Mohammed ElKaoutit

Electrochemical behaviour of epinephrine and uric acid at a Sonogel―Carbon L-Cysteine modified electrode

The Sonogel-Carbon electrode is a special class of sol-gel electrode that exhibits favourable mechanic and electric properties to be used as electrochemical sensor. In this study, Sonogel-Carbon modified with L-Cysteine was used to prepare a novel electrochemical sensor. The objective of this novel electrode modification was to seek new electrochemical performances for detection of epinephrine in the presence of uric acid. The response of catalytic current with epinephrine concentration shows a linear relation in the range from 1 x 10(-7) to 5 x 10(-4)M with a correlation coefficient of 0.998, and a detection limit of 8.7 x 10(-8)M. The modified electrode had also been applied to the determination of epinephrine and uric acid in biological samples with satisfactory results. A surface characterisation of this modified electrode was carried out helped by scanning electron microscopy (SEM) and X-Ray energy dispersive spectroscopy (EDS).

Use of a Sonogel-Carbon electrode modified with bentonite for the determination of diazepam and chlordiazepoxide hydrochloride in tablets and their metabolite oxazepam in urine

Sonogel-Carbon electrode (SngCE) modified with bentonite (BENT) shows an interesting alternative electrode to be used in the determination of 1,4-benzodiazepines by square wave adsorptive cathodic stripping voltammetry (SWAdCSV). Diazepam (DZ) and chlordiazepoxide hydrochloride (CPZ), were determined using SngCE modified by 5% BENT. An electrochemical study of different parameters (such as pH, buffer type, ionic strength, accumulation potential, scan rate, and accumulation time) which affect the determination of DZ and CPZ is reported. Linear concentration ranges of 0.028-0.256 μg mL(-1) DZ (r=0.9997) and 0.034-0.302 μg mL(-1) CPZ (r=0.9997) are successfully obtained after an accumulation time of 60s. The quantification and detection limits were calculated to be 14.0 and 4.0 ng mL(-1) for DZ, and 16.0 and 5.0 ng mL(-1) for CPZ, respectively. The surface of the proposed electrode was characterized by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). The developed method was applied to the analysis of commercially available tablets and human urine real samples. Analysis was performed with better precision, very low detection limits, and faster than previously reported voltammetric techniques.

Investigation of biosensor signal bioamplification: comparison of direct electrochemistry phenomena of individual Laccase, and dual Laccase-Tyrosinase copper enzymes, at a Sonogel-Carbon electrode.

Direct electrochemistry of Trametes versicolor Laccase (LAC) was found at a Sonogel-Carbon electrode. The bioamplification, performed by dual immobilization of this enzyme and Mushroom Tyrosinase (TYR), of the bio-electrocatalytic reduction of O(2) was investigated. The calculated alpha transfer coefficients were 0.64 and 0.67, and the heterogeneous electron-transfer rate constants were 6.19 and 8.52 s(-1), respectively, for the individual LAC and dual LAC-TYR-based Nafion/Sonogel-Carbon bio-electrodes. The responses of the dual enzymes electrode to polyphenols were stronger than those of the individual LAC or TYR biosensors. Hypotheses are offered about the mechanism of bioamplification. The surfaces of the biosensors were also characterized by AFM.

Graphite grains studded with silver nanoparticles: description and application in promoting direct biocatalysis between heme protein and the resulting carbon paste electrode.

The impregnation of graphite grains with silver nanoparticles (AgNPs) is proposed for making a novel carbon paste electrode (CPE). The resulting material promotes direct electron transfer and direct biocatalysis of embedded heme protein. It is demonstrated that the impregnation of graphite grains with AgNPs of 16-25 nm, incorporated in a CPE, can promote measurable bio-electrochemical phenomena involving hemoglobin and myoglobin. Unlike other biosensors prepared with simple carbon, those based on carbon grains studded with AgNPs show well-defined and quasi-reversible voltammetric peak with heterogeneous electron transfer rate k(s) of approximately 0.037±0.007 and 0.013±0.005s(-1) for hemoglobin and myoglobin, respectively. The embedded proteins also retain their bio-catalytical activity for hydrogen peroxide and nitrite reduction with linear ranges of 0.5-3000 μM and 30-150 μM, sensitivities of 73.6±0.6nA μM(-1) and 5.72±0.11 nA μM(-1), and detection limits close to 0.08 μM and 5.80 μM, for these two analytes respectively. These results support the viability of this preliminary approach for the development of advanced third-generation biosensors.