Nenad Drvar

Effect of twin-screw extrusion parameters on mechanical hardness of direct-expanded extrudates

Mechanical properties of cereal (starch-based) extrudates are perceived by the final consumer as criteria of quality. We investigate one of the important characteristics of extrudates, mechanical hardness, which is one of the main texture parameters. Texture quality has an influence on taste sensory evaluation, and thus on the acceptability of the product. Characteristics that have great influence on acceptability are crispness, elasticity, hardness and softness.These attributes are narrowly related to, and affected by, the process parameters. A 2-level-4-factor factorial experimental design was used to investigate the influence of temperature of expansion, screw speed, feed moisture content and feed rate, and their interactions, on the mechanical hardness of extrudates. Feed moisture content, screw speed and temperature are found to influence, while feed rate does not have significant effect on extrudate hardness.Mechanical properties of specimens were measured by means of compression testing, based on the concept of nominal stress, using a universal testing machine and special grips that were constructed for this purpose.

Maxillary Fragment Stabilization After Le Fort I Fracture With 1 Screw Pair per Plate

PURPOSE The aim of the present study was to determine whether plates with only 1 screw pair can be used for Le Fort I fracture management. Good postoperative results motivated the direct application of mandible fixation principles to the fractured midface region without additional experimental research. However, the amount and distribution of the forces in the midface region is different from those on the mandible. MATERIALS AND METHODS Testing was conducted on plastic anatomic models. The validity of the experimental model was tested before the fixation techniques were compared. Standard miniplates and miniscrews were used for fixation of the maxilla. The model surface strain analysis was conducted using the noncontact object grating method, which enabled the surface strain measurement without direct influence on the measured model. RESULTS In 2 screw pair fixation, the outer screw pair has little effect on the local strain distribution, but it lowers the contact forces along the crack. One screw pair fixation is stable enough for fixation, but it has a greater strain peak at the crack edges. CONCLUSION Our results showed that 1 screw pair per plate was enough for stable fixation, and 2 or more screw pairs should only be used when the bone fragment at the fracture site cannot sufficiently transmit forces along the crack.