Mukesh K. Sharma

Immobilization of acetylcholineesterase-choline oxidase on a gold-platinum bimetallic nanoparticles modified glassy carbon electrode for the sensitive detection of organophosphate pesticides, carbamates and nerve agents.

A novel, highly sensitive amperometric biosensor, based on electrodeposition of gold-platinum bimetallic nanoparticles onto 3-aminopropyltriethoxy silane modified glassy carbon electrode for the detection of paraoxon ethyl, aldicarb, and sarin has been developed. The biosensor consists of acetylcholineesterase (AChE)/choline oxidase (ChOx) immobilized by cross-linking with glutaraldehyde on a modified electrode. The properties of nanoparticles modified electrodes are characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), cyclic voltammograms (CVs) and electrochemical impedance spectroscopy (EIS). The synergistic action of Au and Pt nanoparticles showed excellent electrocatalytic activity with low applied potential for the detection of hydrogen peroxide (H(2)O(2)). The IC(50) and inhibition rate constant (K(i)) values were determined for the inhibitors using immobilized enzymes on modified electrode and the data were compared by spectrophotometric determination of these kinetic parameters using free enzymes in solution. Paraoxon ethyl, sarin, and aldicarb could be detected up to 150-200nM, 40-50nM, and 40-60 microM respectively at 30-40% inhibition level of AChE enzyme and followed linearity in wide range concentration.

Highly Sensitive Amperometric Immunosensor for Detection of Plasmodium falciparum Histidine-Rich Protein 2 in Serum of Humans with Malaria: Comparison with a Commercial Kit

ABSTRACT A disposable amperometric immunosensor was developed for the detection of Plasmodium falciparum histidine-rich protein 2 (PfHRP-2) in the sera of humans with P. falciparum malaria. For this purpose, disposable screen-printed electrodes (SPEs) were modified with multiwall carbon nanotubes (MWCNTs) and Au nanoparticles. The electrodes were characterized by cyclic voltammetry, scanning electron microscopy, and Raman spectroscopy. In order to study the immunosensing performances of modified electrodes, a rabbit anti-PfHRP-2 antibody (as the capturing antibody) was first immobilized on an electrode. Further, the electrode was exposed to a mouse anti-PfHRP-2 antibody from a serum sample (as the revealing antibody), followed by a rabbit anti-mouse immunoglobulin G-alkaline phosphatase conjugate. The immunosensing experiments were performed on bare SPEs, MWCNT-modified SPEs, and Au nanoparticle- and MWCNT-modified SPEs (Nano-Au/MWCNT/SPEs) for the amperometric detection of PfHRP-2 in a solution of 0.1 M diethanolamine buffer, pH 9.8, by applying a potential of 450 mV at the working electrode. Nano-Au/MWCNT/SPEs yielded the highest-level immunosensing performance among the electrodes, with a detection limit of 8 ng/ml. The analytical results of immunosensing experiments with human serum samples were compared with the results of a commercial Paracheck Pf test, as well as the results of microscopy. The specificities, sensitivities, and positive and negative predictive values of the Paracheck Pf and amperometric immunosensors were calculated by taking the microscopy results as the “gold standard.” The Paracheck Pf kit exhibited a sensitivity of 79% (detecting 34 of 43 positive samples; 95% confidence interval [CI], 75 to 86%) and a specificity of 81% (correctly identifying 57 of 70 negative samples; 95% CI, 76 to 92%), whereas the developed amperometric immunosensor showed a sensitivity of 96% (detecting 41 of 43 positive samples; 95% CI, 93 to 98%) and a specificity of 94% (correctly identifying 66 of 70 negative samples; 95% CI, 92 to 99%). The developed method is more sensitive and specific than the Paracheck Pf kit.

Electrochemical immunosensor for botulinum neurotoxin type-E using covalently ordered graphene nanosheets modified electrodes and gold nanoparticles-enzyme conjugate.

In this work, a novel electrochemical immunosensor was developed for the detection of botulinum neurotoxin-E (BoNT/E). This method relied on graphene nanosheets-aryldiazonium salt modified glassy carbon electrodes (GCE) as sensing platform and enzyme induced silver nanoparticles (AgNPs) deposited on gold nanoparticles (AuNPs) as signal amplifier. Herein, a GCE was electrografted with mixed monolayer of phenyl and aminophenyl (Ph-PhNH2/GCE) by diazotization reaction. Further, graphene nanosheets (GNS) were covalently attached on electrode surface (GNS/Ph-PhNH2/GCE). Field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to characterize synthesized graphene oxide and modified electrode surfaces. In the sandwich immunoassay format, the sensitivity was amplified using rabbit anti-mouse IgG-alkaline phosphatase (RαMIgG-ALP) functionalized with gold nanoparticles (RαMIgG-ALP/AuNPs). In order to study the immunosensing performance of GNS/Ph-PhNH2/GCE, first the capturing antibody (rabbit-anti BoNT/E antibody) was covalently immobilized via EDC/NHS chemistry. Further, the electrode was sequentially subjected to sample containing spiked BoNT/E, revealing antibody (mouse-anti BoNT/E) followed by RαMIgG-ALP/AuNPs. 3-indoxyl phosphate (3-IP) was used as substrate which finally reduces the silver ions. The deposited AgNPs on electrode surface were determined by linear sweep voltammetry (LSV). The developed electrochemical immunosensor could detect BoNT/E with linear range from 10pg/ml to 10ng/ml with the minimum detection limit of 5.0pg/ml and total analysis time of 65min. In addition, the immunosensor was successfully evaluated against food samples (orange juice and milk).

