Ming-Yong Han

Quantum-dot-tagged microbeads for multiplexed optical coding of biomolecules

Multicolor optical coding for biological assays has been achieved by embedding different-sized quantum dots (zinc sulfide–capped cadmium selenide nanocrystals) into polymeric microbeads at precisely controlled ratios. Their novel optical properties (e.g., size-tunable emission and simultaneous excitation) render these highly luminescent quantum dots (QDs) ideal fluorophores for wavelength-and-intensity multiplexing. The use of 10 intensity levels and 6 colors could theoretically code one million nucleic acid or protein sequences. Imaging and spectroscopic measurements indicate that the QD-tagged beads are highly uniform and reproducible, yielding bead identification accuracies as high as 99.99% under favorable conditions. DNA hybridization studies demonstrate that the coding and target signals can be simultaneously read at the single-bead level. This spectral coding technology is expected to open new opportunities in gene expression studies, high-throughput screening, and medical diagnostics.

Luminescent quantum dots for multiplexed biological detection and imaging

Recent advances in nanomaterials have produced a new class of fluorescent labels by conjugating semiconductor quantum dots with biorecognition molecules. These nanometer-sized conjugates are water-soluble and biocompatible, and provide important advantages over organic dyes and lanthanide probes. In particular, the emission wavelength of quantum-dot nanocrystals can be continuously tuned by changing the particle size, and a single light source can be used for simultaneous excitation of all different-sized dots. High-quality dots are also highly stable against photobleaching and have narrow, symmetric emission spectra. These novel optical properties render quantum dots ideal fluorophores for ultrasensitive, multicolor, and multiplexing applications in molecular biotechnology and bioengineering.

Janus Au‐TiO2 Photocatalysts with Strong Localization of Plasmonic Near‐Fields for Efficient Visible‐Light Hydrogen Generation

The first use of non-centrosymmetric Janus Au-TiO(2) photocatalysts in efficient, plasmon-enhanced visible-light hydrogen generation is demonstrated. The intense localization of plasmonic near-fields close to the Au-TiO(2) interface, coupled with optical transitions involving localized electronic states in amorphous TiO(2) brings about enhanced optical absorption and the generation of electron-hole pairs for photocatalysis.

Composition-Tunable Alloyed Semiconductor Nanocrystals

The ability to engineer the band gap energy of semiconductor nanocrystals has led to the development of nanomaterials with many new exciting properties and applications. Band gap engineering has thus proven to be an effective tool in the design of new nanocrystal-based semiconductor devices. As reported in numerous publications over the last three decades, tuning the size of nanocrystalline semiconductors is one way of adjusting the band gap energy. On the other hand, research on band gap engineering via control of nanocrystal composition, which is achieved by adjusting the constituent stoichiometries of alloyed semiconductors, is still in its infancy. In this Account, we summarize recent research on colloidal alloyed semiconductor nanocrystals that exhibit novel composition-tunable properties. Alloying of two semiconductors at the nanometer scale produces materials that display properties distinct not only from the properties of their bulk counterparts but also from those of their parent semiconductors. As a result, alloyed nanocrystals possess additional properties that are composition-dependent aside from the properties that emerge due to quantum confinement effects. For example, although the size-dependent emission wavelength of the widely studied CdSe nanocrystals can be continuously tuned to cover almost the entire visible spectrum, the near-infrared (NIR) region is far outside its spectral range. By contrast, certain alloy compositions of nanocrystalline CdSe(x)Te(1-x), an alloy of CdSe and CdTe, can efficiently emit light in the NIR spectral window. These NIR-emitting nanocrystals are potentially useful in several biomedical applications. In addition, highly stable nanocrystals formed by alloying CdSe with ZnSe (i.e., Zn(x)Cd(1-x)Se) emit blue light with excellent efficiency, a property seldom achieved by the parent binary systems. As a result, these materials can be used in short-wavelength optoelectronic devices. In the future, we foresee new discoveries related to these interesting nanoalloys. In particular, colloidal semiconductor nanoalloys that exhibit composition-dependent magnetic properties have yet to be reported. Further studies of the alloying mechanism are also needed to develop improved synthetic strategies for the preparation of these alloyed nanomaterials.

Silica-Coated Metal Nanoparticles

The advanced high-quality synthesis of dense and porous silica-coated nanostructures is enjoying ever-increasing research interests for their important properties and diverse applications, especially for catalytic, controlled release, colorimetric diagnostics, photothermal therapy, surface enhanced Raman scattering (SERS) detection, and so forth. In this timely Focus Review, we summarize the up-to-date synthesis strategies, improved properties, and emerging applications of silica-coated metal nanoparticles. In particular, the large scale synthesis of silica-coated metal nanoparticles and the recent development of hollowed-out silica-coated metal nanoparticles by silica dissolution are emphasized for new and practical applications.

