Minkook Kim

Risk assessment of zinc oxide, a cosmetic ingredient used as a UV filter of sunscreens

ABSTRACT Zinc oxide (ZnO), an inorganic compound that appears as a white powder, is used frequently as an ingredient in sunscreens. The aim of this review was to examine the toxicology and risk assessment of ZnO based upon available published data. Recent studies on acute, sub-acute, and chronic toxicities of ZnO indicated that this compound is virtually non-toxic in animal models. However, it was reported that ZnO nanoparticles (NP) (particle size, 40 nm) induced significant changes in anemia-related hematologic parameters and mild to moderate pancreatitis in male and female Sprague-Dawley rats at 536.8 mg/kg/day in a 13-week oral toxicity study. ZnO displayed no carcinogenic potential, and skin penetration is low. No-observed-adverse-effect level (NOAEL) ZnO was determined to be 268.4 mg/kg/day in a 13-week oral toxicity study, and a maximum systemic exposure dose (SED) of ZnO was estimated to be 0.6 mg/kg/day based on topical application of sunscreen containing ZnO. Subsequently, the lowest margin of safety (MOS) was estimated to be 448.2, which indicates that the use of ZnO in sunscreen is safe. A risk assessment was undertaken considering other routes of exposure (inhalation or oral) and major product types (cream, lotion, spray, and propellant). Human data revealed that MOS values (7.37 for skin exposure from cream and lotion type; 8.64 for skin exposure of spray type; 12.87 for inhalation exposure of propellant type; 3.32 for oral exposure of sunscreen) are all within the safe range (MOS > 1). Risk assessment of ZnO indicates that this compound may be used safely in cosmetic products within the current regulatory limits of 25% in Korea.

Growth of Millimeter-Scale Vertically Aligned Carbon Nanotubes by Microwave Plasma Chemical Vapor Deposition

Millimeter-scale, vertically aligned carbon nanotubes (CNTs) were grown at a relatively low temperature of 700 °C by the microwave plasma chemical vapor deposition. Oxygen and water were used to investigate their role in the growth rate and crystallinity of CNTs. Scanning electron microscopy and transmission electron microscopy were adopted to observe the height and number of walls of the CNTs, respectively. The addition of oxygen significantly increased the growth rate of CNTs (~23 µm/min) for 70 min, which is three and two times higher than that of normal CNTs and water-assisted CNTs, respectively. Furthermore, the high growth rate was maintained for 220 min and the crystallinity of CNTs, which was evaluated by the G to D band ratio in Raman spectra, was also greatly improved only by introducing oxygen.

Indium-induced triple-period atomic wires on a vicinal Si(111) surface: In/Si(557)

An indium-induced one-dimensional (1D) surface reconstruction on a Si(557) surface was studied by the combined approach of scanning tunneling microscopy (STM) and first principles calculations. Low-energy electron diffraction revealed a (1◊3) phase with a triple-period along the step edge direction, which was also confirmed by STM. The STM images showed that the 1D structure consists of two atomic chains. One is located on the terrace and consists of triple-period bright protrusions. The other shows a weak ◊3 modulation at the step edge. Five atomic structure models based on the In adatom of a In/Si(111)- p 3◊ p 3 surface were considered to figure out the underlying structure of the STM images of the In/Si(557)-1◊3 surface. Interestingly, a heterogeneous In-Si adatom chain model reproduced most of the features of STM images and was the most stable energetically at a wide range of In chemical potential.

Heat-driven size manipulation of Fe catalytic nanoparticles for precise control of single-walled carbon nanotube diameter

Size-tailored Fe catalytic nanoparticles (NPs) were formed by a heat-driven evaporation process, and precise control of single-walled carbon nanotube (SWCNT) diameter was achieved. The size and surface concentration of Fe NPs significantly decreased with increasing evaporation temperature, which was investigated by transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy. TEM and Raman spectroscopy revealed that the synthesis of SWCNTs with an extremely narrow diameter distribution was achieved and their diameter can be manipulated by evaporation temperature. This diameter-controlled growth of SWCNTs is a step towards SWCNT-based applications.

