Naoko Iyomoto

Characteristic X-Ray Variability of TeV Blazars: Probing the Link between the Jet and the Central Engine

We have studied the rapid X-ray variability of three extragalactic TeV γ-ray sources: Mrk 421, Mrk 501, and PKS 2155-304. Analyzing the X-ray light curves obtained from ASCA and/or Rossi X-Ray Timing Explorer observations between 1993 and 1998, we have investigated the variability in the time domain from 103 to 108 s. For all three sources, both the power spectrum density (PSD) and the structure function (SF) show a rollover with a timescale of the order of 1 day or longer, which may be interpreted as the typical timescale of successive flare events. Although the exact shape of turnover is not well constrained and the low-frequency (long timescale) behavior is still unclear, the high-frequency (short timescale) behavior is clearly resolved. We found that, on timescales shorter than 1 day, there is only small power in the variability, as indicated by a steep power spectrum density of f-2~-3. This is very different from other types of mass-accreting black hole systems, for which the short-timescale variability is well characterized by a fractal, flickering-noise PSD (f-1~-2). The steep PSD index and the characteristic timescale of flares imply that the X-ray-emitting site in the jet is of limited spatial extent: D ≥ 1017 cm distant from the base of the jet, which corresponds to ≥102 Schwarzschild radii for 107-10 M☉ black hole systems.

The Astro-H High Resolution Soft X-Ray Spectrometer

We present the overall design and performance of the Astro-H (Hitomi) Soft X-Ray Spectrometer (SXS). The instrument uses a 36-pixel array of x-ray microcalorimeters at the focus of a grazing-incidence x-ray mirror Soft X-Ray Telescope (SXT) for high-resolution spectroscopy of celestial x-ray sources. The instrument was designed to achieve an energy resolution better than 7 eV over the 0.3-12 keV energy range and operate for more than 3 years in orbit. The actual energy resolution of the instrument is 4-5 eV as demonstrated during extensive ground testing prior to launch and in orbit. The measured mass flow rate of the liquid helium cryogen and initial fill level at launch predict a lifetime of more than 4 years assuming steady mechanical cooler performance. Cryogen-free operation was successfully demonstrated prior to launch. The successful operation of the SXS in orbit, including the first observations of the velocity structure of the Perseus cluster of galaxies, demonstrates the viability and power of this technology as a tool for astrophysics.

Soft x-ray spectrometer (SXS): The high-resolution cryogenic spectrometer onboard ASTRO-H

We present the development status of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H mission. The SXS provides the capability of high energy-resolution X-ray spectroscopy of a FWHM energy resolution of < 7eV in the energy range of 0.3 – 10 keV. It utilizes an X-ray micorcalorimeter array operated at 50 mK. The SXS microcalorimeter subsystem is being developed in an EM-FM approach. The EM SXS cryostat was developed and fully tested and, although the design was generally confirmed, several anomalies and problems were found. Among them is the interference of the detector with the micro-vibrations from the mechanical coolers, which is the most difficult one to solve. We have pursued three different countermeasures and two of them seem to be effective. So far we have obtained energy resolutions satisfying the requirement with the FM cryostat.

BeppoSAX Observation of NGC 3079

Using the BeppoSAX observatory, we have observed a nearby LINER/Seyfert 2 galaxy, NGC 3079, which is known as an outflow galaxy and a bright H2O maser source. Using the Phoswich Detection System, we have revealed that the NGC 3079 nucleus suffers from a Compton-thick absorption, with a hydrogen column density ~1025 cm-2. After corrected the absorption, the 2-10 keV luminosity becomes 1042-1043 ergs s-1 at a distance of 16 Mpc. It is 2-3 orders of magnitude higher than that observed in the Medium Energy Concentrator Spectrometer band (below 10 keV). We also detected a strong Fe K line at 6.4 keV with an equivalent width of 2.4 keV, which is consistent with the heavy absorption.

Long‐term variability of the low‐luminosity active galactic nucleus of M81

Long-term X-ray variability of the low-luminosity active galactic nucleus of M81 was studied, using 16 ASCA observations spanning 5.5xa0yr. The object exhibits a factor of 3 variation over the 5.5xa0yr. The source intensity was relatively constant within each observation which lasted typically for one day, but intra-day variability by 30 per cent was detected on the 15th observation. The power-spectral density (PSD) was estimated in a ‘forward’ manner, over a frequency range of 10−8.2–10−4.3xa0Hz (period range of 0.25xa0d–5.5xa0yr), by utilizing the structure function and extensive Monte Carlo simulations in order to overcome the very sparse and uneven data samplings. When the PSD is assumed to be white below a ‘break frequency’fb and falls off as ∝xa0f−α above fb, where f is frequency and α is a positive parameter, the M81 light curve is well described with 1/fb≥800xa0d and α=1.4±0.2.

In-orbit operation of the ASTRO-H SXS

We summarize all the in-orbit operations of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H (Hit- omi) satellite. The satellite was launched on 2016/02/17 and the communication with the satellite ceased on 2016/03/26. The SXS was still in the commissioning phase, in which the setups were progressively changed. This article is intended to serve as a reference of the events in the orbit to properly interpret the SXS data taken during its short life time, and as a test case for planning the in-orbit operation for future micro-calorimeter missions.

