Myung-Sik Park

Management of periprosthetic femoral fractures

We followed up 37 periprosthetic fractures to assess the factors related to the outcomes and the loosening of prostheses. The average union time is 3.1 months (range, 2-6.2 months). The most common types were fractures around the stem tip and displaced (89.1%). In our study, the loosening rate (32.4%) was low compared with other reports. These might be due to the cementless stem, but the difference was not significant (P>.05). After management of the fracture with a plate, we noted 5 complications: 2 nonunion and 3 refractures. The causes of these complications were related to screw in the level of the stem tip. Therefore, in the management of fractures with plates, we do not recommend using a screw in the area of the stem tip but rather using a cerclage proximally and bone graft. If stem was unstable or stability was uncertain, and the arthroplasty did not function well previously, revision with a distal fluted stem showed an early bony union.

Management of Periprosthetic Femur Fractures Treated With Distal Fixation Using a Modular Femoral Stem Using an Anterolateral Approach

The authors retrospectively analyzed 27 hips with periprosthetic femoral fractures (types B2 and B3) treated with distal fixation using a modular, fluted, femoral stem. The average follow-up was 4.8 years. Most fractures (25 hips) were united (92.6%), and mean Harris Hip Score at follow-up was 84.7. Subsidence was noted in 2 patients within 6 months postoperatively, but despite the subsidence, one achieved union. One patient developed peroneal nerve palsy. Two hips were defined as failure: one nonunion associated with infection, and the other one had 10 mm more subsidence. No dislocation occurred in any of the patients. This technique has proven to be reliable in the treatment of difficult fractures in the acute stage, although concerns regarding the subsidence remain when using this femoral stem.

Plasma spray-coated Ti femoral component for cementless total hip arthroplasty

A retrospective study of the clinical and radiographic results of Mallory Head total hip arthroplasties in 67 patients (76 hips) with a mean age of 50.1 years was undertaken. The mean follow-up period was 10.1 years (9-13years). In this study, excellent or good clinical results were found for 64 patients. Minimal thigh pain was found in 3 patients (4.4%). Seventy-one hips (93.4%) showed fixation by bony ingrowth and 3 (3.9%) showed stable fibrous fixation. Bony ongrowth and ingrowth were also seen in 16 hips (21%) at distal smooth and grit-blast areas. Two femoral components were revised (survival rate, 97.3%), one for subsidence and other for recurrent infection. We believe that these good results were caused by excellent bony ingrowth on the proximal two thirds of the femoral surface area. In conclusion, proximal plasma-spray coating and the tapered shape of the Ti stem showed excellent bony ingrowth and initial stability. Our results indicate that the tapered shape will be an important element in the design of a cementless Ti stem.

A Distal Fluted, Proximal Modular Femoral Prosthesis in Revision Hip Arthroplasty

Most reports on the use of modular femoral stems during revision surgery have involved short follow-up periods. The authors evaluated the clinical and radiographic performance of 59 patients fitted with a distal fix modular stem. The average follow-up period was 8.2 years. Average Harris hip score was improved from 47 to 87.6. Of 19 patients with trochanteric osteotomy, 4 had a displaced greater trochanter. Re-revision was performed in 5 patients, and 3 of these were for subsidence (of these 3, subsidence was associated with dissociation of the coupling part in 1 and with osteotomy nonunion in other 2 [proximal component only]). Modular distally fixed femoral stems were found to offer intraoperative flexibility, but to suffer from subsidence and intraoperative greater trochanter and metaphyseal femoral fractures.

Internal fixation of femoral head fractures (Pipkin I) using hip arthroscopy.

AbstractA hip arthroscopy technique for the reduction and internal fixation of a displaced femoral head fracture is presented. Open treatment is often required for femoral head fractures. However, it is shown below how large fragments of a femoral head fracture-dislocation were reduced and internally fixated using hip arthroscopy. This was performed in the supine position using skeletal traction. The accessory distal anterior portal was used for internal fixation when a hip was positioned in abduction with external rotation. A satisfactory outcome was reported. Recovery was immediate and cosmetics were excellent. We conclude that hip arthroscopy is a valuable option for managing femoral head fracture-dislocations (Pipkin I). Level of evidence V.

