Mio Akiyama

Femoral anteversion is correlated with acetabular version and coverage in Asian women with anterior and global deficient subgroups of hip dysplasia: a CT study.

ObjectiveMorphological correlation between the acetabulum and femur at the hip joint is still controversial. We tested the hypothesis that femoral anteversion correlates with acetabular version and coverage in patients with developmental dysplasia of the hip (DDH).Materials and methodsUsing pelvic computed tomography (CT) images of 79 hips in 49 Asian women with DDH and 49 normal hips, we measured femoral anteversion, the axial and vertical acetabular version and the acetabular sector angle (ASA) to demarcate femoral head coverage. Depending on the location of the acetabular bone defect, dysplastic hips were divided into three subgroups: the anterior, global and posterior deficiency groups. We performed a comparative analysis between dysplastic and normal hips using the Wilcoxon rank sum test, and a relative analysis between femoral anteversion and acetabular measurements in dysplastic hips using Pearson’s correlation coefficient.ResultsThe amount of femoral anteversion in dysplastic hips was greater and more variable than in normal hips (p < 0.0001, p = 0.0277 respectively). Femoral anteversion in dysplastic hips correlated significantly with acetabular anteversion in the groups with anterior and global deficiency subgroups (p < 0.05, r = 0.2990, p < 0.05, r = 0.451 respectively), but not with the posterior deficiency subgroup. Femoral anteversion also correlated with vertical acetabular version. When acetabular coverage was examined, significant correlations were noted between femoral anteversion and anterior and superior coverage, but not with posterior coverage. These correlations were not observed in normal hips.ConclusionsOur results showed significantly greater and more variable femoral anteversion in DDH, and a significant correlation between femoral anteversion and acetabular version and coverage in DDH with anterior and global acetabular bone deficiency.

Pelvic deformity influences acetabular version and coverage in hip dysplasia.

BackgroundAlthough a wide variety of acetabular deformities in developmental dysplasia of the hip (DDH) have been reported, the morphologic features of the entire pelvis in DDH are not well characterized and their correlation with acetabular deformity is unknown.Questions/purposesWe determined whether there was a rotational deformity of the entire innominate bone, and if so, whether it related to acetabular version and coverage.Patients and MethodsWe examined the morphologic features of the pelvis using CT for 50 patients with DDH (82 hips). Forty normal hips were used as controls. The innominate rotation angle was determined at three levels in the axial plane. The acetabular sector angle served as an indicator of acetabular coverage of the femoral head. We evaluated the association between innominate rotation angles and acetabular version and coverage.ResultsWe observed greater internal rotation of the innominate bone in patients with DDH than in the control subjects. Internal rotation of the innominate bone was associated with increased acetabular anteversion angle and acetabular inclination angle. In hips with acetabular retroversion (nine of 82 hips; 11.0 %), the entire innominate bone was externally rotated, compared with hips with acetabular anteversion. Internal rotation of the innominate bone also was associated with decreased anterior and superior acetabular coverage.ConclusionOur observations suggest structural abnormalities exist throughout the pelvis in DDH, and the morphologic abnormalities of the acetabulum are not caused solely by local dysplasia around the hip, but are influenced by the morphologic features of the entire pelvis.Level of EvidenceLevel IV, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Acetabular tilt correlates with acetabular version and coverage in hip dysplasia.

BackgroundThe rotational position of the acetabulum to the pelvis (acetabular tilt) may influence acetabular version and coverage of the femoral head. To date, the pathologic significance of acetabular tilt in hip dysplasia is unknown.Questions/PurposesWe determined whether acetabular tilt in hip dysplasia is different from that in normal hips and whether this correlates with acetabular version and coverage.MethodsWe measured the acetabular tilt angle on the lateral view of three-dimensional pelvic CT images of 40 patients (72 hips) with hip dysplasia. Forty normal hips from 40 patients were used as controls. The acetabular sector angle was measured as an index for acetabular coverage of the femoral head.ResultsThe mean acetabular tilt angle was increased in dysplastic hips compared with controls. In dysplastic hips, a posteriorly rotated acetabulum (increased acetabular tilt) was associated with increased acetabular anteversion and with decreased anterior and anterosuperior acetabular coverage. No correlation was found in controls. In dysplastic hips with a posterior acetabular deficiency, the acetabulum was rotated anteriorly (decreased acetabular tilt) compared with hips with anterior and lateral deficiencies.ConclusionsWe observed a correlation between the rotational position of the acetabulum in the pelvis with acetabular version and coverage in hip dysplasia. Our observations confirmed anterior rotation of the acetabular fragment during periacetabular osteotomies is an anatomically reasonable maneuver for hips with anterolateral acetabular deficiencies, while the maneuver can exacerbate posterior coverage and should be avoided in hips with a posterior acetabular deficiency.Level of EvidenceLevel IV, diagnostic study. See the Guidelines for Authors for a complete description of levels of evidence.

