Mónica P. Garcia

Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy

The high corrosion rate of magnesium alloys is the main drawback to their widespread use, especially in biomedical applications. There is a need for developing new coatings that provide simultaneously corrosion resistance and enhanced biocompatibility. In this work, a composite coating containing polyether imide, with several diethylene triamine and hydroxyapatite contents, was applied on AZ31 magnesium alloys pre-treated with hydrofluoric acid by dip coating. The coated samples were immersed in Hanks solution and the coating performance was studied by electrochemical impedance spectroscopy and scanning electron microscopy. In addition, the behavior of MG63 osteoblastic cells on coated samples was investigated. The results confirmed that the new coatings not only slow down the corrosion rate of AZ31 magnesium alloys in Hanks solution, but also enhance the adhesion and proliferation of MG63 osteoblastic cells, especially when hydroxyapatite nanoparticles were introduced in the coating formulation.

Preparation and characterization of collagen‐nanohydroxyapatite biocomposite scaffolds by cryogelation method for bone tissue engineering applications

Recent efforts of bone repair focus on development of porous scaffolds for cell adhesion and proliferation. Collagen-nanohydroxyapatite (HA) scaffolds (70:30; 50:50; and 30:70 mass percentage) were produced by cryogelation technique using 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide hydrochloride/N-hydroxysuccinimide as crosslinking agents. A pure collagen scaffold was used as control. Morphology analysis revealed that all cryogels had highly porous structure with interconnective porosity and the nanoHA aggregates were randomly dispersed throughout the scaffold structure. Chemical analysis showed the presence of all major peaks related to collagen and HA in the biocomposites and indicated possible interaction between nanoHA aggregates and collagen molecules. Porosity analysis revealed an enhancement in the surface area as the nanoHA percentage increased in the collagen structure. The biocomposites showed improved mechanical properties as the nanoHA content increased in the scaffold. As expected, the swelling capacity decreased with the increase of nanoHA content. In vitro studies with osteoblasts cells showed that they were able to attach and spread in all cryogels surfaces. The presence of collagen-nanoHA biocomposites resulted in higher overall cellular proliferation compared to pure collagen scaffold. A statistically significant difference between collagen and collagen-nanoHA cryogels was observed after 21 day of cell culture. These innovative collagen-nanoHA cryogels could have potentially appealing application as scaffolds for bone regeneration.

Exploring Bioactive Properties of Marine Cyanobacteria Isolated from the Portuguese Coast: High Potential as a Source of Anticancer Compounds

The oceans remain a major source of natural compounds with potential in pharmacology. In particular, during the last few decades, marine cyanobacteria have been in focus as producers of interesting bioactive compounds, especially for the treatment of cancer. In this study, the anticancer potential of extracts from twenty eight marine cyanobacteria strains, belonging to the underexplored picoplanktonic genera, Cyanobium, Synechocystis and Synechococcus, and the filamentous genera, Nodosilinea, Leptolyngbya, Pseudanabaena and Romeria, were assessed in eight human tumor cell lines. First, a crude extract was obtained by dichloromethane:methanol extraction, and from it, three fractions were separated in a Si column chromatography. The crude extract and fractions were tested in eight human cancer cell lines for cell viability/toxicity, accessed with the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) and lactic dehydrogenase release (LDH) assays. Eight point nine percent of the strains revealed strong cytotoxicity; 17.8% showed moderate cytotoxicity, and 14.3% assays showed low toxicity. The results obtained revealed that the studied genera of marine cyanobacteria are a promising source of novel compounds with potential anticancer activity and highlight the interest in also exploring the smaller filamentous and picoplanktonic genera of cyanobacteria.

Biofunctional composite coating architectures based on polycaprolactone and nanohydroxyapatite for controlled corrosion activity and enhanced biocompatibility of magnesium AZ31 alloy

In this work a biofunctional composite coating architecture for controlled corrosion activity and enhanced cellular adhesion of AZ31 Mg alloys is proposed. The composite coating consists of a polycaprolactone (PCL) matrix modified with nanohydroxyapatite (HA) applied over a nanometric layer of polyetherimide (PEI). The protective properties of the coating were studied by electrochemical impedance spectroscopy (EIS), a non-disturbing technique, and the coating morphology was investigated by field emission scanning electron microscopy (FE-SEM). The results show that the composite coating protects the AZ31 substrate. The barrier properties of the coating can be optimized by changing the PCL concentration. The presence of nanohydroxyapatite particles influences the coating morphology and decreases the corrosion resistance. The biocompatibility was assessed by studying the response of osteoblastic cells on coated samples through resazurin assay, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results show that the polycaprolactone to hydroxyapatite ratio affects the cell behavior and that the presence of hydroxyapatite induces high osteoblastic differentiation.

