Nino Lomadze

Photomechanical degrafting of azo-functionalized poly(methacrylic acid) (PMAA) brushes.

We report on the preparation and characterization of photosensitive polymer brushes. The brushes are synthesized through polymer analogous attachment of azo-benzene groups to surface-attached poly(methacrylic acid) (PMAA) chains. The topography of the photosensitive brushes shows a strong reaction upon irradiation with UV light. While homogeneous illumination leaves the polymer topography unchanged, irradiation of the samples with interference patterns with periodically varying light intensity leads to the formation of surface relief gratings (SRG). The height of the stripes of the grating can be controlled by adjusting the irradiation time. The SRG pattern can be erased through solvent treatment when the periodicity of the stripe pattern is less than the length of the fully stretched polymer chains. In the opposite case, photomechanical scission of receding polymer chains is observed during SRG formation, and the inscribed patterns are permanent.

Opto-Mechanical Scission of Polymer Chains in Photosensitive Diblock-Copolymer Brushes

In this paper we report on an opto-mechanical scission of polymer chains within photosensitive diblock-copolymer brushes grafted to flat solid substrates. We employ surface-initiated polymerization of methylmethacrylate (MMA) and t-butyl methacrylate (tBMA) to grow diblock-copolymer brushes of poly(methylmethacrylate-b-t-butyl methacrylate) following the atom transfer polymerization (ATRP) scheme. After the synthesis, deprotection of the PtBMA block yields poly(methacrylic acid) (PMAA). To render PMMA-b-PMAA copolymers photosensitive, cationic azobenzene containing surfactants are attached to the negatively charged outer PMAA block. During irradiation with an ultraviolet (UV) interference pattern, the extent of photoisomerization of the azobenzene groups varies spatially and results in a topography change of the brush, i.e., formation of surface relief gratings (SRG). The SRG formation is accompanied by local rupturing of the polymer chains in areas from which the polymer material recedes. This opto-mechanically induced scission of the polymer chains takes place at the interfaces of the two blocks and depends strongly on the UV irradiation intensity. Our results indicate that this process may be explained by employing classical continuum fracture mechanics, which might be important for tailoring the phenomenon for applying it to poststructuring of polymer brushes.

Photosensitive surfactants: Micellization and interaction with DNA

Recently, photosensitive surfactants have re-attracted considerable attention. It has been shown that their association with oppositely charged biologically important polyelectrolytes, such as DNA or microgels, can be efficiently manipulated simply by light exposure. In this article, we investigate the self-assembly of photosensitive surfactants as well as their interactions with DNA by calorimetric and spectroscopic methods. Critical micelle concentration (CMC), standard micellization enthalpy, entropy, and Gibbs energy were determined in different conditions (ionic strengths and temperatures) for a series of cationic surfactants with an azobenzene group in their tail. It is shown, that aggregation forces of photosensitive units play an important role in the micellization giving the major contribution to the micellization enthalpy. The onset of the aggregation can be traced from shift of the absorption peak position in the UV-visible spectrum. Titration UV-visible spectroscopy is used as an alternative, simple, and sensitive approach to estimate CMC. The titration UV-visible spectroscopy was also employed to investigate interactions (CAC: critical aggregation concentration, precipitation, and colloidal stabilization) in the DNA-surfactant complex.

Dramatic selectivity differences in the association of DNA and RNA models with new ethylene- and propylene diamine derivatives and their copper complexes.

The affinities of polyamines consisting of ethylenediamine units equipped with either one or two terminal naphthyl-, anthryl-, or acridyl units towards PolyA.PolyU as an RNA model, and Poly(dA).Poly(dT) as a DNA model are screened by measuring the melting point changes (DeltaT(m)) of the double strands, and also partially by a fluorimetric binding assay using ethidium bromide. The larger aromatic moieties with long spacers between them allow bisintercalation; this leads to an increased preference for DNA in comparison to RNA, where ion pairing of the ammonium centers with the major RNA groove phosphates dominates. Allosteric affinity control by metalation is achieved e.g. with Cu(2+) ions, which induce conformational distortions within the chains. With anthryl- in contrast to naphthyl derivatives intercalation can be so strong that distortion of the ethylenediamine chain by metalation is not powerful enough. A particularly high concentration of positive charges is accessible with tripodal derivatives built up from ethylenediamine and propylenediamine units; in the absence of aryl parts, which interfere with the RNA groove preference, one observes the highest affinity difference known until today, reflected in a melting point ratio of DeltaT(m(RNA))/DeltaT(m(DNA)) = 40, whereas other synthetic ligands reach only a DeltaT(m(RNA))/DeltaT(m(DNA)) ratio of about 3.

Interactions of diaryl-polyamines with nucleic acids. Allosteric effects with dinuclear copper complexes

Abstract A series of α,ω-diarylamines with a variable number of ethylenediamine units between terminal naphthylrings shows dramatic affinity changes towards double-stranded nucleic acids, particularly upon complexation with Cu(II) ions. Metal salts alone have under the applied conditions only a negligible effect. The affinity of the metal-free ligands towards nucleic acids shows significant differences to those of the underlying polyamines, with a reversed stabilization of DNA instead of the usually observed preference for RNA. The affinity changes and preliminary NMR studies are in line with intercalation of naphthylrings into the double-stranded nucleic acid, which is hampered by complex formation with Cu(II).

