N.B. Alexander

The Science and Technologies for Fusion Energy With Lasers and Direct-Drive Targets

We are carrying out a multidisciplinary multi-institutional program to develop the scientific and technical basis for inertial fusion energy (IFE) based on laser drivers and direct-drive targets. The key components are developed as an integrated system, linking the science, technology, and final application of a 1000-MWe pure-fusion power plant. The science and technologies developed here are flexible enough to be applied to other size systems. The scientific justification for this work is a family of target designs (simulations) that show that direct drive has the potential to provide the high gains needed for a pure-fusion power plant. Two competing lasers are under development: the diode-pumped solid-state laser (DPPSL) and the electron-beam-pumped krypton fluoride (KrF) gas laser. This paper will present the current state of the art in the target designs and lasers, as well as the other IFE technologies required for energy, including final optics (grazing incidence and dielectrics), chambers, and target fabrication, injection, and tracking technologies. All of these are applicable to both laser systems and to other laser IFE-based concepts. However, in some of the higher performance target designs, the DPPSL will require more energy to reach the same yield as with the KrF laser.

Direct drive target survival during injection in an inertial fusion energy power plant

In inertial fusion energy (IFE) power plant designs, the fuel is a spherical layer of frozen DT contained in a target that is injected at high velocity into the reaction chamber. For direct drive, typically laser beams converge at the centre of the chamber (CC) to compress and heat the target to fusion conditions. To obtain the maximum energy yield from the fusion reaction, the frozen DT layer must be at about 18.5 K and the target must maintain a high degree of spherical symmetry and surface smoothness when it reaches the CC. During its transit in the chamber the cryogenic target is heated by radiation from the hot chamber wall. The target is also heated by convection as it passes through the rarefied fill-gas used to control chamber wall damage by x-rays and debris from the target explosion. This article addresses the temperature limits at the target surface beyond which target uniformity may be damaged. It concentrates on direct drive targets because fuel warm up during injection is not currently thought to be an issue for present indirect drive designs and chamber concepts. Detailed results of parametric radiative and convective heating calculations are presented for direct-drive targets during injection into a dry-wall reaction chamber. The baseline approach to target survival utilizes highly reflective targets along with a substantially lower chamber wall temperature and fill-gas pressure than previously assumed. Recently developed high-Z material coatings with high heat reflectivity are discussed and characterized. The article also presents alternate target protection methods that could be developed if targets with inherent survival features cannot be obtained within a reasonable time span.

Laser targets compensate for limitations in inertial confinement fusion drivers

Success in inertial confinement fusion (ICF) requires sophisticated, characterized targets. The increasing fidelity of three-dimensional (3D), radiation hydrodynamic computer codes has made it possible to design targets for ICF which can compensate for limitations in the existing single shot laser and Z pinch ICF drivers. Developments in ICF target fabrication technology allow more esoteric target designs to be fabricated. At present, requirements require new deterministic nano-material fabrication on micro scale.

A cost-effective target supply for inertial fusion energy

A central feature of an inertial fusion energy (IFE) power plant is a target that has been compressed and heated to fusion conditions by the energy input of the driver. This is true whether the driver is a laser system, heavy ion beams or Z-pinch system. The IFE target fabrication, injection and tracking programmes are focusing on methods that will scale to mass production. We are working closely with target designers, and power plant systems specialists, to make specifications and material selections that will satisfy a wide range of required and desirable target characteristics. One-of-a-kind capsules produced for today’s inertial confinement fusion experiments are estimated to cost about US

Challenges Surrounding the Injection and Arrival of Targets at LIFE Fusion Chamber Center

2500 each. Design studies of cost-effective power production from laser and heavy-ion driven IFE have suggested a cost goal of about

Demonstrating a Target Supply for Inertial Fusion Energy

0.25–0.30 for each injected target (corresponding to ∼10% of the ‘electricity value’ in a target). While a four orders of magnitude cost reduction may seem at first to be nearly impossible, there are many factors that suggest this is achievable. This paper summarizes the design, specifications, requirements and proposed manufacturing processes for the future for laser fusion, heavy ion fusion and Z-pinch driven targets. These target manufacturing processes have been developed—and are proposed—based on the unique materials science and technology programmes that are ongoing for each of the target concepts. We describe the paradigm shifts in target manufacturing methodologies that will be needed to achieve orders of magnitude reductions in target costs, and summarize the results of ‘nth-of-a-kind’ plant layouts and cost estimates for future IFE power plant fuelling. These engineering studies estimate the cost of the target supply in a fusion economy, and show that costs are within the range of commercial feasibility for electricity production.

A CONTINUOUS, IN-CHAMBER TARGET TRACKING AND ENGAGEMENT APPROACH FOR LASER FUSION

Abstract IFE target designers must consider several engineering requirements in addition to the physics requirements for successful target implosion. These considerations include low target cost, high manufacturing throughput, the ability of the target to survive the injection into the fusion chamber and arrive in a condition and physical position consistent with proper laser-target interaction and ease of post-implosion debris removal. This article briefly describes these considerations for the Laser Inertial Fusion-based Energy (LIFE) targets currently being designed.

TARGET TRACKING AND ENGAGEMENT FOR INERTIAL FUSION ENERGY - A TABLETOP DEMONSTRATION -

Abstract A central feature of an Inertial Fusion Energy (IFE) power plant is a target that has been compressed and heated to fusion conditions by the energy input of the driver. The technology to economically manufacture and then position cryogenic targets at chamber center is at the heart of future IFE power plants. For direct drive IFE (laser fusion), energy is applied directly to the surface of a spherical CH polymer capsule containing the deuterium-tritium (DT) fusion fuel at approximately 18K. For indirect drive (heavy ion fusion, HIF), the target consists of a similar fuel capsule within a cylindrical metal container or ’’hohlraum’’ which converts the incident driver energy into x-rays to implode the capsule. For either target, it must be accurately delivered to the target chamber center at a rate of about 5-10Hz, with a precisely predicted target location. Future successful fabrication and injection systems must operate at the low cost required for energy production (about

Developing a commercial production process for 500 000 targets per day : A key challenge for inertial fusion energy

0.25/target, about 104 less than current costs). Z-pinch driven IFE (ZFE) utilizes high current pulses to compress plasma to produce x-rays that indirectly heat a fusion capsule. ZFE target technologies utilize a repetition rate of about 0.1 Hz with a higher yield. This paper provides an overview of the proposed target methodologies for laser fusion, HIF, and ZFE, and summarizes advances in the unique materials science and technology development programs.

Experimental Target Injection and Tracking System

Abstract Target engagement is the process of measuring the target trajectory and directing the driver beams to hit the target at a position that is predicted based on these measurements. New target engagement concepts have been proposed in the last few years to continuously track the targets and to verify that the tracking system is aligned with the driver beams for each shot. For transverse position, a laser beam continuously backlights the target and the position of the Poisson spot in the center of the target’s shadow is measured. Axial target displacement is measured using a laser interferometer and counting interference fringes as the target moves away from the laser source. Final steering corrections use a “glint” reflected off the target ˜1 ms prior to firing the laser beams and collected in a separate Position Sensitive Detector (PSD) for each driver beamlet. The position of the glint on the PSD is compared to the position of an alignment beam that is collinear with the driver beam. Steering corrections are then made based on the difference in position of the two spots reaching the PSD.