Naofumi Kobayashi

Microfluidic White Organic Light-Emitting Diode Based on Integrated Patterns of Greenish-Blue and Yellow Solvent-Free Liquid Emitters.

We demonstrated a novel microfluidic white organic light-emitting diode (microfluidic WOLED) based on integrated sub-100-μm-wide microchannels. Single-μm-thick SU-8-based microchannels, which were sandwiched between indium tin oxide (ITO) anode and cathode pairs, were fabricated by photolithography and heterogeneous bonding technologies. 1-Pyrenebutyric acid 2-ethylhexyl ester (PLQ) was used as a solvent-free greenish-blue liquid emitter, while 2,8-di-tert-butyl-5,11-bis(4-tert-butylphenyl)-6,12-diphenyltetracene (TBRb)-doped PLQ was applied as a yellow liquid emitter. In order to form the liquid white light-emitting layer, the greenish-blue and yellow liquid emitters were alternately injected into the integrated microchannels. The fabricated electro-microfluidic device successfully exhibited white electroluminescence (EL) emission via simultaneous greenish-blue and yellow emissions under an applied voltage of 100 V. A white emission with Commission Internationale de l’Declairage (CIE) color coordinates of (0.40, 0.42) was also obtained; the emission corresponds to warm-white light. The proposed device has potential applications in subpixels of liquid-based microdisplays and for lighting.

Relation between hematocrit and optical density in pulse oximetry -In vitro study with Waseda mock circulatory system-

Optical properties of living tissues have not been well established even today, and biooptic instrumentations have to be based on empirical formulae. In order to examine optical properties of the tissue having pulsating blood perfusion, we investigated the relation between optical density (defined as O.D.) of whole blood and hematocrit by transmission spectrophotometry. We used Waseda mock circulatory system that simulates blood circulation in the tissue. It was found that with increasing light path length, O.D. per unit light path length due to scattering and absorption effect, tended to become constant in each hematocrit. For wavelengths of 660, 805 and 940 nm, the relations between O.D. of whole blood and hematocrit predicted by Twerskys equation, Loewingers equation and photon diffusion equation fitted to the data obtained. Meanwhile, for 1300 nm, the relation predicted by Loewingers equation gave the best fit to the data

Development of a compact mock circulation system and a new flow-cell model for pulse spectrophotometry

We have developed an extremely compact mock circulation system. This system can simulate artery blood circulation and generate a pulse wave with a very small amount of blood. We were also able to measure the in vitro pulsatile optical density ratio (Φvt) using this system with a flow cell [1]. Results showed a difference between Φvt and the in vivo pulsatile optical density ratio (Φvi) for the same oxygen saturations. To explain this difference, we proposed a new flow-cell model that includes venous flow and arterial flow. Because these systems can simulate the in vivo environment with very accurately, they can be applied to various pulse spectrophotometry studies. Moreover, the required blood volume is very small so the system can evaluate artificial blood or artificial red cells at very low cost. Thus, this system can reduce the time and cost of developing new pulse photometry techniques and other medical equipment.

Clinical contributions of exhaled volatile organic compounds in the diagnosis of lung cancer

Background Exhaled volatile organic compounds (VOC) are being considered as biomarkers for various lungs diseases, including cancer. However, the accurate measurement of extremely low concentrations of VOC in expired air is technically challenging. We evaluated the clinical contribution of exhaled VOC measured with a new, double cold-trap method in the diagnosis of lung cancer. Methods Breath samples were collected from 116 patients with histologically confirmed lung cancer and 37 healthy volunteers (controls) after inspiration of purified air, synthesized through a cold-trap system. The exhaled VOC, trapped in the same system, were heat extracted. We analyzed 14 VOC with gas chromatography. Results The concentrations of exhaled cyclohexane and xylene were significantly higher in patients with lung cancer than in controls (p = 0.002 and 0.0001, respectively), increased significantly with the progression of the clinical stage of cancer (both p < 0.001), and decreased significantly after successful treatment of 6 patients with small cell lung cancer (p = 0.06 and 0.03, respectively). Conclusion Measurements of exhaled VOCs by a double cold-trap method may help diagnose lung cancer and monitor its progression and regression.

Prospective analyses of volatile organic compounds in obstructive sleep apnea patients.

Various volatile organic compounds (VOCs) are known to be toxic. Although exhaled VOC patterns change in obstructive sleep apnea (OSA) patients, individual VOC profiles are not fully determined. The primary outcome was VOC characterizations; secondary outcomes included their relationships with sleep and clinical parameters in OSA patients. We prospectively examined 32 OSA patients with an apnea-hypopnea index (AHI) ≥ 15 by full polysomnography, and 33 age- and sex-matched controls without obvious OSA symptoms. Nine severe OSA patients were examined before and after continuous positive airway pressure (CPAP) treatment. By applying a method which eliminates environmental VOC influences, exhaled VOCs were identified by gas chromatography (GC)-mass spectrometry, and their concentrations were determined by GC. Exhaled aromatic hydrocarbon concentrations (toluene, ethylbenzene, p-xylene, and phenylacetic acid) in the severe OSA groups (AHI ≥ 30) and exhaled saturated hydrocarbon concentrations (hexane, heptane, octane, nonane, and decane) in the most severe OSA group (AHI ≥ 60) were higher than those in the control group. Exhaled isoprene concentrations were increased in all OSA groups (AHI ≥ 15); acetone concentration was increased in the most severe OSA group. Ethylbenzene, p-xylene, phenylacetic acid, and nonane concentrations were increased according to OSA severity, and correlated with AHI, arousal index, and duration of percutaneous oxygen saturation (SpO2) ≤ 90%. Multiple regression analyses revealed these 4 VOC levels were associated with the duration of SpO2 ≤ 90%. Isoprene and acetone decreased after CPAP treatment. OSA increased some toxic VOCs, and some correlated with OSA severity. CPAP treatment possibly ameliorates these productions.