Manipulation of small particles at solid liquid interface: light driven diffusioosmosis

The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.

Phase diagrams of DNA–photosensitive surfactant complexes: Effect of ionic strength and surfactant structure

Realization of all-optically controlled and efficient DNA compaction is the major motivation in the study of interactions between DNA and photosensitive surfactants. In this article, using recently published approach of phase diagram construction [Y. Zakrevskyy, P. Cywinski, M. Cywinska, J. Paasche, N. Lomadze, O. Reich, H.-G. Löhmannsroben, and S. Santer, J. Chem. Phys. 140, 044907 (2014)], a strategy for substantial reduction of compaction agent concentration and simultaneous maintaining the light-induced decompaction efficiency is proposed. The role of ionic strength (NaCl concentration), as a very important environmental parameter, and surfactant structure (spacer length) on the changes of positions of phase transitions is investigated. Increase of ionic strength leads to increase of the surfactant concentration needed to compact DNA molecule. However, elongation of the spacer results to substantial reduction of this concentration. DNA compaction by surfactants with longer tails starts to take place in diluted solutions at charge ratios Z < 1 and is driven by azobenzene-aggregation compaction mechanism, which is responsible for efficient decompaction. Comparison of phase diagrams for different DNA-photosensitive surfactant systems allowed explanation and proposal of a strategy to overcome previously reported limitations of the light-induced decompaction for complexes with increasing surfactant hydrophobicity.

Light-Induced Reversible Change of Roughness and Thickness of Photosensitive Polymer Brushes.

We investigate light-induced changes in thickness and roughness of photosensitive polymer brushes containing azobenzene cationic surfactants by atomic force microscopy (AFM) in real time during light irradiation. Because the cis-state of azobenzene unit requires more free volume than its trans counterpart, the UV light-induced expansion of polymer thin films associated with the trans-to-cis isomerism of azobenzene groups is expected to occur. This phenomenon is well documented in physisorbed polymer films containing azobenzene groups. In contrast, photosensitive polymer brushes show a decrease in thickness under UV irradiation. We have found that the azobenzene surfactants in their trans-state form aggregates within the brush. Under irradiation, the surfactants undergo photoisomerization to the cis-state, which is more hydrophilic. As a consequence, the aggregates within the brush are disrupted, and the polymer brush contracts. When subsequently irradiated with blue light the polymer brush thickness returns back to its initial value. This behavior is related to isomerization of the surfactant to the more hydrophobic trans-state and subsequent formation of surfactant aggregates within the polymer brush. The photomechanical function of the dry polymer brush, i.e., contraction and expansion, was found to be reversible with repeated irradiation cycles and requires only a few seconds for switching. In addition to the thickness change, the roughness of the brush also changes reversibly between a few Angstroms (blue light) and several nanometers (UV light). Photosensitive polymer brushes represent smart films with light responsive thickness and roughness that could be used for generating dynamic fluctuating surfaces, the function of which can be turned on and off in a controllable manner on a nanometer length scale.

Reversal of polyamine selectivity for DNA and RNA by steric hindrance

The polyamines known until today generally bind better to double-stranded RNA than to DNA, as shown in significantly higher melting point increases with RNA. We report that large and bulky polyamines with three or four positively charged nitrogen centers connected via flexible or rigid linkers to either a benzene or an adamantane core show high affinities and are large enough to exhibit a strong preference for double-stranded DNA (polydApolydT) in comparison to RNA (polyApolyU), which differs by its smaller and deeper groove.

Cyclic and multicyclic polymers by thermodynamically controlled polycondensations—theory and experiments

Thermodynamically controlled polycondensations (TCPs) are defined as stage-growth polymerizations involving condensation step with rapid equilibration including “back-biting degradation”. It is theoretically demonstrated that the molar concentration of linear chains responsible for their cyclization tendency dramatically decreases with higher conversions, so that a clean TCP yields 100% cycles at 100% conversion. Therefore, a TCP with 100% conversion yields the same reaction product as are equilibration of monomeric or oligomeric heterocycles (in this connection a new definition of conversion is presented). In contrast, the classical theory of TCPs elaborated by Stockmayer and Flory postulates 2.5–3.0 weight% of cycles in combination with one giant linear chain (97.0–97.5 weight%) as the endproduct of 100% conversion. Furthermore, it is demonstrated that the new theory of TCPs also applies to “a2 + bn” polycondensations. When the equilibrium favors smaller cycles, spirocycles and low molar mass multicycles are thermodynamically favored over macrocyclic networks. Experimental results discussed in this work concern nylon-6 and nylon −7/−6,8, poly(1,3-dioxolane), tin containing polyethers, and multicyclic polyethers derived from germanium, tin, titanium and zirconium alkoxides.