Monika Chylińska

Imaging of polysaccharides in the tomato cell wall with Raman microspectroscopy

BackgroundThe primary cell wall of fruits and vegetables is a structure mainly composed of polysaccharides (pectins, hemicelluloses, cellulose). Polysaccharides are assembled into a network and linked together. It is thought that the percentage of components and of plant cell wall has an important influence on mechanical properties of fruits and vegetables.ResultsIn this study the Raman microspectroscopy technique was introduced to the visualization of the distribution of polysaccharides in cell wall of fruit. The methodology of the sample preparation, the measurement using Raman microscope and multivariate image analysis are discussed. Single band imaging (for preliminary analysis) and multivariate image analysis methods (principal component analysis and multivariate curve resolution) were used for the identification and localization of the components in the primary cell wall.ConclusionsRaman microspectroscopy supported by multivariate image analysis methods is useful in distinguishing cellulose and pectins in the cell wall in tomatoes. It presents how the localization of biopolymers was possible with minimally prepared samples.

Combining FT-IR spectroscopy and multivariate analysis for qualitative and quantitative analysis of the cell wall composition changes during apples development

The aim of this work was to quantitatively and qualitatively determine the composition of the cell wall material from apples during development by means of Fourier transform infrared (FT-IR) spectroscopy. The FT-IR region of 1500-800 cm(-1), containing characteristic bands for galacturonic acid, hemicellulose and cellulose, was examined using principal component analysis (PCA), k-means clustering and partial least squares (PLS). The samples were differentiated by development stage and cultivar using PCA and k-means clustering. PLS calibration models for galacturonic acid, hemicellulose and cellulose content from FT-IR spectra were developed and validated with the reference data. PLS models were tested using the root-mean-square errors of cross-validation for contents of galacturonic acid, hemicellulose and cellulose which was 8.30 mg/g, 4.08% and 1.74%, respectively. It was proven that FT-IR spectroscopy combined with chemometric methods has potential for fast and reliable determination of the main constituents of fruit cell walls.

Study on dietary fibre by Fourier transform-infrared spectroscopy and chemometric methods.

Fresh fruit is an important part of the diet of people all over the world as a significant source of water, vitamins and natural sugars. Nowadays it is also one of the main sources of dietary fibre. In fruit the dietary fibre is simply cell wall consisting essentially of polysaccharides. The aim of present study was to predict the contents of pectins, cellulose and hemicelluloses by partial least squares regression (PLS) analysis on the basis of Fourier transform-infrared (FT-IR) spectra of fruit cell wall residue. The second purpose was to analyse the composition of dietary fibre from fruit based on FT-IR spectral information in combination with chemometric methods (principle components analysis (PCA) and hierarchical cluster analysis (HCA)). Additionally the contents of polysaccharides in studied fruits were determined by analytical methods. It has been shown that the analysis of infrared spectra and the use of multivariate statistical methods can be useful for studying the composition of dietary fibre.

Determination of the Optimum Harvest Window for Apples Using the Non-Destructive Biospeckle Method

Determination of the optimum harvest window plays a key role in the agro-food chain as the quality of fruit depends on the right harvesting time and appropriate storage conditions during the postharvest period. Usually, indices based on destructive measurements are used for this purpose, like the De Jager Index (PFW-1), FARS index and the most popular Streif Index. In this study, we proposed a biospeckle method for the evaluation of the optimum harvest window (OHW) of the “Ligol” and “Szampion” apple cultivars. The experiment involved eight different maturity stages, of which four were followed by long cold storage and shelf life to assist the determination of the optimum harvest window. The biospeckle activity was studied in relation to standard quality attributes (firmness, acidity, starch, soluble solids content, Streif Index) and physiological parameters (respiration and ethylene emission) of both apple cultivars. Changes of biospeckle activity (BA) over time showed moderate relationships with biochemical changes during apple maturation and ripening. The harvest date suggested by the Streif Index and postharvest quality indicators matched with characteristic decrease in BA. The ability of biospeckle method to characterize the biological state of apples was confirmed by significant correlations of BA with firmness, starch index, total soluble solids and Streif Index, as well as good match with changes in carbon dioxide and ethylene emission. However, it should be noted that correlations between variables changing over time are not as meaningful as independent observations. Also, it is a well-known property of the Pearson’s correlation that its value is highly susceptible to outlier data. Due to its non-selective nature the BA reflected only the current biological state of the fruit and could be affected by many other factors. The investigations showed that the optimum harvest window for apples was indicated by the characteristic drop of BA during pre-harvest development. Despite this, at the current state of development the BA method cannot be used as an indicator alone. Due to rather poor results for prediction in OHW the BA measurements should be supported by other destructive methods to compensate its low selectivity.

