Mishtu Dey

Structural basis of regiospecificity of a mononuclear iron enzyme in antibiotic fosfomycin biosynthesis.

Hydroxypropylphosphonic acid epoxidase (HppE) is an unusual mononuclear iron enzyme that uses dioxygen to catalyze the oxidative epoxidation of (S)-2-hydroxypropylphosphonic acid (S-HPP) in the biosynthesis of the antibiotic fosfomycin. Additionally, the enzyme converts the R-enantiomer of the substrate (R-HPP) to 2-oxo-propylphosphonic acid. To probe the mechanism of HppE regiospecificity, we determined three X-ray structures: R-HPP with inert cobalt-containing enzyme (Co(II)–HppE) at 2.1 Å resolution; R-HPP with active iron-containing enzyme (Fe(II)–HppE) at 3.0 Å resolution; and S-HPP–Fe(II)–HppE in complex with dioxygen mimic NO at 2.9 Å resolution. These structures, along with previously determined structures of S-HPP–HppE, identify the dioxygen binding site on iron and elegantly illustrate how HppE is able to recognize both substrate enantiomers to catalyze two completely distinct reactions.

Detection of Organometallic and Radical Intermediates in the Catalytic Mechanism of Methyl-Coenzyme M Reductase Using the Natural Substrate Methyl-Coenzyme M and a Coenzyme B Substrate Analogue

Methyl-coenzyme M reductase (MCR) from methanogenic archaea catalyzes the terminal step in methanogenesis using coenzyme B (CoBSH) as the two-electron donor to reduce methyl-coenzyme M (methyl-SCoM) to form methane and the heterodisulfide, CoBS-SCoM. The active site of MCR contains an essential redox-active nickel tetrapyrrole cofactor, coenzyme F(430), which is active in the Ni(I) state (MCR(red1)). Several catalytic mechanisms have been proposed for methane synthesis that mainly differ in whether an organometallic methyl-Ni(III) or a methyl radical is the first catalytic intermediate. A mechanism was recently proposed in which methyl-Ni(III) undergoes homolysis to generate a methyl radical (Li, X., Telser, J., Kunz, R. C., Hoffman, B. M., Gerfen, G., and Ragsdale, S. W. (2010) Biochemistry 49, 6866-6876). Discrimination among these mechanisms requires identification of the proposed intermediates, none of which have been observed with native substrates. Apparently, intermediates form and decay too rapidly to accumulate to detectible amounts during the reaction between methyl-SCoM and CoBSH. Here, we describe the reaction of methyl-SCoM with a substrate analogue (CoB(6)SH) in which the seven-carbon heptanoyl moiety of CoBSH has been replaced with a hexanoyl group. When MCR(red1) is reacted with methyl-SCoM and CoB(6)SH, methanogenesis occurs 1000-fold more slowly than with CoBSH. By transient kinetic methods, we observe decay of the active Ni(I) state coupled to formation and subsequent decay of alkyl-Ni(III) and organic radical intermediates at catalytically competent rates. The kinetic data also revealed substrate-triggered conformational changes in active Ni(I)-MCR(red1). Electron paramagnetic resonance (EPR) studies coupled with isotope labeling experiments demonstrate that the radical intermediate is not tyrosine-based. These observations provide support for a mechanism for MCR that involves methyl-Ni(III) and an organic radical as catalytic intermediates. Thus, the present study provides important mechanistic insights into the mechanism of this key enzyme that is central to biological methane formation.