A simple, reliable and sensitive colorimetric visualization of melamine in milk by unmodified gold nanoparticles

In this paper, we report a simple, reliable and sensitive colourimetric visualization of melamine in milk products using citrate-stabilized gold nanoparticles (Au NPs). Upon exposure to ppb-level melamine, gold nanoparticle solution exhibits a highly sensitive colour change from red to blue and rapid aggregation kinetics within the initial 5 min, which can directly be seen with the naked eye and monitored by UV-vis absorbance spectra. As confirmed by the comparison with six other typical amino compounds, the melamine molecule itself contains multiple strong-binding sites to the surface of Au NPs and thus plays a role of molecular linker to efficiently crosslink Au NPs. Further evidence is that the sensitivity is significantly improved when NaHSO(4) is added to promote the ligand exchange between citrate and melamine at the surface of Au NPs. The NaHSO(4)-optimized Au NPs system provides a rapid colourimetric assay for the rapid detection of melamine down to approximately 25 ppb in real milk products.

Protein Induces Layer-by-Layer Exfoliation of Transition Metal Dichalcogenides

Here, we report a general and facile method for effective layer-by-layer exfoliation of transition metal dichalcogenides (TMDs) and graphite in water by using protein, bovine serum albumin (BSA) to produce single-layer nanosheets, which cannot be achieved using other commonly used bio- and synthetic polymers. Besides serving as an effective exfoliating agent, BSA can also function as a strong stabilizing agent against reaggregation of single-layer nanosheets for greatly improving their biocompatibility in biomedical applications. With significantly increased surface area, single-layer MoS2 nanosheets also exhibit a much higher binding capacity to pesticides and a much larger specific capacitance. The protein exfoliation process is carefully investigated with various control experiments and density functional theory simulations. It is interesting to find that the nonpolar groups of protein can firmly bind to TMD layers or graphene to expose polar groups in water, facilitating the effective exfoliation of single-layer nanosheets in aqueous solution. The present work will enable to optimize the fabrication of various 2D materials at high yield and large scale, and bring more opportunities to investigate the unique properties of 2D materials and exploit their novel applications.

Silk Fibroin for Flexible Electronic Devices

Flexible electronic devices are necessary for applications involving unconventional interfaces, such as soft and curved biological systems, in which traditional silicon-based electronics would confront a mechanical mismatch. Biological polymers offer new opportunities for flexible electronic devices by virtue of their biocompatibility, environmental benignity, and sustainability, as well as low cost. As an intriguing and abundant biomaterial, silk offers exquisite mechanical, optical, and electrical properties that are advantageous toward the development of next-generation biocompatible electronic devices. The utilization of silk fibroin is emphasized as both passive and active components in flexible electronic devices. The employment of biocompatible and biosustainable silk materials revolutionizes state-of-the-art electronic devices and systems that currently rely on conventional semiconductor technologies. Advances in silk-based electronic devices would open new avenues for employing biomaterials in the design and integration of high-performance biointegrated electronics for future applications in consumer electronics, computing technologies, and biomedical diagnosis, as well as human-machine interfaces.

Plasmonic gold nanocrosses with multidirectional excitation and strong photothermal effect.

We report a facile chemical synthesis of well-defined gold nanocrosses through anisotropic growth along both <110> and <001>, whereas gold nanorods grow only along either <110> or <001>. The multiple branching was achieved by breaking the face-centered-cubic lattice symmetry of gold through copper-induced formation of single or double twins, and the resulting gold nanocrosses exhibited pronounced near-IR absorption with a great extension to the mid-IR region. As studied by discrete dipole approximation (DDA) simulations, the entire nanocross gets excited even when one of the branches is exposed to incident light. The above properties make them useful as octopus antennas for capturing near-IR light for effective photothermal destruction of cells. The cell damage process was analyzed using the Arrhenius model, and its intrinsic thermodynamic characteristics were determined quantitatively. Besides effective photothermal treatment and two-photon luminescence imaging, the near- and mid-IR-absorbing gold nanocrosses may also find applications in IR sensing, thermal imaging, telecommunications, and the like.

Recent progress of atomic layer deposition on polymeric materials

As a very promising surface coating technology, atomic layer deposition (ALD) can be used to modify the surfaces of polymeric materials for improving their functions and expanding their application areas. Polymeric materials vary in surface functional groups (number and type), surface morphology and internal structure, and thus ALD deposition conditions that typically work on a normal solid surface, usually do not work on a polymeric material surface. To date, a large variety of research has been carried out to investigate ALD deposition on various polymeric materials. This paper aims to provide an in-depth review of ALD deposition on polymeric materials and its applications. Through this review, we will provide a better understanding of surface chemistry and reaction mechanism for controlled surface modification of polymeric materials by ALD. The integrated knowledge can aid in devising an improved way in the reaction between reactant precursors and polymer functional groups/polymer backbones, which will in turn open new opportunities in processing ALD materials for better inorganic/organic film integration and potential applications.