Isolation and Characterization of Cellulose from Different Fruit and Vegetable Pomaces

A new fractionation process was developed to achieve valorization of fruit and vegetable pomaces. The importance of the residues from fruits and vegetables is still growing; therefore; the study presents the novel route of a fractioning process for the conversion of agro-industrial biomasses, such as pomaces, into useful feedstocks with potential application in the fields of fuels, chemicals, and polymers. Hence, the biorefinery process is expected to convert them into various by-products offering a great diversity of low-cost materials. The final product of the process is the cellulose of the biofuel importance. The study presents the novel route of the fractioning process for the conversion of agro-industrial biomasses, such as pomaces, into useful feedstocks with a potential application in the fields of fuels, chemicals, and polymers. Therefore the aim of this paper was to present the novel route of the pomaces fraction and the characterization of residuals. Pomaces from apple, cucumber, carrot, and tomato were treated sequentially with water, acidic solution, alkali solution, and oxidative reagent in order to obtain fractions reach in sugars, pectic polysaccharides, hemicellulose, cellulose, and lignin. Pomaces were characterized by dry matter content, neutral detergent solubles, hemicellulose, cellulose, and lignin. Obtained fractions were characterized by the content of pectins expressed as galacturonic acid equivalent and hemicelluloses expressed as a xyloglucan equivalent. The last fraction and residue was cellulose characterized by crystallinity degree by X-ray diffractometer (XRD), microfibril diameter by atomic force microscope (AFM), and overall morphology by scanning electron microscope (SEM). The hemicelluloses content was similar in all pomaces. Moreover, all the materials were characterized by the high pectins level in extracts evaluated as galacturonic acid content. The lignins content compared with other plant biomasses was on a very low level. The cellulose fraction was the highest in cucumber pomace. The cellulose fraction was characterized by crystallinity degree, microfibril diameter, and overall morphology. Isolated cellulose had a very fine structure with relatively high crystalline index but small crystallites.

Changing of biochemical parameters and cell wall polysaccharides distribution during physiological development of tomato fruit

This study was aimed at discovering an impact of biochemical parameters (like content of cell wall polysaccharides, phenolic compounds, ascorbic acid or activity of pectinolytic enzymes) on cell wall microstructure during physiological fruit development. Cell wall microstructure as well as changes in the polysaccharides distribution were examined by confocal Raman microscopy. Also there was a need to simultaneous usage of reference method which is immunolabeling. A tomato fruit (Solanum lycopersicum cv Cerise) has been selected to observe the changes taking place in the fruit cell wall as it recently has been recognized as a model species for exploring fruit development processes such as fruit formation and ripening. Our studies showed that chemical images allows to depict changes in spatial distribution of polysaccharides in plant cell wall (including the middle lamella area), thus this technique allows to observation of cell wall degradation during tomato ripening (mainly pectic polysaccharides degradation). It seems that high level of pectinolytic enzymes activity and increasing content of ascorbate and hence decrease of pectins content have a significant impact on spatial distribution of biopolymers in fruit cell wall.