Development of a new measurement system to detect selectively volatile organic compounds derived from the human body

A new concept expired gas measurement system used double cold-trap method was developed. The system could detect selectively volatile organic compound (VOC) derived from the human body. The gas chromatography (GC) profiles of healthy volunteers expired gas collected by our system were analyzed. As a result, 60 VOCs were detected from the healthy volunteers expired gas. We examined 14 VOCs among them further, which could be converted to the concentration from the GC profiles. The concentration of almost VOCs decreased when the subjects inspired purified air compared with the atmosphere. On the other hand, isoprene was almost the same. It was strongly suggested that these VOCs were derived from the human body because the concentration of these VOCs in the atmosphere were nearly zero. Expired gas of two sleep apnea syndrome (SAS) patients were analyzed as preliminary study. As a result of the study, the concentration of some VOCs contained in the expired gas of the SAS patients showed higher value than a healthy controls.

Web accessibility support for visually impaired users using link content analysis

Web pages are used for a variety of purposes. End users must understand dynamically changing content and sequentially follow page links to find desired material, requiring significant time and effort. However, for visually impaired users using screen readers, it can be difficult to find links to web pages when link text and alternative text descriptions are inappropriate. Our method supports the discovery of content by analyzing 8 categories of link types, and allows visually impaired users to be aware of the content represented by links in advance. This facilitates end users access to necessary information on web pages. Our method of classifying web page links is therefore effective as a means of evaluating accessibility.

Calibration system for pulse spectrophotometry using a double-layer pulsation flow-cell

We have studied noninvasive devices for measuring total hemoglobin and hemoglobin derivatives such as carboxyhemoglobin (COHb) and methemoglobin (MetHb). A calibration procedure needs to be developed to evaluate or calibrate these devices and pulse oximeters for clinical practice. However, people and animals are sometimes exposed to risk when they are used for calibration. In this paper, we propose a new in vitro calibration system for a pulse photometer. This system has a novel double-layer pulsation flow-cell that incorporates both venous and arterial blood flow. Using the calibration system, we are able to measure the in vitro pulsatile optical density ratio (Φvt). The measured Φvt agrees well with the in vivo pulsatile optical density ratio (Φvi). This system simulates an in vivo environment with high accuracy and enables safe calibration. Consequently, the calibration system is able to standardize the performance and accuracy of pulse photometry.

Highly flexible transparent electrodes based on mesh-patterned rigid indium tin oxide

We developed highly bendable transparent indium tin oxide (ITO) electrodes with a mesh pattern for use in flexible electronic devices. The mesh patterns lowered tensile stress and hindered propagation of cracks. Simulations using the finite element method confirmed that the mesh patterns decreased tensile stress by over 10% because of the escaped strain to the flexible film when the electrodes were bent. The proposed patterned ITO electrodes were simply fabricated by photolithography and wet etching. The resistance increase ratio of a mesh-patterned ITO electrode after bending 1000 times was at least two orders of magnitude lower than that of a planar ITO electrode. In addition, crack propagation was stopped by the mesh pattern of the patterned ITO electrode. A mesh-patterned ITO electrode was used in a liquid-based organic light-emitting diode (OLED). The OLED displayed the same current density-voltage-luminance (J-V-L) curves before and after bending 100 times. These results indicate that the developed mesh-patterned ITO electrodes are attractive for use in flexible electronic devices.

Highly bendable transparent electrode using mesh patterned indium tin oxide for flexible electronic devices

We developed a highly bendable transparent indium tin oxide (ITO) electrode with mesh pattern for flexible electronic devices. Mesh pattern reduces an effect of tensile stress and propagation of cracks when the electrode is bent. The proposed ITO electrode was fabricated on a polyethylene terephthalate by means of photolithography and wet etching. The bendability was investigated through cyclic bending test. Resistance increase rate of the mesh patterned ITO electrode after 1000 times bending was approximately 9.18 × 102 times as low as that on a plane ITO electrode. In addition, the distinct cracks were not observed on the mesh patterned ITO electrode after cyclic bending. Mesh patterned ITO electrode was applied to a liquid-based organic light-emitting diode (OLED). Even the use of the mesh patterned ITO after 100 times bending, electroluminescence emission was confirmed without obvious damages. These results indicate that the mesh patterned ITO electrode gives an impact in flexible electronic devices.