Hip Arthroscopic Management for Femoral Head Fractures and Posterior Acetabular Wall Fractures (Pipkin Type IV)

Femoral head fractures associated with acetabular fractures are usually treated by an open method. After a closed reduction of a hip dislocation, open reduction and internal fixation of acetabular fractures usually depend on the type of acetabular fracture. Acetabular fractures associated with femoral head fractures, torn labrums, or osteochondral fractures are often managed simultaneously by a posterior approach. The patient in this study was referred to us because of pain and limited motion after open reduction and internal fixation of an acetabular fracture. Postoperative computed tomography showed remnant osteochondral fragments located in the cotyloid fossa. Using hip arthroscopy, we found a torn labrum and multiple osteochondral fragments in the cotyloid fossa. The avulsed torn labrum was reattached with 2 anchors through the midanterior portal. Osteochondral fragments were curetted and removed. This article reviews the treatment of the torn labrum and multiple fragments after acetabular fracture reduction. The patient recovered immediately and had a satisfactory outcome. We conclude that hip arthroscopy is a valuable option for treating femoral head fracture dislocations associated with acetabular fractures.

Arthroscopic reduction and internal fixation of femoral head fractures.

Summary: Displaced femoral head fractures often require open reduction and internal fixation. This article describes 3 cases of displaced large-fragment femoral head fractures (OTA 31-C1.3) that were treated by arthroscopic reduction and internal fixation, which was accomplished using an anterolateral viewing portal, an anterior portal, and an accessory distal anterior working portal. By 3 months postoperatively, all 3 patients had returned to full function. Therefore, we conclude that an arthroscopic approach results in stable fixation and early joint motion, thereby effectively treating displaced femoral head fractures in a minimally invasive manner.

The management of the displaced medial wall in complex acetabular fractures using plates and additional cerclage.

Reduction for displaced quadrilateral plates in complicated acetabular fractures is difficult and requires wide exposure. The purpose of this study is to assess the usefulness of the additional cable in this complicated fracture and to evaluate the potential danger of compressing the superior gluteal artery and nerve with cable application. We evaluated 31 hips (these included 25 hips with fractures of both columns, two posterior wall and column fractures, three anterior column and posterior hemitransverse fractures, and one high T-shaped fracture) with an average six-year follow-up. Clinical outcomes were evaluated using a modification of the Matta grading system and radiographic arthritic grades. We assessed the postoperative clinical outcomes in relation with other variables such as anatomical reduction, delayed operation, seagull sign, and femoral head injuries. We determined whether the superior gluteal artery and nerve were compressed by cerclage with the help of femoral angiography and EMG. Clinical outcomes were graded as very good to excellent for 18 patients, good for five, fair for three and poor for five. Pre-Operative femoral head injury (P = 0.011), a seagull sign (P = 0.001), poor reduction (P = 0.015), and delayed reduction (P = 0.05) were found to statistically influence clinical results. We found that there were no injuries to the superior gluteal artery and nerve in spite of using a cable. Cerclage methods can be useful for initial reduction of displaced medial plates in acetabular fractures. These methods reduce operation time and blood loss as compared with other methods.

Ischemic Optic Neuropathy After Hemiarthroplasty for Femoral Neck Fracture

Ischemic optic neuropathy due to hemorrhaging remote from visual pathway can occur after surgery. This complication is usually associated with a chronic bleeding disorder, such as gastrointestinal hemorrhage, diabetes, arteriosclerosis, and/or metal poisoning. There are many complications related to cemented hemiarthroplasty in patients who have a femoral neck fracture, such as dislocation, infection, leg length discrepancy, peroneal nerve palsy, and embolism. However, visual loss after this procedure has not previously been reported. In the case reported here, the operation time was short, and there was no massive hemorrhaging. Unilateral visual loss occurred within 3 days of an apparently safe and simple unilateral hemiarthroplasty of the hip.

Outcomes of polyethylene liner cementation into a fixed metal acetabular shell with minimum follow-up of 7 years

Cementation of a polyethylene liner into the well-fixed shell is a convenient option for revision total hip arthroplasty. We retrospectively reviewed 45 patients who had liner cementation to investigate the risk factors which gave rise to major complications and reoperation. Patients were observed for a minimum of 7 years (range 7.8-14 years). Relevant risk factors (age, BMI, surgical approach, previous cup size and position, types of coated surface) were assessed with Cox regression analysis. The mean Harris Hip Score was improved from 62.5 (range 57-68) preoperatively to 87.1 (range 70-97). A total of 7 hips (15.5%) had acetabular component loosening that was treated with reoperation. Prevalence of acetabular component loosening was statistically significantly higher in hydroxyapatite-coated group (5 of 13) than in the Ti-coated group (2 of 32, p = 0.015). All recurrent dislocations occurred in patients treated with a posterior approach. Diameter of the previous metal shell of below 54 mm showed a lower 10-year survival rate than those greater than 54 mm in diameter. PE liner cementation in stable metal cup is a useful alternative option for carefully selected patients. Pre-existing HA-coated cups as well as small sized cups were indicative of poor outcomes.