Wear resistant performance of highly cross-linked and annealed ultra-high molecular weight polyethylene against ceramic heads in total hip arthroplasty

The purpose of this study was to examine the effects of ceramic femoral head material, size, and implantation periods on the wear of annealed, cross‐linked ultra‐high molecular weight polyethylene (UHMWPE) (XLPE) in total hip arthroplasty compared to non‐cross‐linked conventional UHMWPE (CPE). XLPE was fabricated by cross‐linking with 60 kGy irradiation and annealing. Femoral heads made from zirconia and alumina ceramics and cobalt–chrome (CoCr) of 22 or 26 mm diameter were used. In this retrospective cohort study, the femoral head penetration into the cup was measured digitally on radiographs of 367 hips with XLPE and 64 hips with CPE. The average follow‐up periods were 6.3 and 11.9 years, respectively. Both XLPE creep and wear rates were significantly lower than those of CPE (0.19 mm vs. 0.44 mm, 0.0001 mm/year vs. 0.09 mm/year, respectively). Zirconia displayed increased wear rates compared to alumina in CPE; however, there was no difference among head materials in XLPE (0.0008, 0.00007, and −0.009 mm/year for zirconia, alumina, and CoCr, respectively). Neither head size or implantation period impacted XLPE wear. In contrast to CPE, XLPE displayed low wear rates surpassing the effects of varying femoral head material, size, implantation period, and patient demographics. Further follow‐up is required to determine the long‐term clinical performance of the annealed XLPE.

Late failure of annealed highly cross-linked polyethylene acetabular liner.

Highly cross-linked polyethylene (HXPE) in total hip arthroplasty (THA) has been shown to significantly decrease wear rates compared with conventional polyethylene (CPE). However, crosslinking, thermal treatment and oxidation can decrease the mechanical properties of PE, and several cases of fracture of remelted HXPE liners were reported. We present, for the first time, unexpected failures of THA with the use of annealed HXPE liners in two patients occurring at 7 and 8 years after operation. Operative findings revealed dislocated liners from the metal shell and a fracture of the superior rim at the rim-dome junction in both liners. Scanning electron microscopy showed that the cracks initiated at the rim and propagated toward the articular surface. Both liners showed generally a low amount of oxidation (less than 1.00) at the articular surface and low wear rates; however, oxidation at the rim was relatively higher (mean 1.55). These findings suggested that decreased mechanical properties at the rim-dome junction due to cross-linking, annealing and oxidation might have been caused breakage of the HXPE liners after a long implantation time, although the annealed HXPE achieved low degree of wear.

High prevalence of acetabular retroversion in both affected and unaffected hips after Legg-Calvé-Perthes disease

BackgroundAcetabular retroversion is observed in hips after various pediatric hip diseases. This study sought to examine the frequency of acetabular retroversion in both affected and unaffected hips after Legg-Calvé-Perthes disease and its correlation with the prominence of the ischial spine.MethodsWe retrospectively investigated the version and morphological features of the acetabulum using pelvic radiographs after Legg-Calvé-Perthes disease (107 affected hips treated non-operatively and 72 unaffected hips from the contralateral side). The diagnosis of acetabular retroversion was made based on the presence of a positive cross-over sign on anteroposterior pelvic radiographs. The correlation between the presence of a positive cross-over sign and modified Stulberg classes, the onset age of Legg-Calvé-Perthes disease, radiographic parameters for acetabular dysplasia and the prominence of the ischial spine were examined.ResultsThe prevalence of a positive cross-over sign was 49.5 % (45 of 91 hips) in affected hips and 45.8 % (33 of 72 hips) in unaffected hips. Hips with a positive cross-over sign were significantly coexistent bilaterally. The prevalence of prominence of the ischial spine in the positive cross-over sign group was 71.4 % in the affected side and 81.8 % in the unaffected side, indicating a significant correlation between the cross-over sign and the prominence of the ischial spine in both affected and unaffected hips. The positive cross-over sign did not have any correlation with the parameters for acetabular dysplasia and the onset age, however, had a significant correlation with the severity of the femoral head deformity.ConclusionsHigh prevalence of acetabular retroversion in both affected and unaffected hips after Legg-Calvé-Perthes disease was demonstrated. Symmetric acetabular deformity and the coexistence of prominence of the ischial spine suggested the effects of the Legg-Calvé-Perthes disease lesions on the skeletal development of the whole pelvis. Further follow-up is needed to clarify the pathological significance of acetabular retroversion after Legg-Calvé-Perthes disease.