Geometric and Electronic Structures of the NiI and Methyl-NiIII Intermediates of Methyl-Coenzyme M Reductase

Methyl-coenzyme M reductase (MCR) catalyzes the terminal step in the formation of biological methane from methyl-coenzyme M (Me-SCoM) and coenzyme B (CoBSH). The active site in MCR contains a Ni−F430 cofactor, which can exist in different oxidation states. The catalytic mechanism of methane formation has remained elusive despite intense spectroscopic and theoretical investigations. On the basis of spectroscopic and crystallographic data, the first step of the mechanism is proposed to involve a nucleophilic attack of the NiI active state (MCRred1) on Me-SCoM to form a NiIII−methyl intermediate, while computational studies indicate that the first step involves the attack of NiI on the sulfur of Me-SCoM, forming a CH3• radical and a NiII−thiolate species. In this study, a combination of Ni K-edge X-ray absorption spectroscopic (XAS) studies and density functional theory (DFT) calculations have been performed on the NiI (MCRred1), NiII (MCRred1−silent), and NiIII−methyl (MCRMe) states of MCR to elucidate the geometric and electronic structures of the different redox states. Ni K-edge EXAFS data are used to reveal a five-coordinate active site with an open upper axial coordination site in MCRred1. Ni K-pre-edge and EXAFS data and time-dependent DFT calculations unambiguously demonstrate the presence of a long Ni−C bond (∼2.04 Å) in the NiIII−methyl state of MCR. The formation and stability of this species support mechanism I, and the Ni−C bond length suggests a homolytic cleavage of the NiIII−methyl bond in the subsequent catalytic step. The XAS data provide insight into the role of the unique F430 cofactor in tuning the stability of the different redox states of MCR.

Biochemical, Kinetic, and Spectroscopic Characterization of Ruegeria pomeroyi DddW--A Mononuclear Iron-Dependent DMSP Lyase.

The osmolyte dimethylsulfoniopropionate (DMSP) is a key nutrient in marine environments and its catabolism by bacteria through enzymes known as DMSP lyases generates dimethylsulfide (DMS), a gas of importance in climate regulation, the sulfur cycle, and signaling to higher organisms. Despite the environmental significance of DMSP lyases, little is known about how they function at the mechanistic level. In this study we biochemically characterize DddW, a DMSP lyase from the model roseobacter Ruegeria pomeroyi DSS-3. DddW is a 16.9 kDa enzyme that contains a C-terminal cupin domain and liberates acrylate, a proton, and DMS from the DMSP substrate. Our studies show that as-purified DddW is a metalloenzyme, like the DddQ and DddP DMSP lyases, but contains an iron cofactor. The metal cofactor is essential for DddW DMSP lyase activity since addition of the metal chelator EDTA abolishes its enzymatic activity, as do substitution mutations of key metal-binding residues in the cupin motif (His81, His83, Glu87, and His121). Measurements of metal binding affinity and catalytic activity indicate that Fe(II) is most likely the preferred catalytic metal ion with a nanomolar binding affinity. Stoichiometry studies suggest DddW requires one Fe(II) per monomer. Electronic absorption and electron paramagnetic resonance (EPR) studies show an interaction between NO and Fe(II)-DddW, with NO binding to the EPR silent Fe(II) site giving rise to an EPR active species (g = 4.29, 3.95, 2.00). The change in the rhombicity of the EPR signal is observed in the presence of DMSP, indicating that substrate binds to the iron site without displacing bound NO. This work provides insight into the mechanism of DMSP cleavage catalyzed by DddW.

Structural analysis of a Ni-methyl species in methyl-coenzyme M reductase from Methanothermobacter marburgensis.

We present the 1.2 Å resolution X-ray crystal structure of a Ni-methyl species that is a proposed catalytic intermediate in methyl-coenzyme M reductase (MCR), the enzyme that catalyzes the biological formation of methane. The methyl group is situated 2.1 Å proximal of the Ni atom of the MCR coenzyme F(430). A rearrangement of the substrate channel has been posited to bring together substrate species, but Ni(III)-methyl formation alone does not lead to any observable structural changes in the channel.

Structural insight into methyl-coenzyme M reductase chemistry using coenzyme B analogues.

