Mustafa Germec

Ultrasound-assisted dilute acid hydrolysis of tea processing waste for production of fermentable sugar.

Lignocellulosic materials that are the most abundant plant biomass in the world have the potential to become sustainable sources of the produced value added products. Tea processing waste (TPW) is a good lignocellulosic source to produce the value added products from fermentable sugars (FSs). Therefore, the present study is undertaken to produce FSs by using ultrasound‐assisted dilute acid (UADA) and dilute acid (DA) hydrolysis of TPW followed by enzymatic hydrolysis. UADA hydrolysis of TPW was optimized by response surface methodology (RSM) at maximum power (900 W) for 2 h. The optimum conditions were determined as 50°C, 1:6 (w/v) solid:liquid ratio, and 1% (w/v) DA concentration, which yielded 20.34 g/L FS concentration. Furthermore, its DA hydrolysis was also optimized by using RSM for comparison and the optimized conditions were found as 120°C, 1:8 solid:liquid ratio, and 1% acid concentration, which produced 25.3 g/L FS yield. Even though the produced sugars with UADA hydrolysis are slightly less, but it can provide significant cost saving due to the lower temperature requirement and less liquid consumption. Besides, enzymatic hydrolysis applied after pretreatments of TPW were very more economic than the conventional enzymatic hydrolysis in the literature due to shorter time requiring. In conclusion, ultrasound‐assisted is a promising technology that can be successfully applied for hydrolysis of biomass and can be an alternative to the other hydrolysis procedures and also TPW can be considered as suitable carbon source for the production of value‐added products like biofuels, organic acids, and polysaccharides.

Ethanol production from rice hull using Pichia stipitis and optimization of acid pretreatment and detoxification processes

The goal of this study was to produce ethanol from rice hull hydrolysates (RHHs) using Pichia stipitis strains and to optimize dilute acid hydrolysis and detoxification processes by response surface methodology (RSM). The optimized conditions were found as 127.14°C, solid:liquid ratio of 1:10.44 (w/v), acid ratio of 2.52% (w/v), and hydrolysis time of 22.01 min. At these conditions, the fermentable sugar concentration was 21.87 g/L. Additionally, the nondetoxified RHH at optimized conditions contained 865.2 mg/L phenolics, 24.06 g/L fermentable sugar, no hydroxymethylfurfural (HMF), 1.62 g/L acetate, 0.36 g/L lactate, 1.89 g/L glucose, and 13.49 g/L fructose + xylose. Furthermore, RHH was detoxified with various methods and the best procedures were found to be neutralization with CaO or charcoal treatment in terms of the reduction of inhibitory compounds as compared to nondetoxified RHH. After detoxification procedures, the content of hydrolysates consisted of 557.2 and 203.1 mg/L phenolics, 19.7 and 21.60 g/L fermentable sugar, no HMF, 0.98 and 1.39 g/L acetate, 0 and 0.04 g/L lactate, 1.13 and 1.03 g/L glucose, and 8.46 and 12.09 g/L fructose + xylose, respectively. Moreover, the base‐line mediums (control), and nondetoxified and detoxified hydrolysates were used to produce ethanol by using P. stipitis strains. The highest yields except that of base‐line mediums were achieved using neutralization (35.69 and 38.33% by P. stipitis ATCC 58784 and ATCC 58785, respectively) and charcoal (37.55% by P. stipitis ATCC 58785) detoxification methods. Results showed that the rice hull can be utilized as a good feedstock for ethanol production using P. stipitis.

Ethanol production in a biofilm reactor with non-sterile carob extract media and its modeling

ABSTRACT Modeling is gain importance to knowledge about kinetic-metabolic nature of fermentations. In this study, Modified Richards Model (MRM) was applied to model ethanol fermentation in a biofilm reactor with non-sterile carob extract (NSCE). Results indicated that MRM showed its generality to fit cell growth, ethanol production, and sugar consumption curves in non-sterile enriched (NSE) and non-sterile non-enriched (NSNE) media. For NSE medium, MRM successfully predicted the biomass and ethanol production and sugar consumption. Nonetheless, MRM victoriously forecasted all sigmoid curves related to fermentation of NSNE medium. Consequently, MRM predictions satisfactorily fitted the experimental data based on the model evaluation results.

Optimization of ultrasound-assisted dilute acid hydrolysis conditions of tea processing waste

Abstract. Lignocellulosic materials that are the most abundant plant biomass in the world have the potential to become sustainable sources of the produced value added products. Tea processing waste (TPW) is a good lignocellulosic source to produce the value added products from fermentable sugars. Therefore, the present study is undertaken to produce fermentable sugars by using ultrasound-assisted dilute acid hydrolysis of TPW followed by enzymatic hydrolysis. Furthermore, optimization of ultrasound-assisted dilute sulfuric acid (UADA) hydrolysis conditions of TPW was performed by response surface method at maximum power (900 W) for 2 h. Optimized conditions were 50°C, 1:6 (w/v) solid: liquid ratio, and 1% (w/v) dilute acid ratio, which yielded as 20.34 g/L fermentable sugar concentration. In conclusion, ultrasound-assisted dilute acid hydrolysis can be successfully applied for hydrolysis of TPW, which is a favorable carbon source for numerous value-added product productions via microbial fermentation.