulino Pérez-Rodríguez; Juan Burgueño; Michael Olsen; Edward S. Buckler; Gary N. Atlin; Boddupalli M. Prasanna; Mateo Vargas; Felix San Vicente; José Crossa
Genomic selection (GS) increases genetic gain by reducing the length of the selection cycle, as has been exemplified in maize using rapid cycling recombination of biparental populations. However, no results of GS applied to maize multi-parental populations have been reported so far. This study is the first to show realized genetic gains of rapid cycling genomic selection (RCGS) for four recombination cycles in a multi-parental tropical maize population. Eighteen elite tropical maize lines were intercrossed twice, and self-pollinated once, to form the cycle 0 (C0) training population. A total of 1000 ear-to-row C0 families was genotyped with 955,690 genotyping-by-sequencing SNP markers; their testcrosses were phenotyped at four optimal locations in Mexico to form the training population. Individuals from families with the best plant types, maturity, and grain yield were selected and intermated to form RCGS cycle 1 (C1). Predictions of the genotyped individuals forming cycle C1 were made, and the best predicted grain yielders were selected as parents of C2; this was repeated for more cycles (C2, C3, and C4), thereby achieving two cycles per year. Multi-environment trials of individuals from populations C0, C1, C2, C3, and C4, together with four benchmark checks were evaluated at two locations in Mexico. Results indicated that realized grain yield from C1 to C4 reached 0.225 ton ha−1 per cycle, which is equivalent to 0.100 ton ha−1 yr−1 over a 4.5-yr breeding period from the initial cross to the last cycle. Compared with the original 18 parents used to form cycle 0 (C0), genetic diversity narrowed only slightly during the last GS cycles (C3 and C4). Results indicate that, in tropical maize multi-parental breeding populations, RCGS can be an effective breeding strategy for simultaneously conserving genetic diversity and achieving high genetic gains in a short period of time.
The Plant Genome | 2017
Shiliang Cao; Alexander Loladze; Yibing Yuan; Yongsheng Wu; Ao Zhang; Jiafa Chen; G.M. Huestis; Jingsheng Cao; V. Chaikam; Michael Olsen; Boddupalli M. Prasanna; F.M. San Vicente; Xuecai Zhang
Association and linkage mapping are effective for dissecting genetic architecture of complex traits in maize. TSC resistance in maize is controlled by a major QTL and several minor QTL. Major QTL on bin 8.03 confirmed by association and linkage mapping. TSC resistance in tropical maize could be improved by MAS and GS individually or stepwise.
Frontiers in Plant Science | 2017
Ao Zhang; Hongwu Wang; Yoseph Beyene; Kassa Semagn; Yubo Liu; Shiliang Cao; Zhenhai Cui; Yanye Ruan; Juan Burgueño; Felix San Vicente; Michael Olsen; Boddupalli M. Prasanna; José Crossa; Haiqiu Yu; Xuecai Zhang
Genomic selection is being used increasingly in plant breeding to accelerate genetic gain per unit time. One of the most important applications of genomic selection in maize breeding is to predict and select the best un-phenotyped lines in bi-parental populations based on genomic estimated breeding values. In the present study, 22 bi-parental tropical maize populations genotyped with low density SNPs were used to evaluate the genomic prediction accuracy (rMG) of the six trait-environment combinations under various levels of training population size (TPS) and marker density (MD), and assess the effect of trait heritability (h2), TPS and MD on rMG estimation. Our results showed that: (1) moderate rMG values were obtained for different trait-environment combinations, when 50% of the total genotypes was used as training population and ~200 SNPs were used for prediction; (2) rMG increased with an increase in h2, TPS and MD, both correlation and variance analyses showed that h2 is the most important factor and MD is the least important factor on rMG estimation for most of the trait-environment combinations; (3) predictions between pairwise half-sib populations showed that the rMG values for all the six trait-environment combinations were centered around zero, 49% predictions had rMG values above zero; (4) the trend observed in rMG differed with the trend observed in rMG/h, and h is the square root of heritability of the predicted trait, it indicated that both rMG and rMG/h values should be presented in GS study to show the accuracy of genomic selection and the relative accuracy of genomic selection compared with phenotypic selection, respectively. This study provides useful information to maize breeders to design genomic selection workflow in their breeding programs.
