Mohammad Zuber

Chitosan functionalized poly(vinyl alcohol) for prospects biomedical and industrial applications: A review.

Chitin and chitosan are amino polysaccharides having multidimensional properties, such as biocompatibility, biodegradability, antibacterial properties and non-toxicity, muco-adhesivity, adsorption properties, etc., and thus they can be widely used in variety of areas. Although human history mainly relies on the biopolymers, however synthetic materials like polyvinyl alcohol (PVA) have good mechanical, chemical and physical properties. Functionalization of PVA with chitin and chitosan is considered very appropriate for the development of well-designed biomaterials such as biodegradable films, for membrane separation, for tissue engineering, for food packaging, for wound healing and dressing, hydro gels formation, gels formation, etc. Considering versatile properties of the chitin and chitosan, and wide industrial and biomedical applications of PVA, this review sheds a light on chitin and chitosan based PVA materials with their potential applications especially focusing the bio-medical field. All the technical scientific issues have been addressed highlighting the recent advancement.

Recent developments and future prospects on bio-based polyesters derived from renewable resources: a review.

A significantly growing interest is to design a new strategy for development of bio-polyesters from renewable resources due to limited fossil fuel reserves, rise of petrochemicals price and emission of green house gasses. Therefore, this review aims to present an overview on synthesis of biocompatible, biodegradable and cost effective polyesters from biomass and their prospective in different fields including packaging, coating, tissue engineering, drug delivery system and many more. Isosorbide, 2,4:3,5-di-O-methylene-d-mannitol, bicyclic diacetalyzed galactaric acid, 2,5-furandicarboxylic acid, citric, 2,3-O-methylene l-threitol, dimethyl 2,3-O-methylene l-threarate, betulin, dihydrocarvone, decalactone, pimaric acid, ricinoleic acid and sebacic acid, are some important monomers derived from biomass which are used for bio-based polyester manufacturing, consequently, replacing the petrochemical based polyesters. The last part of this review highlights some recent advances in polyester blends and composites in order to improve their properties for exceptional biomedical applications i.e. skin tissue engineering, guided bone regeneration, bone healing process, wound healing and wound acceleration.

Alginate based polyurethanes: A review of recent advances and perspective

The trend of using biopolymers in combination with synthetic polymers was increasing rapidly from last two or three decades. Polysaccharide based biopolymers especially starch, cellulose, chitin, chitosan, alginate, etc. found extensive applications for different industrial uses, as they are biocompatible, biodegradable, bio-renewable resources and chiefly environment friendly. Segment block copolymer character of polyurethanes that endows them a broad range of versatility in terms of tailoring their properties was employed in conjunction with various natural polymers resulted in modified biomaterials. Alginate is biodegradable, biocompatible, bioactive, less toxic and low cost anionic polysaccharide, as a part of structural component of bacteria and brown algae (sea weed) is quite abundant in nature. It is used in combination with polyurethanes to form elastomers, nano-composites, hydrogels, etc. that especially revolutionized the food and biomedical industries. The review summarized the development in alginate based polyurethanes with their potential applications.

Chitin and chitosan based polyurethanes: A review of recent advances and prospective biomedical applications

Chitin and chitosan are amino polysaccharides having massive structural propensities to produce bioactive materials with innovative properties, functions and diverse applications particularly in biomedical field. The specific physico-chemical, mechanical, biological and degradation properties offer efficient way to blend these biopolymers with synthetic ones. Polyurethane (PU) gained substantial attention owing to its structure-properties relationship. The immense activities of chitin/chitosan are successfully utilized to enhance the bioactive properties of polyurethanes. This review shed a light on chitin and chitosan based PU materials with their potential applications especially focusing the bio-medical field. All the technical scientific issues have been addressed highlighting the recent advancement in the biomedical field.

Recent developments in curcumin and curcumin based polymeric materials for biomedical applications: A review.

Turmeric (Curcuma longa) is a popular Indian spice that has been used for centuries in herbal medicines for the treatment of a variety of ailments such as rheumatism, diabetic ulcers, anorexia, cough and sinusitis. Curcumin (diferuloylmethane) is the main curcuminoid present in turmeric and responsible for its yellow color. Curcumin has been shown to possess significant anti-inflammatory, anti-oxidant, anti-carcinogenic, anti-mutagenic, anticoagulant and anti-infective effects. This review summarizes and discusses recently published papers on the key biomedical applications of curcumin based materials. The highlighted studies in the review provide evidence of the ability of curcumin to show the significant vitro antioxidant, diabetic complication, antimicrobial, neuroprotective, anti-cancer activities and detection of hypochlorous acid, wound healing, treatment of major depression, healing of paracentesis, and treatment of carcinoma and optical detection of pyrrole properties. Hydrophobic nature of this polyphenolic compound along with its rapid metabolism, physicochemical and biological instability contribute to its poor bioavailability. To redress these problems several approaches have been proposed like encapsulation of curcumin in liposomes and polymeric micelles, inclusion complex formation with cyclodextrin, formation of polymer-curcumin conjugates, etc.