Tumor growth suppression by gadolinium-neutron capture therapy using gadolinium-entrapped liposome as gadolinium delivery agent

Neutron capture therapy (NCT) is a promising non-invasive cancer therapy approach and some recent NCT research has focused on using compounds containing gadolinium as an alternative to currently used boron-10 considering several advantages that gadolinium offers compared to those of boron. In this study, we evaluated gadolinium-entrapped liposome compound as neutron capture therapy agent by in vivo experiment on colon-26 tumor-bearing mice. Gadolinium compound were injected intravenously via tail vein and allowed to accumulate into tumor site. Tumor samples were taken for quantitative analysis by ICP-MS at 2, 12, and 24 h after gadolinium compound injection. Highest gadolinium concentration was observed at about 2 h after gadolinium compound injection with an average of 40.3 μg/g of wet tumor tissue. We performed neutron irradiation at JRR-4 reactor facility of Japan Atomic Energy Research Institute in Tokaimura with average neutron fluence of 2×10¹² n/cm². The experimental results showed that the tumor growth suppression of gadolinium-injected irradiated group was revealed until about four times higher compared to the control group, and no significant weight loss were observed after treatment suggesting low systemic toxicity of this compound. The gadolinium-entrapped liposome will become one of the candidates for Gd delivery system on NCT.

Present performance of a single pixel Ti/Au bilayer TES calorimeter

We are developing a superconducting transition-edge sensor (TES) calorimeter for future Japanese X-ray astronomy missions (e.g. NeXT mission). The performance of our single pixel TES calorimeter is presented. We fabricated a Ti/Au (40 nm/110 nm) bilayer TES on a thin silicon-nitride membrane, which is adjusted to have a transition temperature of about 100 mK. The size of the TES is 500μm × 500μm, and 300μm × 300μm gold with a thickness of 300 nm is deposited with sputtering as an X-ray absorber. The TES calorimeter was installed in a dilution refrigerator operated at about 40 mK, with a combination of 400-series SQUID array as an ammeter. Collimated 5.9 keV X-rays (200 um in diameter) from 55Fe isotope were irradiated and X-ray pulses were obtained. Simultaneously with a fast falling time constant of 74.2 us, the energy resolution of 6.6+-0.4 eV was attained, while the baseline noise was 6.4 eV. The contents of the energy resolution are 5.1 eV of the excess noise, 3.3 eV of the readout noise, 1.6 eV of the pulse by pulse variation, and 1.9 eV of the intrinsic noise. The baseline noise are dominated by an unknown excess noise, which increases roughly in proportion to the inverse of the TES resistance. The pulse height is sensitive to the operating conditions, and the superconducting shield appears to have improved it by a factor of about 2. The calorimeter works fine over six months surviving five thermal cycles, even though it is kept in air.

Optimization of X-ray Absorbers for TES Microcalorimeters

We have investigated the thermal, electrical, and structural properties of Bi and BiCu films that are being developed as X-ray absorbers for transition-edge sensor (TES) microcalorimeter arrays for imaging X-ray spectroscopy. Bi could be an ideal material for an X-ray absorber due to its high X-ray stopping power and low specific heat capacity, but it has a low thermal conductivity, which can result in position dependence of the pulses in the absorber. In order to improve the thermal conductivity, we added Cu layers in between the Bi layers. We measured electrical and thermal conductivities of the films around 0.1 K, the operating temperature of the TES calorimeter, to examine the films and to determine the optimal thickness of the Cu layer. From the electrical conductivity measurements, we found that the Cu is more resistive on the Bi than on a Si substrate. Together with a SEM picture of the Bi surface, we concluded that the rough surface of the Bi film makes the Cu layer resistive when the Cu layer is not thick enough to fill in the roughness. From the thermal conductivity measurements, we determined the thermal diffusion constant to be 2 x 103 μm2μs-1 in a film that consists of 2.25 μm of Bi and 0.1 μm of Cu. We measured the position dependence in the film and found that its thermal diffusion constant is too low to get good energy resolution, because of the resistive Cu layer and/or possibly a very high heat capacity of our Bi films. We show plans to improve the thermal diffusion constant in our BiCu absorber.

Study of the Long-Term X-Ray Variability of a Possible Quasar RX J0957.9+6903 with ASCA

The long-term variability and spectral properties of a possible quasar, RX J0957.9+6903, were studied utilizing 16 ASCA observations spanning 5.5 years. The average 0.7–10 keV spectrum of RX J0957.9+6903 is well represented by a power-law continuum having a photon index of 1.58±0.03 and an absorption column of∼1×1021 cm−2. The 2–10 keV flux of RX J0957.9+6903 varied by a factor of four over a period of six years, around a mean of ∼ 8.8× 10−12 erg s−1 cm−2. Peak-to-peak variability within each observation was less than 25% on ∼ 1 day time scale. These properties support the classification of RX J0957.9+6903 as a quasar. The power spectrum density (PSD) was estimated in a “forward” manner over a frequency range of 10−8.2–10−4.3 Hz by utilizing the structure function method and a Monte Carlo simulation assuming a broken power-law type PSD. Then, the break frequency fb of the PSD of RX J0957.9+6903 has been constrained as 1/fb = 1600+∞ −1100 days, and the logarithmic slope of the high-frequency region of the PSD as α = −1.55± 0.2 . A comparison of the estimated PSDs is made between RX J0957.9+6903 and the M81 nucleus, observed in the same field of view.