Mohd Asri Mat Teridi

Defect chemistry and defect engineering of TiO2-based semiconductors for solar energy conversion

This tutorial review considers defect chemistry of TiO2 and its solid solutions as well as defect-related properties associated with solar-to-chemical energy conversion, such as Fermi level, bandgap, charge transport and surface active sites. Defect disorder is discussed in terms of defect reactions and the related charge compensation. Defect equilibria are used in derivation of defect diagrams showing the effect of oxygen activity and temperature on the concentration of both ionic and electronic defects. These defect diagrams may be used for imposition of desired semiconducting properties that are needed to maximize the performance of TiO2-based photoelectrodes for the generation of solar hydrogen fuel using photo electrochemical cells (PECs) and photocatalysts for water purification. The performance of the TiO2-based semiconductors is considered in terms of the key performance-related properties (KPPs) that are defect related. It is shown that defect engineering may be applied for optimization of the KPPs in order to achieve optimum performance.

A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells

This review summarizes the current designs and development of new types of organic small molecules as a hole-transporting material (HTM) in a meso-structured perovskite solar cell (PSC). The roles of each layer in the meso-structured perovskite device architecture are elaborated and the employment of new types of organic HTMs in the device is compared with the commercially available HTM spiro-OMeTAD in terms of the properties, device performance and stability. The studies found that nearly half of the new synthesized and pristine HTMs have comparable or better photovoltaic properties than those of doped spiro-OMeTAD. These HTMs have the characteristics of a fused planar core structure with extended π-conjugated lengths and electron-donating functional groups, which are believed to contribute to their high intrinsic conductivity and help make them an alternative to spiro-OMeTAD as a better HTM in meso-structured PSCs. Some of the devices based on the new synthesized HTMs even have longer device lifetimes than their spiro-OMeTAD-based PSC counterparts. Moreover, studies found that the cost per gram (Cg) and cost-per-peak Watt (Cw) of synthesized HTMs can be reduced via minimizing the number of synthesis steps and by optimization of the starting materials in order to yield low-cost HTMs for meso-structured PSC applications.

Stable and null current hysteresis perovskite solar cells based nitrogen doped graphene oxide nanoribbons hole transport layer

Perovskite solar cells are becoming one of the leading technologies to reduce our dependency on traditional power sources. However, the frequently used component poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has several shortcomings, such as an easily corroded indium-tin-oxide (ITO) interface at elevated temperatures and induced electrical inhomogeneity. Herein, we propose solution-processed nitrogen-doped graphene oxide nanoribbons (NGONRs) as a hole transport layer (HTL) in perovskite solar cells, replacing the conducting polymer PEDOT:PSS. The conversion efficiency of NGONR-based perovskite solar cells has outperformed a control device constructed using PEDOT:PSS. Moreover, our proposed NGONR-based devices also demonstrate a negligible current hysteresis along with improved stability. This work provides an effective route for substituting PEDOT:PSS as the effective HTL.

The Application of Graphene and Its Derivatives to Energy Conversion, Storage, and Environmental and Biosensing Devices

Graphene (GR) and its derivatives are promising materials on the horizon of nanotechnology and material science and have attracted a tremendous amount of research interest in recent years. The unique atom-thick 2D structure with sp(2) hybridization and large specific surface area, high thermal conductivity, superior electron mobility, and chemical stability have made GR and its derivatives extremely attractive components for composite materials for solar energy conversion, energy storage, environmental purification, and biosensor applications. This review gives a brief introduction of GRs unique structure, band structure engineering, physical and chemical properties, and recent energy-related progress of GR-based materials in the fields of energy conversion (e.g., photocatalysis, photoelectrochemical water splitting, CO2 reduction, dye-sensitized and organic solar cells, and photosensitizers in photovoltaic devices) and energy storage (batteries, fuel cells, and supercapacitors). The vast coverage of advancements in environmental applications of GR-based materials for photocatalytic degradation of organic pollutants, gas sensing, and removal of heavy-metal ions is presented. Additionally, the use of graphene composites in the biosensing field is discussed. We conclude the review with remarks on the challenges, prospects, and further development of GR-based materials in the exciting fields of energy, environment, and bioscience.

Effect of synergic cooperation on optical and photoelectrochemical properties of CeO2–MnO composite thin films

CeO2–MnO composite thin films have been deposited on glass substrates, which were coated with fluorine-doped tin oxide (FTO), by aerosol-assisted chemical vapor deposition (AACVD) using a 1 : 1 mixture of the cerium complex [Ce(OCOCF3)4]−[(CH3)2NHCH2CH2OH]+ (1) and acetatomanganese(II). X-ray diffraction (XRD), Raman spectroscopy and profilometry were used to investigate the phase purity, stoichiometry and thickness of the films. EDX results confirmed that the Ce : Mn ratio was 1 : 9 in the deposited composite thin films. FEG-SEM analysis illustrated that the morphology of the fabricated films was influenced by the deposition temperature and hence the optoelectronic properties. UV-vis studies of a composite thin film fabricated from methanol solution at 475 °C demonstrate a direct band gap of 2.5 eV. From its current–voltage characteristics it is evident that a CeO2–MnO composite semiconductor electrode exhibits n-type behavior and the photocurrent was strongly dependent on the deposition temperature. A CeO2–MnO photoanode deposited at 475 °C for 45 min from a 0.023 M solution of (1) and acetatomanganese(II) in methanol gave a maximum photocurrent density of 265 μA cm−2 at 0.65 V vs. Ag/AgCl/3 M KCl using a 0.5 M NaOH electrolyte.