Eco-Friendly Dyeing of Gamma Ray Induced Cotton Using Natural Quercetin Extracted from Acacia Bark (A. nilotica)

For the present study Quercetin has been extracted and applied onto the gamma irradiated cotton. Fabrics and powder have been exposed to different absorbed doses and dyeing has been performed at various parameters. It is observed that 20 kGy is the optimum absorbed dose for surface modification of cotton. It has been also found that good colour strength has been obtained at 60°C by dyeing optimal fabric for 40 min using dye bath of pH6 keeping liquor concentration of 1:30 and electrolyte concentration of 1 g. 7% of tannic acid as pre-mordant and 5% of Copper sulphate as post mordant was optimum conditions to get good fastness properties according to ISO standard methods. Quercetin from acacia bark under ionizing radiation can safely be used as possible substitute to reddish-brown synthetic dyes.

Starch based polyurethanes: A critical review updating recent literature.

Recent advancements in material science and technology made it obvious that use of renewable feed stock is the need of hour. Polymer industry steadily moved to get rid of its dependence on non-renewable resources. Starch, the second largest occurring biomass (renewable) on this planet provides a cheap and eco-friendly way to form huge variety of materials on blending with other biodegradable polymers. Specific structural versatility design for individual application and tailor-made properties have established the polyurethane (PU) as an important and popular class of synthetic biodegradable polymers. Blending of starch with polyurethane is relatively a developing area in PU chemistry but with lot of attraction for researchers. Herein, various starch based polyurethane materials including blends, grafts, copolymers, composites and nano-composites, as well as the prospects and latest developments are discussed. Additionally, an overview of starch based polymeric materials, including their potential applications are presented.

Lignin-derivatives based polymers, blends and composites: A review.

Lignin and lignin derivatives biopolymers have several properties, such as high thermal stability, antioxidant, biodegradability, antimicrobial actions, adhesive properties, etc., and thus they can be extensively used in wide range of areas. Although human history mostly depend on the biopolymers, however derivatives of lignin such as sulfonate, phenolic, organosolv, Kraft and sodium sulfonate lignin have good mechanical and physicochemical properties. Well-designed materials such as coatings and paints, manufacturing of plastics and resins, for rubber packaging, for fuel production etc., can be obtained by the functionalizations of chemically modified lignin. Considering multi purposes properties of the lignin and lignin derivatives and extensive industrial applications of derivatives, this review sheds a light on lignin derivatives based materials with their prospective applications. All the technical scientific issues have been addressed highlighting the recent advancement.

Graft polymerization of guar gum with acryl amide irradiated by microwaves for colonic drug delivery.

This article is aimed to discuss the modification of guar gum through microwave irradiation by varying the time of irradiation. The characterization of the modified products was carried out using FTIR spectroscopic analysis. The FT-IR spectrum of the pure guar gum (GG) sample showed a broad peak at 3298 cm(-1) while the modified GG sample displayed a peak at 1541 cm(-1) which was absent in the crude sample. The X-ray diffraction (XRD) analysis confirmed the increase in crystallinity due to grafting of the sample with polyacrylamide (GG-g-PAM). Scanning electron microscope (SEM) images revealed that granular form of guar gum was changed into fibrillar structure after grafting. Thermo-gravimetric analysis of the modified samples was also carried out and discussed. The role of guar gum as a matrix for controlled release of drug triamcinolone was evaluated. The GG-acrylamide grafted samples presented a correlation between drug release and time of microwave exposure. The results revealed that such modified product has potential applications in colonic drug delivery system.

Synthesis and molecular characterization of chitosan based polyurethane elastomers using aromatic diisocyanate

The present research work was performed to synthesize a new series of chitosan based polyurethane elastomers (PUEs) using poly(ɛ-caprolactone) (PCL). The chitosan based PUEs were prepared by step-growth polymerization technique using poly(ɛ-caprolactone) (PCL) and 2,4-toluene diisocyanate (TDI). In the second step the PU prepolymer was extended with different mole ratios of chitosan and 1,4-butane diol (BDO). Molecular engineering was carried out during the synthesis. The conventional spectroscopic characterization of the synthesized samples using FT-IR confirms the existence of the proposed chitosan based PUEs structure. Internal morphology of the prepared PUEs was studied using SEM analysis. The SEM images confirmed the incorporation of chitosan molecules into the PU backbone.