Methyl-coenzyme M reductase (MCR) catalyzes the final and rate-limiting step in methane biogenesis: the reduction of methyl-coenzyme M (methyl-SCoM) by coenzyme B (CoBSH) to methane and a heterodisulfide (CoBS-SCoM). Crystallographic studies show that the active site is deeply buried within the enzyme and contains a highly reduced nickel-tetrapyrrole, coenzyme F(430). Methyl-SCoM must enter the active site prior to CoBSH, as species derived from methyl-SCoM are always observed bound to the F(430) nickel in the deepest part of the 30 A long substrate channel that leads from the protein surface to the active site. The seven-carbon mercaptoalkanoyl chain of CoBSH binds within a 16 A predominantly hydrophobic part of the channel close to F(430), with the CoBSH thiolate lying closest to the nickel at a distance of 8.8 A. It has previously been suggested that binding of CoBSH initiates catalysis by inducing a conformational change that moves methyl-SCoM closer to the nickel promoting cleavage of the C-S bond of methyl-SCoM. In order to better understand the structural role of CoBSH early in the MCR mechanism, we have determined crystal structures of MCR in complex with four different CoBSH analogues: pentanoyl, hexanoyl, octanoyl, and nonanoyl derivatives of CoBSH (CoB(5)SH, CoB(6)SH, CoB(8)SH, and CoB(9)SH, respectively). The data presented here reveal that the shorter CoB(5)SH mercaptoalkanoyl chain overlays with that of CoBSH but terminates two units short of the CoBSH thiolate position. In contrast, the mercaptoalkanoyl chain of CoB(6)SH adopts a different conformation, such that its thiolate is coincident with the position of the CoBSH thiolate. This is consistent with the observation that CoB(6)SH is a slow substrate. A labile water in the substrate channel was found to be a sensitive indicator for the presence of CoBSH and HSCoM. The longer CoB(8)SH and CoB(9)SH analogues can be accommodated in the active site through exclusion of this water. These analogues react with Ni(III)-methyl, a proposed MCR catalytic intermediate of methanogenesis. The CoB(8)SH thiolate is 2.6 A closer to the nickel than that of CoBSH, but the additional carbon of CoB(9)SH only decreases the nickel thiolate distance a further 0.3 A. Although the analogues do not induce any structural changes in the substrate channel, the thiolates appear to preferentially bind at two distinct positions in the channel, one being the previously observed CoBSH thiolate position and the other being at a hydrophobic annulus of residues that lines the channel proximal to the nickel.

Characterization of the thioether product formed from the thiolytic cleavage of the alkyl-nickel bond in methyl-coenzyme M reductase.

Methyl-coenzyme M reductase (MCR) catalyzes the terminal step in methanogenesis by using N-7-mercaptoheptanolyl-threonine phosphate (CoBSH) as the two-electron donor to reduce 2-(methylthiol)ethane sulfonate (methyl-SCoM) to methane, and producing the heterodisulfide, CoBS-SCoM. The active site of MCR includes a noncovalently bound Ni tetrapyrrolic cofactor called coenzyme F430, which is in the Ni(I) state in the active enzyme (MCRred1). Bromopropanesulfonate (BPS) is a potent inhibitor and reversible redox inactivator that reacts with MCRred1 to form an EPR-active state called MCRPS, which is an alkyl-nickel species. When MCRPS is treated with free thiol containing compounds, the enzyme is reconverted to the active MCRred1 state. In this paper, we demonstrate that the reactivation of MCRPS to MCRred1 by thiols involves formation of a thioether product. MCRPS also can be converted to active MCRred1 by treatment with sodium borohydride. Reactivation is highest with the smallest free thiol HS-. Interestingly, MCRPS can also be reductively activated with analogues of CoBSH such as CoB8SH and CoB9SH, but not CoBSH itself. Unambiguous demonstration of the formation of a methylthioether product from thiolysis of an alkyl-Ni species provides support for a methyl-Ni intermediate in the MCR-catalyzed last step in methanogenesis and the first proposed step in anaerobic methane oxidation.