Does Native Combined Anteversion Influence Pain Onset in Patients With Dysplastic Hips

BackgroundCombined anteversion is the sum of femoral and acetabular anteversion and represents their morphological relationship in the axial plane. Few studies have investigated the native combined anteversion in patients with symptomatic dysplastic hips.Questions/purposesWe hypothesized the following: (1) dysplastic hips have two distinct populations, which differ from each other and from normal hips in their combined anteversion; and (2) these populations differ clinically in terms of correlation between age of onset of symptoms and amount of anteversion.MethodsWe measured radiographic parameters by CT of 100 dysplastic hips in 76 patients who were symptomatic enough to undergo periacetabular osteotomy and of 50 normal hips in 44 patients who had CT scans as part of preparation for computer-navigated TKAs; these patients had no visible hip arthritis or dysplasia and no hip symptoms. Dysplastic hips were divided into the anteversion (83 hips) and retroversion groups (17 hips) based on acetabular version. Age at pain onset was determined from their medical charts.ResultsCombined anteversion in the anteversion group was greater than that in the retroversion and control groups: 47° ± 12°, 30° ± 16°, and 36° ± 9°, respectively. In the anteversion group, combined anteversion (r = −0.49; 95% confidence interval [CI], −0.66 to −0.27; p < 0.001) and femoral anteversion (r = −0.41; 95% CI, −0.60 to −0.19; p < 0.001) were associated with an earlier age at pain onset; however, no such relationships were observed in the retroversion group. After controlling for relevant potential confounding variables, we found that combined anteversion (hazard ratio [HR], 1.04; 95% CI, 1.01–1.07; p = 0.006) and Sharp angle (HR, 1.10; 95% CI, 1.02–1.17; p = 0.008) were associated with an earlier age of pain onset in the anteversion group.ConclusionsThese results suggest that not only lateral coverage of the femoral head, but also axial joint morphology is important for the development of pain in the anteversion group. Optimal combined anteversion should be considered during periacetabular osteotomy.Level of EvidenceLevel IV, prognostic study.

Comparison of polyethylene wear between highly crosslinked and annealed UHMWPE and conventional UHMWPE against ceramic heads in total hip arthroplasty

The purpose of this study was to examine the effects of ceramic femoral head material on the wear of annealed, crosslinked ultra-high molecular weight polyethylene (UHMWPE) (XLPE) in total hip arthroplasty compared to non-crosslinked conventional UHMWPE (CPE). XLPE was fabricated by crosslinking with 60 kGy irradiation and annealing. Femoral heads made from zirconia and alumina ceramics, and cobalt-chrome (CoCr) of 22 mm or 26 mm diameter were used. In this study, the femoral head penetration into the cup was measured digitally on radiographs of 70 hips with XLPE and 50 hips with CPE. The average follow-up periods were 6.1 and 12.7 years, respectively. The steady wear rate of XLPE was significantly lower than those of CPE (0.002 versus 0.08 mm/year, respectively). Zirconia displayed increased wear rates compared to alumina in CPE; however, there was no difference among head materials in XLPE (0.0028, 0.011 and 0.009 mm/year for zirconia, alumina and CoCr, respectively). Neither head size or implantation period impacted XLPE wear. In contrast to CPE, XLPE displayed low wear rates surpassing the effects of varying femoral head material, size, implantation period and patient demographics.

Minimum 10-Year Clinical Outcomes After Periacetabular Osteotomy for Advanced Osteoarthritis Due to Hip Dysplasia

The purpose of this study was to examine the minimum 10-year clinical outcomes, including patient-reported and functional outcomes, of periacetabular osteotomy in patients with advanced osteoarthritis. A total of 46 hips in 44 patients with advanced osteoarthritis who underwent periacetabular osteotomy between 1992 and 2006 were retrospectively reviewed. Mean age at surgery was 47.5 years, and mean follow-up was 16.9±4.7 years. Survivorship was determined using the Kaplan-Meier method, and the associated risk factors for the endpoint-conversion to total hip arthroplasty less than 15 years after surgery-were evaluated. The Oxford Hip Score and the University of California, Los Angeles activity score were evaluated at final follow-up. The survival rates at 15 and 20 years after surgery were 80% and 59%, respectively. Multivariate analysis indicated that body mass index greater than 24 kg/m2 (P=.034; odds ratio, 1.72) was significantly associated with the endpoint as an independent risk factor. For 32 hips of 31 patients with preserved native joints at final follow-up, the Oxford Hip Score and the University of California, Los Angeles score averaged 41±5 and 5.2±1.8, respectively, equivalent (P=.28 and P=.215, respectively) to the scores of 14 hips of 13 patients with conversion to total hip arthroplasty (38±8.7 and 5.8±1.4, respectively). The results of this mid-term study may be useful for surgical decision-making among patients with advanced osteoarthritis who want to preserve native hip joints. [Orthopedics. 2018; 41(5):300-305.].