Naoshi Murakami

The Subaru Coronagraphic Extreme Adaptive Optics System: Enabling High-Contrast Imaging on Solar-System Scales

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is a multipurpose high-contrast imaging platform designed for the discovery and detailed characterization of exoplanetary systems and serves as a testbed for high-contrast imaging technologies for ELTs. It is a multi-band instrument which makes use of light from 600 to 2500nm allowing for coronagraphic direct exoplanet imaging of the inner 3 lambda/D from the stellar host. Wavefront sensing and control are key to the operation of SCExAO. A partial correction of low-order modes is provided by Subarus facility adaptive optics system with the final correction, including high-order modes, implemented downstream by a combination of a visible pyramid wavefront sensor and a 2000-element deformable mirror. The well corrected NIR (y-K bands) wavefronts can then be injected into any of the available coronagraphs, including but not limited to the phase induced amplitude apodization and the vector vortex coronagraphs, both of which offer an inner working angle as low as 1 lambda/D. Non-common path, low-order aberrations are sensed with a coronagraphic low-order wavefront sensor in the infrared (IR). Low noise, high frame rate, NIR detectors allow for active speckle nulling and coherent differential imaging, while the HAWAII 2RG detector in the HiCIAO imager and/or the CHARIS integral field spectrograph (from mid 2016) can take deeper exposures and/or perform angular, spectral and polarimetric differential imaging. Science in the visible is provided by two interferometric modules: VAMPIRES and FIRST, which enable sub-diffraction limited imaging in the visible region with polarimetric and spectroscopic capabilities respectively. We describe the instrument in detail and present preliminary results both on-sky and in the laboratory.

Review of small-angle coronagraphic techniques in the wake of ground-based second-generation adaptive optics systems

Small-angle coronagraphy is technically and scientifically appealing because it enables the use of smaller telescopes, allows covering wider wavelength ranges, and potentially increases the yield and completeness of circumstellar environment – exoplanets and disks – detection and characterization campaigns. However, opening up this new parameter space is challenging. Here we will review the four posts of high contrast imaging and their intricate interactions at very small angles (within the first 4 resolution elements from the star). The four posts are: choice of coronagraph, optimized wavefront control, observing strategy, and post-processing methods. After detailing each of the four foundations, we will present the lessons learned from the 10+ years of operations of zeroth and first-generation adaptive optics systems. We will then tentatively show how informative the current integration of second-generation adaptive optics system is, and which lessons can already be drawn from this fresh experience. Then, we will review the current state of the art, by presenting world record contrasts obtained in the framework of technological demonstrations for space-based exoplanet imaging and characterization mission concepts. Finally, we will conclude by emphasizing the importance of the cross-breeding between techniques developed for both ground-based and space-based projects, which is relevant for future high contrast imaging instruments and facilities in space or on the ground.

Concept and science of HiCIAO: High contrast instrument for the Subaru next generation adaptive optics

Direct exploration of exoplanets is one of the most exciting topics in astronomy. Our current efforts in this field are concentrated on the Subaru 8.2m telescope at Mauna Kea, Hawaii. Making use of the good observing site and the excellent image quality, the infrared coronagraph CIAO (Coronagraphic Imager with Adaptive Optics) has been used for various kinds of surveys, which is the first dedicated cold coronagraph on the 8-10m class telescopes. However, its contrast is limited by the low-order adaptive optics and a limited suppression of the halo speckle noise. HiCIAO is a new high-contrast instrument for the Subaru telescope. HiCIAO will be used in conjunction with the new adaptive optics system (188 actuators and/or its laser guide star - AO188/LGSAO188) at the Subaru infrared Nasmyth platform. It is designed as a flexible camera comprising several modules that can be configured into different modes of operation. The main modules are the AO module with its future extreme AO capability, the warm coronagraph module, and the cold infrared camera module. HiCIAO can combine coronagraphic techniques with either polarization or spectral simultaneous differential imaging modes. The basic concept of such differential imaging is to split up the image into two or more images, and then use either different planes of polarization or different spectral filter band-passes to produce a signal that distinguishes faint objects near a bright central object from scattered halo or residual speckles. In this contribution, we will outline the HiCIAO instrument, its science, and performance simulations. The optical and mechanical details are described by Hodapp et al. (2006)1. We also present a roadmap of Japanese facilities and future plans, including ASTRO-F (AKARI), SPICA, and JTPF, for extrasolar planet explorations.

