Nagaraju Swamy

Redox-Reaction Based Spectrophotometric Assay of Isoniazid in Pharmaceuticals

Two spectrophotometric methods are described for the determination of isoniazid (INH) in pharmaceuticals. In the first method (FCR method), INH is reacted with Folin-Ciocalteu reagent in Na2CO3 medium and the resulting blue colored chromogen measured at 760 nm. Iron(II), formed as a result of reaction between INH and iron(III), is made to react with ferricyanide, and the resulting Prussian blue is measured at 760 nm, basing the second method (FFC method). The conditions for better performance are optimized. Beer’s law is obeyed in the concentration ranges 0.5–10 and 0.2–3.0 μg mL−1 for FCR method and FFC methods, respectively, with corresponding molar absorptivity values of and L mol−1 cm−1. The methods are validated for accuracy, precision, LOD, LOQ, robustness, and ruggedness as per the current ICH guidelines. The validated methods were successfully applied to quantify INH in its commercial formulation with satisfactory results; hence the methods are suitable for isoniazid determination in bulk drugs and pharmaceuticals.

Quality by design approach for the development and validation of glipizide, an antidiabetic drug, by RP-UPLC with application to formulated forms and urine.

Quality by design (QbD) refers to the achievement of certain predictable quality with desired and predetermined specifications. The objective of this study was to develop and demonstrate an integrated multivariate approach to develop and quantify the constituent concentrations of glipizide (GPZ) drug in its pure and tablet forms. The method was developed using Zorbax Extend C-18 (50 mm × 4.6 mm × 1.8 μm) column with mobile phase consisting of a mixture of phosphate buffer of pH 3.5 and acetonitrile (60 : 40 v/v). The method fulfilled validation criteria and was shown to be sensitive, with limits of detection (LOD) and quantitation (LOQ) of 0.001 and 0.005 μg mL−1, respectively. The percentage relative standard deviations for robustness and ruggedness were observed within the range of 0.1 and 0.99. The calibration graph was linear in the range of 0.005–300 μg mL−1. The applicability of the method was shown by the analysis of formulated drug and spiked urine samples. The proposed method can be used for routine analysis in quality control laboratories for its bulk and formulated product, and this is the first UPLC method reported for the assay of GPZ in bulk, formulated form and urine.

Titrimetric and spectrophotometric assay of diethylcarbamazine citrate in formulations using iodate and iodide mixture as reagents

One titrimetric and two spectrophotometric methods are proposed for the determination of diethylcarbamazine citrate (DEC) in bulk drug and in formulations using potassium iodate and potassium iodide as reagent. The methods employ the well-known analytical reaction between iodate and iodide in the presence of acid. In titrimetry (method A), the drug was treated with a measured excess of thiosulfate in the presence of unmeasured excess of iodate-iodide mixture and after a standing time of 10 min, the surplus thiosulfate was determined by back titration with iodine towards starch end point. Titrimetric assay is based on a 1:3 reaction stoichiometry between DEC and iodine and the method is applicable over 2.0-10.0 mg range. The liberated iodine is measured spectrophotometrically at 370 nm (method B) or the iodine-starch complex measured at 570 nm (method C). In both methods, the absorbance is found to be linearly dependent on the concentration of iodine, which in turn is related to DEC concentration. The calibration curves are linear over 2.5-50 and 2.5-30 µg mL-1 DEC for method B and method C, respectively. The calculated molar absorptivity and Sandell sensitivity values were 6.48×103 L mol-1 cm-1 and 0.0604 µg cm-2, respectively, for method B, and their respective values for method C are 9.96×103 L mol-1 cm-1 and 0.0393 µg cm-2. The intra-day and inter-day accuracy and precision studies were carried out according to the ICH guidelines. The methods were successfully applied to the analysis of DEC formulations.

Simple and rapid spectrophotometric assay of albendazole in pharmaceuticals using iodine and picric acid as CT complexing agents

Two simple, rapid and inexpensive spectrophotometric methods are described for the determination of albendazole (ALB) in bulk drug and in tablets. The methods are based on charge-transfer (CT) complexation reaction involving ALB as n-donor and iodine as σ-acceptor (method A) in dichloromethane or picric acid (PA) as π-acceptor (method B) in chloroform. The absorbance of CT complexes was measured at 380 nm for method A, and 415 nm for method B. The optimization of the experimental conditions is described. Under optimum conditions, Beers law obeyed over the concentration ranges 8.0-240 and 2.4-42 μg mL-1 for method A and method B, respectively. The apparent molar absorptivity of CT complexes at the respective λmax are calculated to be 1.17×103 and 5.22×103 L mol-1 cm-1 respectively, and the corresponding Sandell sensitivity values are 0.2273 and 0.0509 ng cm-2. The limits of detection (LOD) and quantification (LOQ) are calculated to be (0.69 and 2.08), and (0.10 and 0.30) μg mL-1 with method A, and method B, respectively. The intra-day and inter-day accuracy expressed as % RE and precision expressed as % RSD were less than 3%. The methods were applied to the determination of ALB in tablets.

Use of Two Sulfonphthalein Dyes for the Sensitive and Selective Extraction-Free Spectrophotometric Assay of Albendazole in Bulk Drug and in Tablets

1.27 × 10 4 Lm ol −1 cm −1 and 0.0209 ng cm −2 ,a nd7.57 × 10 3 Lm ol −1 cm −1 and 0.0350 ng cm −2 using BPB and BTB, respectively. The limits of detection and quantification were calculated to be 0.01 and 0.03, and 0.16, and 0.49 �� gm L −1 using BPB and BTB, respectively. The relative standard values for intra-day and inter-day precision were less than 3%, and the accuracy was better than 3% for both methods.

SIMPLE AND SELECTIVE SPECTROPHOTOMETRIC ASSAY OF DIETHYLCARBAMAZINE CITRATE USING 2,3-DICHLORO-5,6-DICYANO-p-BENZOQUINONE AND 2,4-DINITRO PHENOL

Two simple, rapid and inexpensive spectrophotometric methods are described for the determination of diethylcarbamazine citrate (DEC) in bulk drug and formulations. The methods are based on the charge–transfer (CT) complexation reaction involving DEC as the n- donor and 2,3-dichloro-5,6-dicyano-p-benzoquinone [DDQ] (method A) and 2,4-dinitro phenol [DNP] (method B) as π-acceptors in chloroform. The absorbance of CT complexes was measured at 480 nm for method A, and 420 nm for method B. Under optimum conditions, Beer’s law was obeyed over the concentration ranges 4-90 and 4-100 μg mL-1 for methods A and B, respectively.