Optimum Thickness of Al2O3 Support Layer for Growth of Singlewalled Carbon Nanotubes

An optimum thickness of Al2O3 support layer (ASL) for growth of singlewalled carbon nanotubes (SWCNTs) was systematically established. Atomic force microscopy and scanning electron microscopy results clearly revealed that increasing ASL thickness (tASL) resulted in increased ASL grain diameter and root mean square roughness. This significantly affected the diameters of CNTs through the restricted formation of Fe nanoparticles. As a result, SWCNTs and multiwalled CNTs were simultaneously synthesized using ASLs with tASL = 5, 50, and 100 nm, which were confirmed using Raman spectroscopy and transmission electron microscopy. In contrast, ASLs with tASL = 10–30 nm, were suitable for predominant growth of SWCNTs, and ASL with tASL = 15 nm was especially effective for growing high-quality SWCNTs with a small diameter and narrow distribution, 1.1±0.15 nm.

Non-cancer, cancer, and dermal sensitization risk assessment of heavy metals in cosmetics

ABSTRACT The heavy metal content of cosmetics may be a cause for concern in that exposure to these metals is associated with adverse consequences. Thus, the aim of this study was to assess consequences attributed to exposure to heavy metals in cosmetics as determined by non-cancer, cancer, and sensitization risks methodologies. The quantification and exposure assessments of aluminum (Al), chromium (Cr), manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), lead (Pb), mercury (Hg), cadmium (Cd), antimony (Sb), and titanium (Ti) were performed by inductively coupled plasma-mass spectrometry. The non-cancer risk assessment of Al, Cr3+, Mn, Fe, Co, Ni, Cu, Zn, Cd, Sb, and Ti in cosmetic samples resulted in a margin of safety (MOS) greater than 100 or a hazard index (HI) of less than 1. However, the probability of lifetime cancer risk (LCR) resulting from dermal exposure to heavy metals from cosmetics exceeded the acceptable risk levels (LCR > 10–5). An exposure-based sensitization quantitative risk assessment determined that the ratios of acceptable exposure level to consumers for Ni, Co, Cu, or Hg were above 1, suggesting an absence of skin-sensitizing potential. For an average daily user of lip cosmetics, the estimated intakes of heavy metals were within the acceptable daily intake (ADI). The percentage of heavy users for which metal intakes exceeded ADIs were 20.37% for Pb, 9.26% for Mn, 1.85% for Cr3+, and 1.85% for Cr6+, respectively. Data suggested that the heavy metals present in cosmetics do not appear to pose a serious risk to health. However, for heavy users of lip cosmetics, contamination with some heavy metals, such as Pb, Mn, and Cr needs to be minimized.

Formation and inhibition of N-nitrosodiethanolamine in cosmetics under pH, temperature, and fluorescent, ultraviolet, and visual light

ABSTRACT N-nitrosodiethanolamine (NDELA), a type of nitrosamine, is a possible human carcinogen that may form in cosmetic products. The aim of this study was to examine the formation and inhibition of NDELA through chemical reactions of secondary amines including mono-ethanolamine, di-ethanolamine (DEA), and tri-ethanolamine (TEA), and sodium nitrite (SN) under varying conditions such as pH, temperature, and fluorescent, ultraviolet (UV), and visual light (VIS) using liquid chromatography-mass spectroscopy. In a mixture of TEA and SN under acidic conditions pH 2, residual NDELA concentrations rose significantly under various storage conditions in the following order: 50°C > 40°C > UV (2 W/m2) > VIS (4000 lux) > fluorescent light > 25°C > 10°C. In a mixture of DEA and SN under the same acidic pH 2 conditions, NDELA formation was significantly elevated in the following order: UV (2 W/m2) > VIS (4000 lux) > 50°C > 40°C > fluorescent light > 25°C > 10°C. Inhibition of NDELA formation by d-mannitol, vitamin C (Vit C), or vitamin E (Vit E) was determined under varying conditions of pH, temperature, and fluorescent, UV, and VIS. At high concentrations of 100 or 1000 µg/ml, Vit E significantly decreased residual NDELA compared with control levels under acidic pH 2, but not under basic pH 6. Among various antioxidants, Vit E reacted more effectively with many nitrosating agents such as nitrate and nitrite found in cosmetic products. Therefore, to reduce NDELA, it is recommended that cosmetics be stored under cool/amber conditions and that Vit E or Vit C inhibitors of nitrosation be optimally added to cosmetic formulations at concentrations between 100 and 1000 µg/ml.