Structural and Biochemical Insights into Dimethylsulfoniopropionate Cleavage by Cofactor-Bound DddK from the Prolific Marine Bacterium Pelagibacter

Enormous amounts of the organic osmolyte dimethylsulfoniopropionate (DMSP) are produced in marine environments where bacterial DMSP lyases cleave it, yielding acrylate and the climate-active gas dimethyl sulfide (DMS). SAR11 bacteria are the most abundant clade of heterotrophic bacteria in the oceans and play a key role in DMSP catabolism. An important environmental factor affecting DMS generation via DMSP lyases is the availability of metal ions because they are essential cofactors for many of these enzymes. Here we examine the structure and activity of DddK in the presence of various metal ions. We have established that DddK containing a double-stranded β-helical motif utilizes various divalent metal ions as cofactors for catalytic activity. However, nickel, an abundant metal ion in marine environments, adopts a distorted octahedral coordination environment and conferred the highest DMSP lyase activity. Crystal structures of cofactor-bound DddK reveal key metal ion binding and catalytic residues and provide the first rationalization for varying activities with different metal ions. The structures of DddK along with site-directed mutagenesis and ultraviolet-visible studies are consistent with Tyr 64 acting as a base to initiate the β-elimination reaction of DMSP. Our biochemical and structural studies provide a detailed understanding of DMS generation by one of the oceans most prolific bacteria.

Bacillus anthracis Prolyl 4-Hydroxylase Modifies Collagen-like Substrates in Asymmetric Patterns

Proline hydroxylation is the most prevalent post-translational modification in collagen. The resulting product trans-4-hydroxyproline (Hyp) is of critical importance for the stability and thus function of collagen, with defects leading to several diseases. Prolyl 4-hydroxylases (P4Hs) are mononuclear non-heme iron α-ketoglutarate (αKG)-dependent dioxygenases that catalyze Hyp formation. Although animal and plant P4Hs target peptidyl proline, prokaryotes have been known to use free l-proline as a precursor to form Hyp. The P4H from Bacillus anthracis (BaP4H) has been postulated to act on peptidyl proline in collagen peptides, making it unusual within the bacterial clade, but its true physiological substrate remains enigmatic. Here we use mass spectrometry, fluorescence binding, x-ray crystallography, and docking experiments to confirm that BaP4H recognizes and acts on peptidyl substrates but not free l-proline, using elements characteristic of an Fe(II)/αKG-dependent dioxygenases. We further show that BaP4H can hydroxylate unique peptidyl proline sites in collagen-derived peptides with asymmetric hydroxylation patterns. The cofactor-bound crystal structures of BaP4H reveal active site conformational changes that define open and closed forms and mimic “ready” and “product-released” states of the enzyme in the catalytic cycle. These results help to clarify the role of BaP4H as well as provide broader insights into human collagen P4H and proteins with poly-l-proline type II helices.

Structural analysis of cofactor binding for a prolyl 4-hydroxylase from the pathogenic bacterium Bacillus anthracis.

The prolyl 4-hydroxylases (P4Hs) are mononuclear nonheme iron enzymes that catalyze the formation of 4R-hydroxyproline from many different substrates, with various biological implications. P4H is a key player in collagen accumulation, which has implications in fibrotic disorders. The stabilization of collagen triple-helical structure via prolyl hydroxylation is the rate-limiting step in collagen biosynthesis, and therefore P4H has been extensively investigated as a potential therapeutic target of fibrotic disease. Understanding how these enzymes recognize cofactors and substrates is important and will aid in the future design of inhibitors of P4H. In this article, X-ray crystal structures of a metallocofactor- and α-ketoglutarate (αKG)-bound form of P4H from Bacillus anthracis (BaP4H) are reported. Structures of BaP4H were solved at 1.63 and 2.35 Å resolution and contained a cadmium ion and αKG bound in the active site. The αKG-Cd-BaP4H ternary complex reveals conformational changes of conserved residues upon the binding of metal ion and αKG, resulting in a closed active-site configuration required for dioxygen, substrate binding and catalysis.