Nicolas Gebert

Unambiguous SAR signal reconstruction from nonuniform displaced phase center sampling

The displaced phase center (DPC) technique will enable a wide-swath synthetic aperture radar (SAR) with high azimuth resolution. In a classic DPC system, the pulse repetition frequency (PRF) has to be chosen such that the SAR carrier moves just one half of its antenna length between subsequent radar pulses. Any deviation from this PRF will result in a nonuniform sampling of the synthetic aperture. This letter derives an innovative reconstruction algorithm and shows that an unambiguous reconstruction of a SAR signal is possible for nonuniform sampling of the synthetic aperture. This algorithm will also have great potential for multistatic satellite constellations as well as the dual receive antenna mode in Radarsat 2 and TerraSAR-X.

Multidimensional Waveform Encoding: A New Digital Beamforming Technique for Synthetic Aperture Radar Remote Sensing

This paper introduces the innovative concept of multidimensional waveform encoding for spaceborne synthetic aperture radar (SAR). The combination of this technique with digital beamforming on receive enables a new generation of SAR systems with improved performance and flexible imaging capabilities. Examples are high-resolution wide-swath radar imaging with compact antennas, enhanced sensitivity for applications like alongtrack interferometry and moving object indication, and the implementation of hybrid SAR imaging modes that are well suited to satisfy hitherto incompatible user requirements. Implementation-specific issues are discussed and performance examples demonstrate the potential of the new technique for different remote sensing applications.

Multichannel Azimuth Processing in ScanSAR and TOPS Mode Operation

Due to a system-inherent limitation, conventional synthetic aperture radar (SAR) is incapable of imaging a wide swath with high geometric resolution. This restriction can be overcome by systems with multiple receive channels in combination with an additional digital signal processing network. So far, the application of such digital beamforming algorithms for high-resolution wide-swath SAR imaging has been restricted to multichannel systems in stripmap operation. However, in stripmap mode, the overall azimuth antenna length restricts the achievable swath width, thus preventing very wide swaths as requested by future SAR missions. Consequently, new concepts for ultrawide-swath imaging are needed. A promising candidate is a SAR system with multiple azimuth channels being operated in burst mode. This paper analyzes innovative ScanSAR and Terrain Observation by Progressive Scans (TOPS) system concepts with regard to multichannel azimuth processing. For this, the theoretical analyses, performance figures, and SAR signal processing, which had previously been derived for multichannel stripmap mode, are extended to systems operating in burst modes. The investigations reveal that multichannel ScanSAR systems enable the imaging of ultrawide swaths with high azimuth resolution and compact antenna lengths. These considerations are embedded in a multichannel ScanSAR system design example to demonstrate its capability to image an ultrawide swath of 400 km with a high geometric resolution of 5 m. In a next step, this system is adapted to TOPS mode operation, including an innovative “staircase” multichannel processing approach optimized for TOPS.

Advanced synthetic aperture radar based on digital beamforming and waveform diversity

This paper introduces innovative SAR system concepts for the acquisition of high resolution radar images with wide swath coverage from spaceborne platforms. The new concepts rely on the combination of advanced multi-channel SAR front-end architectures with novel operational modes. The architectures differ regarding their implementation complexity and it is shown that even a low number of channels is already well suited to significantly improve the imaging performance and to overcome fundamental limitations inherent to classical SAR systems. The more advanced concepts employ a multidimensional encoding of the transmitted waveforms to further improve the performance and to enable a new class of hybrid SAR imaging modes that are well suited to satisfy hitherto incompatible user requirements for frequent monitoring and detailed mapping. Implementation specific issues will be discussed and examples demonstrate the potential of the new techniques for different remote sensing applications.

Airborne Demonstration of Multichannel SAR Imaging

Multichannel synthetic aperture radar (SAR) makes it possible to obtain high-resolution wide-swath imagery, thus overcoming an inherent limitation of conventional SAR. To cope with a nonuniformly sampled data array in azimuth caused by variations of the pulse repetition frequency, these systems require appropriate coherent processing such as the multichannel reconstruction algorithm. This letter presents the applicability of this algorithm to airborne measured multichannel X-band data. In this context, impact and performance of different channel-balancing methods are investigated. Furthermore, the analytic prediction of residual azimuth ambiguities is verified in the measured data by means of a point target analysis.

