Mohamed A. Ettabib

FWM-based wavelength conversion of 40 Gbaud PSK signals in a silicon germanium waveguide

We demonstrate four wave mixing (FWM) based wavelength conversion of 40 Gbaud differential phase shift keyed (DPSK) and quadrature phase shift keyed (QPSK) signals in a 2.5 cm long silicon germanium waveguide. For a 290 mW pump power, bit error ratio (BER) measurements show approximately a 2-dB power penalty in both cases of DPSK (measured at a BER of 10(-9)) and QPSK (at a BER of 10(-3)) signals that we examined.

Optical properties of silicon germanium waveguides at telecommunication wavelengths

We present a systematic experimental study of the linear and nonlinear optical properties of silicon-germanium (SiGe) waveguides, conducted on samples of varying cross-sectional dimensions and Ge concentrations. The evolution of the various optical properties for waveguide widths in the range 0.3 to 2 µm and Ge concentrations varying between 10 and 30% is considered. Finally, we comment on the comparative performance of the waveguides, when they are considered for nonlinear applications at telecommunications wavelengths.

Mid-infrared supercontinuum generation in suspended core tellurite microstructured optical fibers

We report the fabrication of a tellurite optical fiber with a suspended core design, formed on a 220-nm-wide filament of glass. The fiber was pumped at two different wavelengths (1500 and 2400 nm) using femtosecond pulses generated from an optical parametric oscillator (OPO) in order to produce mid-infrared supercontinuum (SC). We observed that SC spectra extending to 3 μm were readily generated. To further optimize the design, detailed numerical study was performed, which revealed how the fiber structural characteristics dramatically influence the spectral broadening because of the changes in the dispersion profile and in turn, the interplay of nonlinear effects that give rise to SC generation. We found that an accurate control of the core shape can be employed to contain the generated SC spectra within well-defined spectral regions or to provide a broad extension of the continuum to beyond 4 μm.

Broadband telecom to mid-infrared supercontinuum generation in a dispersion-engineered silicon germanium waveguide.

We demonstrate broadband supercontinuum generation (SCG) in a dispersion-engineered silicon-germanium waveguide. The 3 cm long waveguide is pumped by femtosecond pulses at 2.4 μm, and the generated supercontinuum extends from 1.45 to 2.79 μm (at the -30  dB point). The broadening is mainly driven by the generation of a dispersive wave in the 1.5-1.8 μm region and soliton fission. The SCG was modeled numerically, and excellent agreement with the experimental results was obtained.

Towards nonlinear conversion from mid- to near-infrared wavelengths using Silicon Germanium waveguides

We demonstrate the design, fabrication and characterization of a highly nonlinear graded-index SiGe waveguide for the conversion of mid-infrared signals to the near-infrared. Using phase-matched four-wave mixing, we report the conversion of a signal at 2.65 µm to 1.77 µm using a pump at 2.12 µm.

Phase sensitive amplification in a highly nonlinear lead-silicate fibre

We experimentally demonstrate phase-sensitive amplification in a highly nonlinear lead-silicate W-type fibre. A phase-sensitive gain swing of 6dB was observed in a 1.56m sample of the fibre for a total launched power of 33dBm.

All-optical phase regeneration with record PSA extinction ratio in a low-birefringence silicon germanium waveguide

We report a low-power continuous wave-pumped phase sensitive amplifier (PSA)-based phase regenerator implemented in a passive silicon-based waveguide. A polarization assisted-PSA, consisting of two orthogonally-polarized pumps and a phase-locked signal copolarized to one of them, was implemented in a low-birefringence silicon germanium (SiGe) waveguide. The strong TE/TM modal symmetry of the waveguide and its large nonlinear coefficient enabled the achievement of an extremely large phase sensitive extinction ratio of approximately 29 dB for a total input power of only 21.3 dBm. This SiGe-based PSA was used to demonstrate phase regeneration on a 20 Gb/s differential phase-shift keying signal, thereby reducing its error vector magnitude and phase error by three and six times respectively and enabling a bit-error ratio improvement of up to 2 dB.

Phase regeneration of DPSK signals in a highly nonlinear lead-silicate W-type fiber

We experimentally demonstrate phase regeneration of a 40-Gb/s differential phase shift keying (DPSK) signal in a 1.7-m long highly nonlinear lead silicate W-type fiber using a degenerate two-pump phase-sensitive amplifier (PSA). Results show an improvement in the Error Vector Magnitude (EVM) and a reduction of almost a factor of 2 in the phase noise of the signal after regeneration for various noise levels at the input.

Augmenting forearm crutches with wireless sensors for lower limb rehabilitation

Forearm crutches are frequently used in the rehabilitation of an injury to the lower limb. The recovery rate is improved if the patient correctly applies a certain fraction of their body weight (specified by a clinician) through the axis of the crutch, referred to as partial weight bearing (PWB). Incorrect weight bearing has been shown to result in an extended recovery period or even cause further damage to the limb. There is currently no minimally invasive tool for long-term monitoring of a patients PWB in a home environment. This paper describes the research and development of an instrumented forearm crutch that has been developed to wirelessly and autonomously monitor a patients weight bearing over the full period of their recovery, including its potential use in a home environment. A pair of standard forearm crutches are augmented with low-cost off-the-shelf wireless sensor nodes and electronic components to provide indicative measurements of the applied weight, crutch tilt and hand position on the grip. Data are wirelessly transmitted between crutches and to a remote computer (where they are processed and visualized in LabVIEW), and the patient receives biofeedback by means of an audible signal when they put too much or too little weight through the crutch. The initial results obtained highlight the capability of the instrumented crutch to support physiotherapists and patients in monitoring usage.

Ultra-Compact Amorphous Silicon Waveguide for Wavelength Conversion

In this letter, we demonstrate, for the first time, successful four wave mixing (FWM)-based wavelength conversion of binary phase shift keyed (BPSK) and quadrature phase shift keyed (QPSK) signals, at 20-Gb/s bitrate, in a 1-mm long amorphous silicon waveguide. A maximum FWM-efficiency of -26 dB was achieved by employing a pump power of just 70 mW, establishing this technology as a contender for the development of ultra-compact, low power, silicon photonics wavelength converter. Bit error ratio measurements demonstrated successful conversion with less than 1 dB penalty level, for both BPSK and QPSK signals (at BER = 10-5).