Misha Sumetsky

The microfiber loop resonator: theory, experiment, and application

This paper describes the theory of a microfiber loop resonator (MLR) and experimentally demonstrates a high quality factor MLR in free space. The MLR is fabricated from the /spl sim/1-/spl mu/m diameter waist of a biconical fiber taper using the CO/sub 2/ laser indirect heating technique. The high coupling efficiency of an MLR is achieved through an adiabatically slow variation of the microfiber diameter in the coupling region. An MLR-loaded Q-factor of 120 000 and an intrinsic Q-factor of 630 000 were demonstrated. As an application, the performance of an MLR as an ultrafast direct contact temperature sensor is also demonstrated. The MLR heating/cooling relaxation time was measured to be /spl sim/3 /spl mu/s, in good agreement with the developed theory.

Optical microbubble resonator

We develop a method for fabricating very small silica microbubbles having a micrometer-order wall thickness and demonstrate the first optical microbubble resonator. Our method is based on blowing a microbubble using stable radiative CO(2) laser heating rather than unstable convective heating in a flame or furnace. Microbubbles are created along a microcapillary and are naturally opened to the input and output microfluidic or gas channels. The demonstrated microbubble resonator has 370 microm diameter, 2 microm wall thickness, and a Q factor exceeding 10(6).

Basic Elements for Microfiber Photonics: Micro/Nanofibers and Microfiber Coil Resonators

The basic functional element of microfiber photonics is a microfiber coil resonator (MCR), which potentially can perform filtering, time delay, and nonlinear transformations of electromagnetic waves, as well as sensing of the ambient medium. The first experimental demonstration of an MCR has been recently performed by researchers of the OFS Laboratories (Optical Fiber Communication Conference 2007, Postdeadline paper PDP46). This paper follows up on the later publication presenting a brief introduction to the theory, transmission properties and applications of optical micro/nanofibers and MCRs. Fabrication of MCRs in air and in liquid is reported. For the MCR immersed in liquid, the Q-factor exceeding 60 000 is achieved.

Super free spectral range tunable optical microbubble resonator

An optical resonator is often called fully tunable if its tunable range exceeds the spectral interval that contains the resonances at all the characteristic modes of this resonator. For high-Q-factor spheroidal and toroidal microresonators, this interval coincides with the azimuthal free spectral range (FSR). In this Letter, we demonstrate what we believe to be the first mechanically fully tunable spheroidal microresonator created of a silica microbubble having a 100microm order radius and 1microm order wall thickness. The tunable bandwidth of this resonator is more than two times greater than its azimuthal FSR.

Surface nanoscale axial photonics:robust fabrication of high-quality-factor microresonators

Recently introduced surface nanoscale axial photonics (SNAP) makes it possible to fabricate high-Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical and robust technology, the SNAP platform requires methods enabling reproducible modification of the optical fiber radius at nanoscale. In this Letter, we demonstrate superaccurate fabrication of high-Q-factor microresonators by nanoscale modification of the optical fiber radius and refractive index using CO2 laser and UV excimer laser beam exposures. The achieved fabrication accuracy is better than 2 Å in variation of the effective fiber radius.

Delay of light in an optical bottle resonator with nanoscale radius variation:dispersionless, broadband, and low-loss

It is shown theoretically that an optical bottle resonator with a nanoscale radius variation can perform a multinanosecond long dispersionless delay of light in a nanometer-order bandwidth with minimal losses. Experimentally, a 3 mm long resonator with a 2.8 nm deep semiparabolic radius variation is fabricated from a 19 μm radius silica fiber with a subangstrom precision. In excellent agreement with theory, the resonator exhibits the impedance-matched 2.58 ns (3 bytes) delay of 100 ps pulses with 0.44 dB/ns intrinsic loss. This is a miniature slow light delay line with the record large delay time, record small transmission loss, dispersion, and effective speed of light.

Surface nanoscale axial photonics

Dense photonic integration promises to revolutionize optical computing and communications. However, efforts towards this goal face unacceptable attenuation of light caused by surface roughness in microscopic devices. Here we address this problem by introducing Surface Nanoscale Axial Photonics (SNAP). The SNAP platform is based on whispering gallery modes circulating around the optical fiber surface and undergoing slow axial propagation readily described by the one-dimensional Schrödinger equation. These modes can be steered with dramatically small nanoscale variation of the fiber radius, which is quite simple to introduce in practice. Extremely low loss of SNAP devices is achieved due to the low surface roughness inherent in a drawn fiber surface. In excellent agreement with the developed theory, we experimentally demonstrate localization of light in quantum wells, halting light by a point source, tunneling through potential barriers, dark states, etc. This demonstration has intriguing potential applications in filtering, switching, slowing light, and sensing.

Fiber coupling to BaTiO 3 glass microspheres in an aqueous environment

Compact microspheres with high-quality (Q) whispering gallery modes are required for many applications involving liquid immersion, such as sensing nanoparticles and studying resonant radiative pressure effects. We show that high-index (1.9 and 2.1) barium titanate glass (BTG) microspheres are perfect candidates for these applications due to their high-Q (∼10(4) in the 1100-1600 nm range) resonances evanescently excited in spheres with diameters of 4-15 μm. By reattaching the spheres at different positions along a tapered optical fiber, we show that the coupling constant exponentially increases with thinner fiber diameters. We demonstrate the close to critical coupling regime with intrinsic Q=3×10(4) for water immersed 14 μm BTG spheres.

Nanophotonics of optical fibers

Abstract This review is concerned with nanoscale effects in highly transparent dielectric photonic structures fabricated from optical fibers. In contrast to those in plasmonics, these structures do not contain metal particles, wires, or films with nanoscale dimensions. Nevertheless, a nanoscale perturbation of the fiber radius can significantly alter their performance. This paper consists of three parts. The first part considers propagation of light in thin optical fibers (microfibers) having the radius of the order of 100 nanometers to 1 micron. The fundamental mode propagating along a microfiber has an evanescent field which may be strongly expanded into the external area. Then, the cross-sectional dimensions of the mode and transmission losses are very sensitive to small variations of the microfiber radius. Under certain conditions, a change of just a few nanometers in the microfiber radius can significantly affect its transmission characteristics and, in particular, lead to the transition from the waveguiding to non-waveguiding regime. The second part of the review considers slow propagation of whispering gallery modes in fibers having the radius of the order of 10–100 microns. The propagation of these modes along the fiber axis is so slow that they can be governed by extremely small nanoscale changes of the optical fiber radius. This phenomenon is exploited in SNAP (surface nanoscale axial photonics), a new platform for fabrication of miniature super-low-loss photonic integrated circuits with unprecedented sub-angstrom precision. The SNAP theory and applications are overviewed. The third part of this review describes methods of characterization of the radius variation of microfibers and regular optical fibers with sub-nanometer precision.

Kerr nonlinear switching in a hybrid silica-silicon microspherical resonator.

A hybrid silicon-core, silica-clad microspherical resonator has been fabricated from the semiconductor core fiber platform. Linear and nonlinear characterization of the resonator properties have shown it to exhibit advantageous properties associated with both materials, with the low loss cladding supporting high quality (Q) factor whispering gallery modes which can be tuned through the nonlinear response of the crystalline core. By exploiting the large wavelength shift associated with the Kerr nonlinearity, we have demonstrated all-optical modulation of a weak probe on the timescale of the femtosecond pump pulse. This novel geometry offers a route to ultra-low loss, high-Q silica-based resonators with enhanced functionality.