Risk assessment of N-nitrosodiethylamine (NDEA) and N-nitrosodiethanolamine (NDELA) in cosmetics

ABSTRACT N-nitrosamines and their precursors found in cosmetics may be carcinogenic in humans. Thus the aim of this study was to carry out risk assessment for N-nitrosamines (N-nitrosodiethanolamine [NDELA], N-nitrosodiethylamine [NDEA]) and amines (triethanolamine [TEA], diethanolamine [DEA]) levels in cosmetics determined using validated liquid chromatography–tandem mass spectrometry (LC–MS/MS) procedures. NDELA and NDEA concentrations were present at levels of “not detected” (N.D.) to 596.5 μg/kg and N.D. to 40.9 μg/kg, respectively. TEA and DEA concentrations ranged from N.D. to 860 μg/kg and N.D. to 26.22 μg/kg, respectively. The nitrite concentration (3–2250 mg/l), number of nitrosating agents to a maximum 5, and pH (3.93–10.09) were also assessed. The impact of N-nitrosamine formation on the levels of TEA, DEA, nitrite, and other nitrosating agents was also examined. N-nitrosamine concentrations correlated with the number of nitrosating agents and nitrite concentrations. Data demonstrated that higher nitrite concentrations and a greater number of nitrosating agents increased NDELA and NDEA yields. Further, the presence of TEA and DEA exerted a significant influence on N-nitrosamine formation. Risk assessments, including the margin of exposure (MOE) and lifetime cancer risk (LCR) for N-nitrosamines and margin of safety (MOS) for amines, were calculated using product type, use pattern, and concentrations. Exposure to maximum amounts of NDELA and NDEA resulted in MOE > 10,000 (based upon the benchmark dose lower confidence limit 10%) and LCR <1 × 10−5, respectively. In addition, TEA and DEA concentrations in cosmetic samples resulted in MOS values >100. Therefore, no apparent safety concerns were associated with cosmetic products containing NDELA, NDEA, TEA, and DEA in this study. However, since amines and nitrosating agents produce carcinogenic nitrosamines, their use in cosmetics needs to be minimized to levels as low as technically feasible.

Detoxifying effect of pyridoxine on acetaminophen-induced hepatotoxicity via suppressing oxidative stress injury

The detoxifying effect of pyridoxine against acetaminophen (APAP)-induced hepatotoxicity was investigated. HepG2 cells were co-treated with APAP and pyridoxine to compare with betaine or methionine for 24 h. LDH, ALT and AST activities were measured to determine direct cells damage in vitro and in vivo. Lipid peroxidation, antioxidant enzymes activity, and glutathione level were measured. Cytochrome c releaseand procaspase-3, cleaved caspase-3, Bcl-2, or Bax protein levels were measured to determine APAP-induced apoptotic cell death. Pyridoxine treatment significantly increased cell viability and decreased leakage of LDH activity against APAP-induced hepatotoxicity in HepG2 cells. ALT and AST activities were dose-dependently reduced by pyridoxine treatment compared to APAP-treated group. Significant increases in activities of GST and GPx were observed after co-treatment with APAP and pyridoxine. Although APAP-induced Nrf2 and HO-1 expression levels were gradually reduced in HepG2 cells by pyridoxine treatment, induction of antioxidant enzymes activities were dose-dependently increased. These protected effects of pyridoxine against APAP-induced hepatoxicity were closely associated with suppression of APAP-induced oxidative stress and apoptotic cell death in HepG2 cells. These data indicated that the protective action of pyridoxine against hepatic cell injuries was involved in the direct antioxidant activity which provides a pivotal mechanism for its potential hepatoprotective action.

Design and control of inductive power transfer system for electric vehicles considering wide variation of output voltage and coupling coefficient

In this paper, a design and control of the inductive power transfer (IPT) system for electric vehicles are proposed considering wide variation of output voltage and coupling coefficient. The characteristics of the proposed system and a design method of the resonant network are also suggested. By utilizing the battery management converter at the final stage of the system, the design and control can be simplified while managing the output voltage and power of the battery. The 3.3kW laboratory prototype with magnetic power pads are manufactured and the validity of the proposed system is verified through the experimental results of the laboratory prototype.