BMC Genomics | 2017
Berhanu Tadesse Ertiro; Kassa Semagn; Biswanath Das; Michael Olsen; M. T. Labuschagne; Mosisa Worku; Dagne Wegary; Girum Azmach; Veronica Ogugo; Tolera Keno; Beyene Abebe; Temesgen Chibsa; Abebe Menkir
BackgroundMolecular characterization is important for efficient utilization of germplasm and development of improved varieties. In the present study, we investigated the genetic purity, relatedness and population structure of 265 maize inbred lines from the Ethiopian Institute of Agricultural Research (EIAR), the International Maize and Wheat Improvement Centre (CIMMYT) and the International Institute of Tropical Agriculture (IITA) using 220,878 single nucleotide polymorphic (SNP) markers obtained using genotyping by sequencing (GBS).ResultsOnly 22% of the inbred lines were considered pure with <5% heterogeneity, while the remaining 78% of the inbred lines had a heterogeneity ranging from 5.1 to 31.5%. Pairwise genetic distances among the 265 inbred lines varied from 0.011 to 0.345, with 89% of the pairs falling between 0.301 and 0.345. Only <1% of the pairs had a genetic distance lower than 0.200, which included 14 pairs of sister lines that were nearly identical. Relative kinship analysis showed that the kinship coefficients for 59% of the pairs of lines was close to zero, which agrees with the genetic distance estimates. Principal coordinate analysis, discriminant analysis of principal components (DAPC) and the model-based population structure analysis consistently suggested the presence of three groups, which generally agreed with pedigree information (genetic background). Although not distinct enough, the SNP markers showed some level of separation between the two CIMMYT heterotic groups A and B established based on pedigree and combining ability information.ConclusionsThe high level of heterogeneity detected in most of the inbred lines suggested the requirement for purification or further inbreeding except those deliberately maintained at early inbreeding level. The genetic distance and relative kinship analysis clearly indicated the uniqueness of most of the inbred lines in the maize germplasm available for breeders in the mid-altitude maize breeding program of Ethiopia. Results from the present study facilitate the maize breeding work in Ethiopia and germplasm exchange among breeding programs in Africa. We suggest the incorporation of high density molecular marker information in future heterotic group assignments.
Plant Breeding | 2017
Berhanu Tadesse Ertiro; Yoseph Beyene; Biswanath Das; Stephen Mugo; Michael Olsen; Sylvester O. Oikeh; Collins Juma; M. T. Labuschagne; Boddupalli M. Prasanna
Abstract Drought and poor soil fertility are among the major abiotic stresses affecting maize productivity in sub‐Saharan Africa. Maize breeding efforts at the International Maize and Wheat Improvement Center (CIMMYT) have focused on incorporating drought stress tolerance and nitrogen‐use efficiency (NUE) into tropical maize germplasm. The objectives of this study were to estimate the general combining ability (GCA) and specific combining ability (SCA) of selected maize inbred lines under drought stress (DS), low‐nitrogen (LN) and optimum moisture and nitrogen (optimum) conditions, and to assess the yield potential and stability of experimental hybrids under these management conditions. Forty‐nine experimental three‐way cross hybrids, generated from a 7 × 7 line by tester crosses, and six commercial checks were evaluated across 11 optimum, DS and LN sites in Kenya in 2014 using an alpha lattice design with two replicates per entry at each site. DS reduced both grain yield (GY) and plant height (PH), while anthesis–silking interval (ASI) increased under both DS and LN. Hybrids ‘L4/T2’ and ‘L4/T1’ were found to be superior and stable, while inbreds ‘L4’ and ‘L6’ were good combiners for GY and other secondary traits across sites. Additive variance played a greater role for most traits under the three management conditions, suggesting that further progress in the improvement of these traits should be possible. GY under optimum conditions was positively correlated with GY under both DS and LN conditions, but GY under DS and LN was not correlated. Our results suggest the feasibility for simultaneous improvement in grain yield performance of genotypes under optimum, DS and LN conditions.
Molecular Breeding | 2018
Manje Gowda; Yoseph Beyene; Dan Makumbi; Kassa Semagn; Michael Olsen; Jumbo M. Bright; Biswanath Das; Stephen Mugo; L. M. Suresh; Boddupalli M. Prasanna
In sub-Saharan Africa, maize is the key determinant of food security for smallholder farmers. The sudden outbreak of maize lethal necrosis (MLN) disease is seriously threatening the maize production in the region. Understanding the genetic basis of MLN resistance is crucial. In this study, we used four biparental populations applied linkage mapping and joint linkage mapping approaches to identify and validate the MLN resistance-associated genomic regions. All populations were genotyped with low to high density markers and phenotyped in multiple environments against MLN under artificial inoculation. Phenotypic variation for MLN resistance was significant and heritability was moderate to high in all four populations for both early and late stages of disease infection. Linkage mapping revealed three major quantitative trait loci (QTL) on chromosomes 3, 6, and 9 that were consistently detected in at least two of the four populations. Phenotypic variance explained by a single QTL in each population ranged from 3.9% in population 1 to 43.8% in population 2. Joint linkage association mapping across three populations with three biometric models together revealed 16 and 10 main effect QTL for MLN-early and MLN-late, respectively. The QTL identified on chromosomes 3, 5, 6, and 9 were consistent with the QTL identified by linkage mapping. Ridge regression best linear unbiased prediction with five-fold cross-validation revealed high accuracy for prediction across populations for both MLN-early and MLN-late. Overall, the study discovered and validated the presence of major effect QTL on chromosomes 3, 6, and 9 which can be potential candidates for marker-assisted breeding to improve the MLN resistance.
Molecular Breeding | 2014
Kassa Semagn; Raman Babu; Sarah Hearne; Michael Olsen
Crop Science | 2015
Yoseph Beyene; Kassa Semagn; Stephen Mugo; Amsal Tarekegne; Raman Babu; Barbara Meisel; Pierre Sehabiague; Dan Makumbi; Cosmos Magorokosho; Sylvester O. Oikeh; John Gakunga; Mateo Vargas; Michael Olsen; Boddupalli M. Prasanna; Marianne Bänziger; José Crossa