Null current hysteresis for acetylacetonate electron extraction layer in perovskite solar cells

Solution processed zirconium acetylacetonate (Zr(acac)) is successfully employed as an electron extraction layer, replacing conventional titanium oxide, in planar CH3NH3PbI3 perovskite solar cells. The as-prepared Zr(acac) film possesses high transparency, high conductivity, a smooth morphology, high wettability, compatibility with PbI2 DMF solution, and an energy level matching that of CH3NH3PbI3 perovskite material. An average power conversion efficiency of about 11.93%, along with a high fill factor of 74.36%, an open circuit voltage of 1.03 V, and a short-circuit current density of 15.58 mA cm(-2) is achieved. The overall performance of the devices is slight better than that of cells using ruthenium acetylacetonate (Ru(acac)). The differences between solar cells with different electron extraction layers in charge recombination, charge transport and transfer and lifetime are further explored and it is demonstrate that Zr(acac) is a more effective and promising electron extraction layer. This work provides a simple, and cost effective route for the preparation of an effective hole extraction layer.

A Mini Review: Can Graphene Be a Novel Material for Perovskite Solar Cell Applications?

Perovskite solar cells (PSCs) have raised research interest in scientific community because their power conversion efficiency is comparable to that of traditional commercial solar cells (i.e., amorphous Si, GaAs, and CdTe). Apart from that, PSCs are lightweight, are flexible, and have low production costs. Recently, graphene has been used as a novel material for PSC applications due to its excellent optical, electrical, and mechanical properties. The hydrophobic nature of graphene surface can provide protection against air moisture from the surrounding medium, which can improve the lifetime of devices. Herein, we review recent developments in the use of graphene for PSC applications as a conductive electrode, carrier transporting material, and stabilizer material. By exploring the application of graphene in PSCs, a new class of strategies can be developed to improve the device performance and stability before it can be commercialized in the photovoltaic market in the near future.

Heterojunction Cr2O3/CuO:Ni photocathodes for enhanced photoelectrochemical performance

Heterojunction p-type photoelectrodes consisting of chromium oxide (Cr2O3) and copper oxide (CuO)-doped nickel (Ni) were prepared using aerosol-assisted chemical vapour deposition (AACVD) and spin-coating. All samples were photoresponsive and showed a photocathodic current in 0.5 M Na2SO4 under simulated solar illumination. The photocathode with an optimal composition of 3 layers of CuO and 0.5% Ni showed an enhanced photoactivity relative to bare Cr2O3. Based on the optical characterization and the flatband potential calculation, the fabricated Cr2O3, Cr2O3/CuO and Cr2O3/CuO:Ni can absorb visible light, which enables the water reduction reaction. Moreover, electrochemical impedance spectroscopy revealed that the charge transfer resistance of Cr2O3/CuO:Ni was decreased. Thus, in the heterojunction structure, the photogenerated electrons in Cr2O3 were transferred to the CuO:Ni layer, which then contributes to a high photoactivity. The combined advantages of the two strategies (heterojunction and doping) provide favourable charge transport characteristics of the materials.

The architecture of the electron transport layer for a perovskite solar cell

The emergence of perovskite solar cells (PSCs) recently has brought new hope to the solar cell industry due to their incredible improvement of the power conversion efficiency (PCE), which can now exceed 20.0% within seven years of tremendous research. The efficiency and stability of PSCs depend strongly on the morphology and type of materials selected as the electron transport layer (ETL) in the device. In this review, the functions of the ETL based on titania (TiO2) in n–i–p architecture PSCs, including planar heterojunction and mesoporous-structured devices, are reviewed in terms of the device performance and stability. Studies found that the application of suitable fabrication techniques and manipulation of the nanostructural properties of TiO2 are crucial factors in ameliorating the short-circuit current density, JSC, and fill factor, FF, of PSCs. On top of that, the effect of substituting TiO2 with other potential inorganic materials like zinc oxide (ZnO), tin oxide (SnO2), ternary metal oxides, and metal sulphides, as well as organic semiconductors including fullerene, graphene, and ionic liquids, towards the photovoltaic properties and stability of the devices are also elaborated and discussed. Meanwhile, the utilization of non-electron transport layers (non-ETLs), such as alumina (Al2O3) and zirconia (ZrO2), as the mesoporous scaffold in PSCs is found to enhance the open-circuit voltage, VOC, of the devices.

Progress towards highly stable and lead-free perovskite solar cells

High-performance perovskite solar cells have attracted increased attention for photovoltaic applications and potentially replacing the predecessor generations. Nevertheless, the stability issues and the lead content has always been among the major concerns that barriers perovskite solar cells from commercialization. This review presents the discussion towards the inherent instability of perovskite solar cells and the development towards replacing lead with discussion towards their performance and challenges. The degradation of perovskite active layer would release toxic substance into the environment. The development towards low-toxic, lead-free and efficient perovskite solar cells is the key for a sustainable solar energy generation with the application of perovskite solar cells.