Bisphosphonates induce the osteogenic gene expression in co-cultured human endothelial and mesenchymal stem cells.

Bisphosphonates (BPs) are known to affect bone homeostasis and also to have anti‐angiogenic properties. Because of the intimate relationship between angiogenesis and osteogenesis, this study analysed the effects of Alendronate (AL) and Zoledronate (ZL) in the expression of endothelial and osteogenic genes on interacting endothelial and mesenchymal stem cells, an issue that was not previously addressed. Alendronate and ZL, 10−12–10−6 M, were evaluated in a direct co‐culture system of human dermal microvascular endothelial cells (HDMEC) and human bone marrow mesenchymal stem cells (HMSC), over a period of 14 days. Experiments with the respective monocultures were run in parallel. Alendronate and ZL caused an initial dose‐dependent stimulation in the cell proliferation in the monocultures and co‐cultures, and did not interfere with their cellular organization. In HDMEC monocultures, the expression of the endothelial genes CD31, VE‐cadherin and VEGFR2 was down‐regulated by AL and ZL. In HMSC monocultures, the BPs inhibited VEGF expression, but up‐regulated the expression of the osteogenic genes alkaline phosphatase (ALP), bone morphogenic protein‐2 (BMP‐2) and osteocalcin (OC) and, to a greater extent, osteoprotegerin (OPG), a negative regulator of the osteoclastic differentiation, and increased ALP activity. In co‐cultured HDMEC/HMSC, AL and ZL decreased the expression of endothelial genes but elicited an earlier and sustained overexpression of ALP, BMP‐2, OC and OPG, compared with the monocultured cells; they also induced ALP activity. This study showed for the first time that AL and ZL greatly induced the osteogenic gene expression on interacting endothelial and mesenchymal stem cells.

Development and Characterization of Lanthanides Doped Hydroxyapatite Composites for Bone Tissue Application

This work reports the preparation and characterization of newly developed 10CaF2-10Na2CO3-15CaO-59P205-5Si02 glasses, doped with lanthanides, in this case cerium and lanthanum oxide (10CaF2-10Na2CO3-15CaO-59P205-1CeO2-5SiO2 and 10CaF2-10Na2CO3-15CaO-59P205-1La2O3-5SiO2, respectively). The structure and morphology of the developed glasses have been investigated by Raman and FTIR spectroscopy. Scanning electron microscopy with an energy dispersive analyzer and X-ray mapping was used to assess the morphological properties of the glasses. Glass-ceramic composites, for bone tissue applications, were obtained by the mixture of 2.5wt% of each glass with 97.5wt% of hydroxyapatite. These were also analyzed by means of XRD and SEM. Composites were biologically evaluated with human osteoblastic-like cells. Lanthanide doped-hydroxyapatite composites revealed an improved biological behaviour, regarding cell adhesion and proliferation, compared to hydroxyapatite and undoped glass- hydroxyapatite composites. Lanthanide doped composites reported an adequate biocompatibility, further enhancing the cell adhesion and proliferation, behaviour that indicates a prospective application in bone tissue engineering.

Acute and Long-Term Effects of Hyperthermia in B16-F10 Melanoma Cells

Objective Hyperthermia uses exogenous heat induction as a cancer therapy. This work addresses the acute and long-term effects of hyperthermia in the highly metastatic melanoma cell line B16-F10. Materials and Methods Melanoma cells were submitted to one heat treatment, 45°C for 30 min, and thereafter were kept at 37°C for an additional period of 14 days. Cultures maintained at 37°C were used as control. Cultures were assessed for the heat shock reaction. Results Immediately after the heat shock, cells began a process of fast degradation, and, in the first 24 h, cultures showed decreased viability, alterations in cell morphology and F-actin cytoskeleton organization, significant reduction in the number of adherent cells, most of them in a process of late apoptosis, and an altered gene expression profile. A follow-up of two weeks after heat exposure showed that viability and number of adherent cells remained very low, with a high percentage of early apoptotic cells. Still, heat-treated cultures maintained a low but relatively constant population of cells in S and G2/M phases for a long period after heat exposure, evidencing the presence of metabolically active cells. Conclusion The melanoma cell line B16-F10 is susceptible to one hyperthermia treatment at 45°C, with significant induced acute and long-term effects. However, a low but apparently stable percentage of metabolically active cells survived long after heat exposure.