Structural network of arabinogalactan proteins (AGPs) and pectins in apple fruit during ripening and senescence processes

The cell wall is an essential framework determining the overall form of the plant cell. Our study was focused on the distribution of arabinogalactan proteins (AGPs), arabinan, and homogalacturonan in fruit cells during ripening and storage with emphasis on quantitative analysis of their presence in particular regions of the cell wall - plasma membrane. The localization of the examined compounds was determined with immunohistochemistry techniques and immunogold labelling. Spatio-temporal colocalization between AGPs epitopes - [βGlcA(1→3)-αGalA(1→2)Rha] recognized by JIM13 and MAC207 antibodies, and arabinan labelled by the LM16 antibody was detected in the inner cell wall layer, in association with the plasma membrane. The specific arrangement of AGP and arabinan epitopes differentiated them from homogalacturonan epitopes, consisting of GalA residues recognized by LM19 and LM20 antibodies in all the examined fruit maturity stages. The disruption of cell wall - plasma membrane continuum, observed during ripening-associated softening process, was associated with both the substantial decrease of AGPs, pectins content and with remodeling of their arrangement. The results indicate that the textural properties of fruit during growth and postharvest storage, an attribute of fruit quality becoming selection criteria for consumers, depend on the existence of dynamic network organizing polysaccharides and glycoproteins in the extracellular matrix.

Structural, mechanical and enzymatic study of pectin and cellulose during mango ripening

Mango is an important crop worldwide, with a postharvest loss that is huge due to its climacteric behaviour. This study evaluated the softening of Tommy Atkins mangos during the ripening process. Ripening index (RPI) shown a decrease from 9.18 ± 0.14 to 4.75 ± 0.47. The enzymatic activity agreed with physicochemical parameters and with the structural and mechanical changes. Three pectin fractions were isolated from the mango cell wall: water soluble (WSP), chelator soluble (CSP) and diluted alkali soluble (DASP) pectin. The Younǵs modulus (E) of the primary cell wall was evaluated, it decreased from 1.69 ± 1.02 to 0.39 ± 0.16 MPa, which could be attributed to the softening of the fruit. A linear fit correlation between E and RPI was found. X-ray and confocal laser scanning microscopy analysis showed the changes occurred in the mango cell wall structure during maturation. Novelties of current study can be helpful in the use of mango wastes to obtain cellulose.

Distribution of arabinogalactan proteins and pectins in the cells of apple (Malus × domestica) fruit during post-harvest storage

Background and Aims Changes in the arrangement of cell wall components determine cell wall properties (integrity, stiffness), thereby affecting the macro-scale properties of fruits, which are important for consumers and industry. Arabinogalactan proteins (AGPs) are ubiquitous components of the plant cell, in which they have various functions. Currently, AGPs are considered to be one of the less well-known, enigmatic proteoglycans, a consequence of their heterogeneous structure and unclear mechanism of activity. Methods An immunocytochemical study was conducted to elucidate the distribution of AGPs and pectic polysaccharides contained in apple (Malus × domestica) fruit during senescence. De-esterified homogalacturonan (LM19), methyl-esterified homogalacturonan (LM20), processed arabinan (LM16) and three AGP epitopes (JIM13, JIM15, MAC207) were identified in the fruit at three stages: fresh fruit, and fruit at 1 and 3 months of post-harvest storage. Key Results Microscopy revealed spatio-temporal changes in the localization of all examined epitopes. Changes of fruit cell wall assembly and its degradation were confirmed by determination of the galacturonic acid content in the WSP (water soluble pectins), CSP (chelator soluble pectins) and DASP (dilute alkali soluble pectins) fractions. Conclusions The results revealed dependencies between AGPs, arabinan and homogalacturonan distribution in apple fruit, which are correlated with changes in microstructure during senescence. We propose that AGPs are involved in establishment of the cell wall - plasma membrane continuum.

Simultaneous influence of pectin and xyloglucan on structure and mechanical properties of bacterial cellulose composites

The impact of the matrix polysaccharides on the cellulose microfibrils structure as well as on the mechanical properties of cell walls still remains an open question. Therefore, the aim of investigations was to determine the simultaneous influence of (i) different concentrations of pectins with constant concentration of xyloglucan, and (ii) different concentrations of xyloglucan with constant concentration of pectins on cellulose structure. Composites of bacterial cellulose (BC) produced by Komagataeibacter xylinus are considered to mimic natural plant cell walls. This investigation showed that the lower the ratio of xyloglucan to pectin was, the higher Youngs modulus of BC composite was and also obtained cellulose microfibrils were thinner. The increasing concentration of xyloglucan to pectin also caused the drop down in microfibrils crystallinity degree with predominant structure of cellulose Iβ. In that case, also the length of cellulose chains was growing and reaching the highest value among all BC composites.