Montserrat Soliva

An assessment of the characteristics of yard trimmings and recirculated yard trimmings used in biowaste composting.

The aim of this research was to characterise samples of yard trimmings (YT) and recirculated yard trimmings (RYT) that are used to co-compost organic fraction of municipal solid waste (OFMSW) taken from 18 composting facilities in Catalonia (NE Spain), to determine their contribution in the composting process, and to highlight the advantages and disadvantages of reusing RYT. We found significant differences between the characteristics of the two materials. RYT had higher pH levels, electrical conductivity, and organic and ammonium nitrogen content than YT. Nutrient content also shows an increment from YT to RYT, and in the case of P and K, this variation can be attributed to an exogenous source rather than the relative concentration during the composting process. We also found significant differences in particle size distribution and bulk density. From the results, it can be assumed that RYT could be reused in the composting process if OFMSW, YT, and RYT are used in the correct quantities to balance the mixture but they cannot totally replace the features of YT.

Bulk density determination as a simple and complementary tool in composting process control.

Ten composting facilities (CF) treating source-sorted organic fraction of municipal solid waste (OF) were sampled to study the relationship between the bulk density and the composting process (CP) development. Hundred and fourteen samples from different stages of the CP were considered (organic fraction, initial mixture, final decomposition, final maturation and compost), including the reject materials coming from the densimetric table at postprocessing. Total organic matter (TOM), moisture content (MC), wet bulk density and dry basis (BDd) were determined. Significant differences were detected for MC, TOM and BDd between some stages of the CP. The BDd increased along the CP while TOM decreased. Correlation studies showed a significant negative relationship between TOM and bulk density, especially BDd, during the CP, as a result of the biological activity. Moreover, a clear relationship was also found between TOM and BDd in samples related to reject materials. The results indicate that bulk density could be a simple and useful tool to evaluate the CP, in addition to the others parameters commonly used. At the same time, BDd could be an easy way to infer TOM lost within rejects.

Heavy metal content in rubbish bags used for separate collection of biowaste

The heavy metal content of several rubbish bags used to collect the organic fraction of municipal solid waste (OFMSW) is shown in this paper. Nowadays, several public awareness campaigns carried out by municipalities have promoted rubbish bags based mainly on their appearance, without concern for their heavy metal content. A high amount of heavy metals was detected in some polyethylene bags promoted in different campaigns for OFMSW source-sorted collection, while compostable bags presented low quantities of heavy metals. Some other rubbish bags, as well as commercial bags, were also analysed for comparison. These results should be taken into account before promoting the use of one or other type of bag. Moreover, the rubbish bag manufacturers should reduce the heavy metal content in order to avoid heavy metal scattering in the environment, and also to reduce the consumption of raw materials.

Nitrification during extended co-composting of extreme mixtures of green waste and solid fraction of cattle slurry to obtain growing media

Next generation of waste management systems should apply product-oriented bioconversion processes that produce composts or biofertilisers of desired quality that can be sold in high priced markets such as horticulture. Natural acidification linked to nitrification can be promoted during composting. If nitrification is enhanced, suitable compost in terms of pH can be obtained for use in horticultural substrates. Green waste compost (GW) represents a potential suitable product for use in growing medium mixtures. However its low N provides very limited slow-release nitrogen fertilization for suitable plant growth; and GW should be composted with a complementary N-rich raw material such as the solid fraction of cattle slurry (SFCS). Therefore, it is important to determine how very different or extreme proportions of the two materials in the mixture can limit or otherwise affect the nitrification process. The objectives of this work were two-fold: (a) To assess the changes in chemical and physicochemical parameters during the prolonged composting of extreme mixtures of green waste (GW) and separated cattle slurry (SFCS) and the feasibility of using the composts as growing media. (b) To check for nitrification during composting in two different extreme mixtures of GW and SFCS and to describe the conditions under which this process can be maintained and its consequences. The physical and physicochemical properties of both composts obtained indicated that they were appropriate for use as ingredients in horticultural substrates. The nitrification process occurred in both mixtures in the medium-late thermophilic stage of the composting process. In particular, its feasibility has been demonstrated in the mixtures with a low N content. Nitrification led to the inversion of each mixtures initial pH.

Nitrogen Lost during MSW Composting at Two Facilities in Spain

▪ The objective of this study was to evaluate and compare nitrogen losses during the composting process developed at two facilities. Both are in Catalonia, which is located in northeast Spain. The research evaluated the effects of process, feedstock content, differences in compost maturity and other factors to explain differences in nitrogen levels. Separation methods and leachate problems were also compared.

Education and research related to organic waste management at agricultural engineering schools

Purpose – The purpose of this paper is to describe the experience of the Agriculture Engineering School of Barcelona (ESAB), where undergraduate students were involved in field research experiments on organic waste use in agricultural systems.Design/methodology/approach – The paper outlines how the formation of professionals oriented to work for OWM companies has been successfully promoted.Findings – Agricultural systems can assimilate self‐produced organic wastes (OW) and others from different sources. Their management for crop production can generate enormous economic and environmental benefits which can contribute to sustainable development. The implementation of an integrated strategy for OW treatment (OWT) and management (OWM) must be adapted to the characteristics of the specific geographical region and must consider the interrelations among diverse subjects such as: soil science, fertilizer management, plant production, animal husbandry, farm machinery, climate and culture.Practical implications – ...