Azimuth Phase Center Adaptation on Transmit for High-Resolution Wide-Swath SAR Imaging

Synthetic aperture radar (SAR) systems with multiple receive channels allow for high-resolution wide-swath imaging thus overcoming a fundamental limitation of conventional single-aperture SAR. By using multiple apertures in azimuth, additional samples are received for each transmitted pulse. This allows for a reduced pulse repetition frequency (PRF) thereby enabling a wider swath. However, a nonoptimum PRF is associated with a nonuniform sample spacing in azimuth and needs to be compensated by a multichannel reconstruction algorithm. For strong deviations from the optimum PRF, the inverse character of such an algorithm might result in a degraded performance. This can be overcome by an innovative advanced transmit antenna architecture which allows for a pulse-to-pulse shift of the phase center. Such an antenna enables the adaptive adjustment of the systems phase center positions to the respective PRF, thereby ensuring constant performance over a clearly extended PRF range. In particular, in combination with conventional multichannel processing strategies, this technique represents the next step toward a fully active multiple-input multiple-output (MIMO) SAR and has a great potential for future systems.

Smart Multi-Aperture Radar Techniques for Spaceborne Remote Sensing

The paper deals with the performance of next generation SAR sensors, here referred to as SMART (Smart Multi Aperture Radar Techniques) equipped with digital beamforming capabilities. Apart from representing a technological jump, these sensors offer the flexibility of actually deciding on the (possibly hybrid) mode(s) of operation on-ground after the data have been acquired. The paper presents the performance of SMART system configurations and modes of operation for a digital beamforming SAR which covers a large swath with a high resolution.

SAR signal reconstruction from non-uniform displaced phase centre sampling

The displaced phase centre (DPC) technique enables a wide swath SAR with high azimuth resolution. In a classic DPC system, the PRF has to be chosen such that the SAR carrier moves just one half of its antenna length between subsequent radar pulses. Any deviation from this PRF results in a non-uniform sampling of the synthetic aperture. This paper shows that an unambiguous reconstruction of the SAR signal is also possible in case of such a non-optimum PRF. For this, an innovative reconstruction algorithm is derived, which enables a recovery of the unambiguous Doppler spectrum also in case of a non-uniform sampling of the synthetic aperture. This algorithm also has a great potential for multistatic satellite constellations as well as the dual receive antennas in Radarsat II and TerraSAR-X

Advanced digital beamforming concepts for future SAR systems

This paper reviews advanced multi-channel SAR system concepts for the imaging of wide swaths with high resolution. Several novel system architectures employing both direct radiating arrays and reflector antennas fed by a digital array are introduced and compared to each other with regard to their imaging performance. In addition, innovative SAR imaging modes are proposed which enable the mapping of ultra-wide swaths with high azimuth resolution. The new techniques and technologies have the potential to enhance the imaging performance of future SAR systems by one order of magnitude if compared to state of the art SAR sensors like TerraSAR-X, ALOS, Radarsat-2 or Sentinel-1.

Ultra Wide Swath Imaging with Multi-Channel ScanSAR

Multi-channel synthetic aperture radar (SAR) systems enable high-resolution wide-swath imagery thus overcoming the inherent limitation of conventional SAR. A possible realization based on the combination of multi-aperture SAR signal reconstruction in azimuth with digital beamforming on receive in elevation is given in [1]. The present paper turns focus to advanced concepts for the imaging of even wider swaths while still providing high azimuth resolution [2]. In this regard, the operation of multi-channel SAR systems in burst modes like ScanSAR or TOPS is introduced and aspects of applying the multi-aperture reconstruction algorithm to burst mode data are analyzed. The influence of the digital processing network on performance parameters as signal-to-noise-ratio and azimuth ambiguity-to-signal-ratio in multi-channel burst mode systems is considered and embedded in the design example of a ScanSAR system that allows for the imaging of a 400 km wide swath with a geometric resolution of 5 m. Finally, first results for a multi-channel TOPS system are presented and an optimized TOPS processing approach is introduced.