Acrylic formulations containing bioactive and biodegradable fillers to be used as bone cements: properties and biocompatibility assessment.

The solid phase of bioactive self-curing acrylic cements was modified by different biodegradable fillers such as poly(3-hydroxybutyrate) (PHB) and its copolymer with hydroxyvalerate (PHBV). The addition of the biodegradable fillers made the cement partially degradable, which is important to allow new bone replacement and ingrowth. The thermal analysis, crystallinity, curing parameters, mechanical properties, degradation and cellular tests were studied in order to characterize the cement performance. Within this context it was verified that the incorporation of the PHBV polymer made the cement more resistant, reaching values within the range reported for typical PMMA bone cements. The results also showed that the cement filled with PHBV took up more water than the cement with PHB after 60 days, for all studied formulations. Regarding the osteoblastic cytocompatibility assessment, the inclusion of the PHBV greatly improved the biological response in both cements filled with the silicate or the borate glass, compared to the inclusion of the PHB. The importance of this novel approach resides on the combination of the properties of the cements components and the possibility of allowing bone regeneration, improving the interfaces with both the prosthesis and the bone, and leading to a new material with suitable performance for application as bone cement.

Highly focalised thermotherapy using a ferrimagnetic cement in the treatment of a melanoma mouse model by low temperature hyperthermia

Purpose: Evaluation of the effectiveness of highly focalised thermotherapy (HFT) in a melanoma mouse model, using a ferrimagnetic cement (FC) and repeated low hyperthermia treatments. Materials and methods: A melanoma mouse model was induced with B16F10 cells in C57BL6 mice. The FC, injected into the tumour, was used as the magnetic vehicle for HFT. FC location within the tumour was assessed by radiography and its capability to generate heat, when exposed to an external high frequency magnetic field (HFMF), monitored by thermal camera. The HFT treatment consisted of three HFMF exposures, with 48-h intervals, each one lasting 30 min, with a 5–6°C tumour temperature increase. At the end of the experiment, FC samples were characterised by scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS). The presence of iron contents was analysed in the tumour, lungs, liver and spleen. Histological evaluation and immunohistochemical staining for caspase-3 were performed. Tumour growth was monitored during the experiment. Results: Surface analysis showed FC stabilisation within the tumour, and iron was absent. The thermal camera confirmed the localised temperature increase in the tumour. HFT treatments inhibited the tumour growth by ∼70% compared to controls. This was due to cell destruction by necrosis and apoptosis. Conclusions: The HFT, using the FC, proved to be a minimally invasive technique that statistically inhibited tumour growth. Results suggested that this methodology seems to be a promising technique for the treatment of solid tumours, allowing repeated low hyperthermia treatments, which can be easier and less traumatic than other hyperthermia techniques.

Properties and osteoblast cytocompatibility of self-curing acrylic cements modified by glass fillers.

Materials filled with a silicate glass (MSi) and a borate glass (MB) were developed and compared in terms of their in vitro behavior. The effect of filler composition and concentration (0, 30, 40 and 50 wt%) on the curing parameters, residual monomer, water uptake, weight loss, bioactivity, mechanical properties (bending and compression) and osteoblast cytocompatibility was evaluated. The addition of bioactive glass filler significantly improved the cements curing parameters and the mechanical properties. The most relevant results were obtained for the lower filler concentration (30 wt%) a maximum flexural strength of 40.4 MPa for MB3 and a maximum compressive strength of 95.7 MPa for MSi3. In vitro bioactivity in acellular media was enhanced by the higher glass contents in the cements. Regarding the biological assessment, the incorporation of the silicate glass significantly improved osteoblast cytocompatibility, whereas the presence of the borate glass resulted in a poor cell response. Nevertheless it was shown that the surviving cells on the MB surface were in a more differentiated stage compared to those growing over non-filled poly(methyl methacrylate). Results suggest that the developed formulations offer a high range of properties that might be interesting for their use as self-curing cements.