A novel piezoelectric immunosensor for the detection of malarial Plasmodium falciparum histidine rich protein-2 antigen

A novel piezoelectric (PZ) immunosensor for the direct detection of malarial Plasmodium falciparum histidine rich protein-2 (PfHRP-2) antigen was developed. The mixed self-assembled monolayers (SAMs) of thioctic acid and 1-dodecanethiol were formed on gold surface of quartz crystal. Cyclic voltammetry, electrochemical impedance spectroscopy and surface Raman spectroscopy techniques were used to characterize the mixed SAMs. The rabbit anti-PfHRP-2 antibodies were coupled on mixed SAM modified gold surface of quartz crystal via NHS/EDC activation method. The PZ immunosensor was applied to detect PfHRP-2 in the linear range of 15-60 ng/ml with a detection limit of 12 ng/ml. It was also found that even after 14 days of storage, 50% of the activity still remained. Clinical human serum samples were tested with this method, and the results were in agreement with those obtained from commercially available ICT kit (NOW(®) Malaria).

An electrochemical genosensor for Salmonella typhi on gold nanoparticles-mercaptosilane modified screen printed electrode.

In this work, we fabricated a system of integrated self-assembled layer of organosilane 3-mercaptopropyltrimethoxy silane (MPTS) on the screen printed electrode (SPE) and electrochemically deposited gold nanoparticle for Salmonella typhi detection employing Vi gene as a molecular marker. Thiolated DNA probe was immobilized on a gold nanoparticle (AuNP) modified SPE for DNA hybridization assay using methylene blue as redox (electroactive) hybridization indicator, and signal was monitored by differential pulse voltammetry (DPV) method. The modified SPE was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and atomic force microscopy (AFM) method. The DNA biosensor showed excellent performances with high sensitivity and good selectivity. The current response was linear with the target sequence concentrations ranging from 1.0 × 10(-11) to 0.5 × 10(-8)M and the detection limit was found to be 50 (± 2.1)pM. The DNA biosensor showed good discrimination ability to the one-base, two-base and three-base mismatched sequences. The fabricated genosensor could also be regenerated easily and reused for three to four times for further hybridization studies.

Electrochemical immunosensor based on bismuth nanocomposite film and cadmium ions functionalized titanium phosphates for the detection of anthrax protective antigen toxin

Bacillus anthracis is a bioterrorism agent classified by the Centers for Disease Control and Prevention (CDC). Herein, a novel electrochemical immunosensor for the sensitive, specific and easy detection of anthrax protective antigen (PA) toxin in picogram concentration was developed. The immunosensor consists of (i) a Nafion-multiwall carbon nanotubes-bismuth nanocomposite film modified glassy carbon electrodes (BiNPs/Nafion-MWCNTs/GCE) as a sensing platform and (ii) titanium phosphate nanoparticles-cadmium ion-mouse anti-PA antibodies (TiP-Cd(2+)-MαPA antibodies) as signal amplification tags. Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), thermogravimmetric analysis (TGA), Fourier transform-infra red spectroscopy (FT-IR), zeta-potential analysis, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to characterize the synthesized TiP nanoparticles and modified electrode surfaces. The immunosensing performance of BiNPs/Nafion-MWCNTs/GCE was evaluated based on sandwich immunoassay protocol. A square wave voltammetry (SWV) scan from -1.2 to -0.3 V in HAc-NaAc buffer solution (pH 4.6) without stripping process was performed to record the electrochemical responses at -0.75 V corresponding to high content of Cd(2+) ions loaded in TiP nanoparticles for the measurement of PA toxin. Under optimal conditions, the currents increased with increasing PA toxin concentrations in spiked human serum samples and showed a linear range from 0.1 ng/ml to 100 ng/ml. The limit of detection of developed immunosensor was found to be 50 pg/ml at S/N=3. The total time of analysis was 35 min.

