Munehiro Kubota

Selective adsorption of bacterial cells onto zeolites

Zeolites adsorb microbial cells on their surfaces and selective adsorption for specific microorganisms was seen with certain zeolites. Tests for the adsorption ability of zeolites were conducted using various established microbial cell lines. Specific cell lines were shown to selectively absorb to certain zeolites, species to species. In order to understand the selectivity of adsorption, we tested adsorption under various pH conditions and determined the zeta-potentials of zeolites and cells. The adsorption of some cell lines depended on the pH, and some microorganisms were preferentially adsorbed at acidic pH. The values of zeta-potentials were used for calculating the electric double layer interaction energy between zeolites and microbial cells. There was a correlation between the experimental adsorption results and the interaction energy. Moreover, we evaluated the surface hydrophobicity of bacterial cells by using the microbial adherence to hydrocarbon (MATH) assay. In addition, we also applied this method for zeolites to quantify relative surface hydrophobicity. As a result, we found a correlation between the adsorption results and the hydrophobicity of bacterial cells and zeolites. These results suggested that adsorption could be explained mainly by electric double layer interactions and hydrophobic interactions. Finally, by using the zeolites Na-BEA and H-Y, we succeeded in clearly separating three representative microbes from a mixture of Escherichia coli, Bacillus subtilis and Staphylococcus aureus. Zeolites could adsorb each of the bacterial cell species with high selectivity even from a mixed suspension. Zeolites can therefore be used as effective carrier materials to provide an easy, rapid and accurate method for cell separation.

Formation and structure of Langmuir–Blodgett films of organo-modified aluminosilicate with high surface coverage

We have developed an effective organo-modification method at the organic solvent/distilled water interface of natural aluminosilicate clay surfaces. We also investigated the molecular arrangement of organo-modified aluminosilicate with high surface coverage in Langmuir-Blodgett films (LB) by performing out-of-plane and in-plane X-ray diffraction (XRD) measurements. In addition, the surface morphology of mixed monolayers of organo-modified aluminosilicate and several biodegradable polymers (e.g., poly(L-lactide), PLLA) was also characterized by atomic force microscopy (AFM). The in-plane XRD results of multilayers of organo-modified aluminosilicate formed by the LB method indicate the formation of a two-dimensional lattice of hydrocarbons on the aluminosilicate surface. These hydrocarbons of organo-modified reagents packed hexagonal or orthorhombic in films. Based on our experimental findings, the LB technique enabled the formation of a densely packed organo-modified aluminosilicate monolayer at the water surface. Furthermore, for mixed monolayer systems comprising an organo-modified clay with high surface coverage and biodegradable polymers, a miscible surface was observed by AFM on a mesoscopic scale, whereas those with low surface coverage formed phase-separated structures.

Heterogeneous Nucleation of Protein Crystals on Fluorinated Layered Silicate

Here, we describe an improved system for protein crystallization based on heterogeneous nucleation using fluorinated layered silicate. In addition, we also investigated the mechanism of nucleation on the silicate surface. Crystallization of lysozyme using silicates with different chemical compositions indicated that fluorosilicates promoted nucleation whereas the silicates without fluorine did not. The use of synthesized saponites for lysozyme crystallization confirmed that the substitution of hydroxyl groups contained in the lamellae structure for fluorine atoms is responsible for the nucleation-inducing property of the nucleant. Crystallization of twelve proteins with a wide range of pI values revealed that the nucleation promoting effect of the saponites tended to increase with increased substitution rate. Furthermore, the saponite with the highest fluorine content promoted nucleation in all the test proteins regardless of their overall net charge. Adsorption experiments of proteins on the saponites confirmed that the density of adsorbed molecules increased according to the substitution rate, thereby explaining the heterogeneous nucleation on the silicate surface.

Cell Adsorption and Selective Desorption for Separation of Microbial Cells by Using Chitosan-Immobilized Silica

ABSTRACT Cell adsorption and selective desorption for separation of microbial cells were conducted by using chitosan-immobilized silica (CIS). When chitosan was immobilized onto silica surfaces with glutaraldehyde, bacterial cells adsorbed well and retained viability. Testing of the adsorption and desorption ability of CIS using various microbes such as Escherichia coli, Aeromonas hydrophila, Pseudomonas aeruginosa, Bacillus subtilis, Micrococcus luteus, Staphylococcus aureus, Staphylococcus epidermidis, Lactobacillus casei, Streptococcus mutans, Streptococcus sobrinus, Streptococcus salivarius, Saccharomyces cerevisiae, Saccharomyces ludwigii, and Schizosaccharomyces pombe revealed that most microbes could be adsorbed and selectively desorbed under different conditions. In particular, recovery was improved when l-cysteine was added. A mixture of two bacterial strains adsorbed onto CIS could also be successfully separated by use of specific solutions for each strain. Most of the desorbed cells were alive. Thus, quantitative and selective fractionation of cells is readily achievable by employing chitosan, a known antibacterial material.