Current status of the laser guide star adaptive optics system for Subaru Telescope

The current status and recent results, since last SPIE conference at Orlando in 2006, for the laser guide star adaptive optics system for Subaru Telescope is presented. We had a first light using natural guide star and succeed to launch the sodium laser beam in October 2006. The achieved Strehl ratio on the 10th magnitude star was around 0.5 at K band. We confirmed that the full-width-half-maximum of the stellar point spread function is smaller than 0.1 arcsec even at the 0.9 micrometer wavelehgth. The size of the artificial guide star by the laser beam tuned at the wavelength of 589 nm was estimated to be 10 arcsec. The obtained blurred artificial guide star is caused by the wavefront error on the laser launching telescope. After the first light and first launch, we found that we need to modify and to fix the components, which are temporarily finished. Also components, which were postponed to fabricate after the first light, are required to build newly. All components used by the natural guide star adaptive optics system are finalized recently and we are ready to go on the sky. Next engineering observation is scheduled in August, 2008.

Polarization interferometric stellar coronagraph

A nulling stellar coronagraph based on polarization interferometry is proposed that has achromatic characteristics. The principle and the optical setup of the nulling stellar coronagraph are described. Experimental results with monochromatic and white light show the usefulness of the proposed method. A liquid-crystal device is used as a four-quadrant polarization mask, which is the key element of a polarization interferometric stellar coronagraph.

A Method to Image Extrasolar Planets with Polarized Light

ABSTRACT The light from extrasolar planets is expected to be partially polarized. The image of an extrasolar planet can be obtained from its polarized light with a polarization interferometric nulling coronagraph, where a four‐quadrant polarization mask is used. A two‐channel stellar coronagraph allows the detection of extrasolar planets by subtracting scattered light from its host star. Laboratory experiments confirm that faint extrasolar planets can be imaged with the two‐channel polarization nulling stellar coronagraph.

Nulling interferometry by use of geometric phase

Nulling interferometry is a method of detecting a faint source near a bright one, in which destructive interference is realized for the light from the bright source. A nulling interferometer that makes use of geometric phase (Pancharatnam phase) is proposed. An experimental setup is constructed to simulate a stellar interferometer with geometric-phase modulation. We attained extinction of 6 x 10(-5) in white light.

An Eight-Octant Phase-Mask Coronagraph

We present numerical simulations and laboratory experiments on an eight-octant phase-mask (EOPM) coronagraph. The numerical simulations suggest that an achievable contrast for the EOPM coronagraph can be greatly improved as compared to that of a four-quadrant phase-mask (FQPM) coronagraph for a partially resolved star. On-sky transmission maps reveal that the EOPM coronagraph has relatively high optical throughput, a small inner working angle, and large discovery space. We have manufactured an eight-segment phase mask utilizing a nematic liquid-crystal device, which can be easily switched between the FQPM and the EOPM modes. The la- boratory experiments demonstrate that the EOPM coronagraph has a better tolerance of the tip-tilt error than the FQPM one. We also discuss feasibility of a fully achromatic and high-throughput EOPM coronagraph utilizing a polarization interferometric technique.

Combination of nulling interferometer and modified pupil for observations of exo-planets

We consider a combination of two techniques, namely the nulling interferometer and halo suppression by modified pupil such as shaped pupils and apodized square apertures, which achieves very high dynamic range, in order to detect faint extra-solar planets around nearby stars. The effects of the nulling interferometer and the modified pupil are independent and in combination hence multiplied. We show that one can achieve higher dynamic range in the case of a resolved star than with either method alone. By numerical simulations, we show that the combination method can achieve dynamic range levels of 10 −10 at 3λ/D. Used alone, the two-telescope interferometer would give the nulling depth of 10 −3 whilst the halo suppression by a shaped aperture would do 10 −7 , with a point-spread-function core radius less than 3λ/D for a shaped aperture. The introduction of the modified pupil has the same effect whether it is made at the entrance apertures of the interferometer or at a re-imaged common pupil plane after the nulling interferometry. From another point of view, a nulling interferometer works as pre-optics in front of any single telescope methods, which reduces the intensity of a resolved source transmitting some uniform wavefront residuals.

Taking the vector vortex coronagraph to the next level for ground- and space-based exoplanet imaging instruments: review of technology developments in the USA, Japan, and Europe

The Vector Vortex Coronagraph (VVC) is one of the most attractive new-generation coronagraphs for ground- and space-based exoplanet imaging/characterization instruments, as recently demonstrated on sky at Palomar and in the laboratory at JPL, and Hokkaido University. Manufacturing technologies for devices covering wavelength ranges from the optical to the mid-infrared, have been maturing quickly. We will review the current status of technology developments supported by NASA in the USA (Jet Propulsion Laboratory-California Institute of Technology, University of Arizona, JDSU and BEAMCo), Europe (University of Li`ege, Observatoire de Paris- Meudon, University of Uppsala) and Japan (Hokkaido University, and Photonics Lattice Inc.), using liquid crystal polymers, subwavelength gratings, and photonics crystals, respectively. We will then browse concrete perspectives for the use of the VVC on upcoming ground-based facilities with or without (extreme) adaptive optics, extremely large ground-based telescopes, and space-based internal coronagraphs.