Application of bimetallic nanoparticles modified screen printed electrode for the detection of organophosphate compounds using an enzyme inhibition approach

A novel, unique gold–platinum bimetallic nanoparticles modified screen printed electrode (SPE) has been developed for the sensitive detection of paraoxon ethyl, carbofuran and simulant of nerve agent diisopropyl fluorophosphate (DFP), based on the enzyme inhibition approach. The gold–platinum nanoparticles were electrochemically deposited on a 3-aminopropyl triethoxy silane modified electrode. Following this acetylcholineesterase (AChE)/choline oxidase (ChOx) bienzymes were immobilized through cross-linking with glutaraldehyde onto a modified electrode. Electrodes were characterized by scanning electron microscopy (SEM), EDX (energy dispersive X-ray analysis) and cyclic voltammetry (CV). The bimetallic alloy nanoparticles have an excellent high surface area and the unique effect of electrocatalytic activity for the oxidation of hydrogen peroxide (H2O2). The IC50 values were determined for the inhibitors using immobilized enzymes on the modified electrode. Paraoxon ethyl, carbofuran, and DFP could be detected up to 0.20 μM, 0.20–0.25 μM, and 0.20–0.25 μM respectively at a 25–30% inhibition level of AChE enzyme (residual enzyme activity) with an incubation time of 10 min.

Ultrasensitive electrochemical immunoassay for surface array protein, a Bacillus anthracis biomarker using Au–Pd nanocrystals loaded on boron-nitride nanosheets as catalytic labels

Bacillus anthracis, the causative agent of anthrax, is a well known bioterrorism agent. The determination of surface array protein (Sap), a unique biomarker for B. anthracis can offer an opportunity for specific detection of B. anthracis in culture broth. In this study, we designed a new catalytic bionanolabel and fabricated a novel electrochemical immunosensor for ultrasensitive detection of B. anthracis Sap antigen. Bimetallic gold-palladium nanoparticles were in-situ grown on poly (diallyldimethylammonium chloride) functionalized boron nitride nanosheets (Au-Pd NPs@BNNSs) and conjugated with the mouse anti-B. anthracis Sap antibodies (Ab2); named Au-Pd NPs@BNNSs/Ab2. The resulting Au-Pd NPs@BNNSs/Ab2 bionanolabel demonstrated high catalytic activity towards reduction of 4-nitrophenol. The sensitivity of the electrochemical immunosensor along with redox cycling of 4-aminophenol to 4-quinoneimine was improved to a great extent. Under optimal conditions, the proposed immunosensor exhibited a wide working range from 5 pg/mL to 100 ng/mL with a minimum detection limit of 1 pg/mL B. anthracis Sap antigen. The practical applicability of the immunosensor was demonstrated by specific detection of Sap secreted by the B. anthracis in culture broth just after 1h of growth. These labels open a new direction for the ultrasensitive detection of different biological warfare agents and their markers in different matrices.

Electrochemical DNA sensor for anthrax toxin activator gene atxA-detection of PCR amplicons

We report the DNA probe functionalized electrochemical genosensor for the detection of Bacillus anthracis, specific towards the regulatory gene atxA. The DNA sensor is fabricated on electrochemically deposited gold nanoparticle on self assembled layer of (3-Mercaptopropyl) trimethoxysilane (MPTS) on GC electrode. DNA hybridization is monitored by differential pulse voltammogram (DPV). The modified GC electrode is characterized by atomic force microscopy (AFM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) method. We also quantified the DNA probe density on electrode surface by the chronocoulometric method. The detection is specific and selective for atxA gene by DNA probe on the electrode surface. No report is available for the detection of B. anthracis by using atxA an anthrax toxin activator gene. In the light of real and complex sample, we have studied the PCR amplicons of 303, 361 and 568 base pairs by using symmetric and asymmetric PCR approaches. The DNA probe of atxA gene efficiently hybridizes with different base pairs of PCR amplicons. The detection limit is found to be 1.0 pM (S/N ratio=3). The results indicate that the DNA sensor is able to detect synthetic target as well as PCR amplicons of different base pairs.

Controllable gold nanoparticle deposition on carbon nanotubes and their application in immunosensing

A CNT–AuNPs hybrid nanocomposite platform was prepared from nanodisperse AuNPs in N-[3-(trimethoxysilyl)propyl]ethylenediamine (EDAS) sol–gel matrices with purified MWCNT. EDAS, an amine group-containing sol–gel solution, was utilized for its ability to stabilize the nanoparticles in solution. The developed model system was based on immobilized rabbit anti-mouse IgG-HRP (horseradish peroxidase) for reagentless detection of mouse IgG. The immunosensing platform was prepared by using Nafion for the immobilization of rabbit anti-mouse IgG-HRP and CNT–AuNPs hybrid nanocomposite on a glassy carbon electrode used for the detection of mouse IgG which provides a biocompatible microenvironment. The resulting CNT–AuNPs nanocomposite brings new capabilities for electrochemical devices by using the synergistic action of its electrocatalytic activity. The CNT–AuNPs were characterized using SEM, TEM, EIS, and AFM, and the analytical performance was monitored by differential pulse voltammetry. The detection limit of mouse IgG is 0.5 ng mL−1 (S/N ratio = 3). In addition, the immunosensor efficiently allowed a specific electrochemical analysis of mouse IgG and easy discrimination of goat IgG, chicken IgG, and rabbit IgG.