Noam Tal

Poly(methyl methacrylate) Grafting onto Stainless Steel Surfaces: Application to Drug-Eluting Stents

Drug-eluting stents (DESs) have been associated with adverse clinical effects. Moreover, recent publications have shown that the coating of DESs suffers from defects. The purpose of this contribution is to examine a three-step process for surface modification as a means of improving the durability of DESs. In the first step, 4-(2-bromoethyl)benzenediazonium tetrafluoroborate was electrografted onto a stainless steel (SS) stent. X-ray photoelectron spectroscopy (XPS) of the modified stent confirmed the formation of the organic layer. In the second step, methyl methacrylate was polymerized onto the grafted surface by atom-transfer radical polymerization. XPS, electrochemical impedance spectroscopy, and contact-angle measurements were used to characterize the polymer brushes. The last step involved spray-coating of the stent with a drug-in-polymer matrix [poly(n-butyl methacrylate)/poly(ethylene-co-vinyl acetate) + paclitaxel]. Scanning electron microscopy confirmed the considerably improved durability of the drug-in-polymer matrix. Bare controls showed greater cracking and delamination of the coating than did the two-step modified stents after incubation under physiological (37 degrees C) and accelerated (60 degrees C) conditions. Finally, paclitaxel controlled release from the modified SS DESs was moderate compared with that of nontreated samples. In conclusion, the proposed method significantly improves the durability of drug-in-polymer matrixes on a SS DESs.

Drug-Eluting Stent With Improved Durability and Controllability Properties, Obtained Via Electrocoated Adhesive Promotion Layer

Drug-eluting stents (DES) have become an accepted technology in intravascular intervention. Manufacturing methodologies of DES are based mainly on mechanical processes, which tend to generate coatings that have poor stability properties; these were recently related as a potential hazard. A novel approach for significantly increasing the adhesion of polymer coatings onto DES is presented. The method is based on the electrochemistry of diazonium salts. These substances are organic compounds with the characteristic structure of R-N(2) (+) X(-), where R is an organic residue and X(-) is an anion. The objective of this article is to study the properties of a selected diazonium salt 4-(1-dodecyloxy)-phenyldiazonium tetrafluoroborate, referred as C(12)-phenyldiazonium. This material was found to be a superior adhesive promoter for polymeric coatings applied onto metallic stents. C(12)-phenyldiazonium was synthesized and electrocoated on metallic stents and plates. The multilayer films of C(12)-phenyldiazonium were further characterized through electrochemical (cyclic voltammetry, impedance spectroscopy), physical (light and scanning electron microscopy, X-ray photoelectron spectroscopy, peeling tests), and chemical methodology (high pressure liquid chromatography). Further biocompatibility properties of the electrocoated basecoat were evaluated using in vitro and in vivo models. Synthesized C(12)-phenyldiazonium was successfully electrocoated onto metallic surfaces. Electrochemical tests demonstrated its efficient and controllable electrocoating. C(12)-phenyldiazonium was found to increase polymeric coating stability as was reflected by a standard adhesion test. Electrocoated metallic stents spray-coated with a second polymeric film showed improved durability following incubation in physiological buffer. Furthermore, this improvement in durability exhibits stabilized drug release. In addition, biocompatibility evaluations have demonstrated basecoats inert properties.

Electropolymerized tricopolymer based on N-pyrrole derivatives as a primer coating for improving the performance of a drug-eluting stent.

The coating of medical implants by polymeric films aims at increasing their biocompatibility as well as providing a durable matrix for the controlled release of a drug. In many cases, the coating is divided into a primer layer, which bridges between the medical implant and the drug-eluting matrix. The primer coating must be very carefully designed in order to provide optimal interactions with the surface of the medical implant and the outer layer. Here we present a simple and versatile approach for designing the primer layer based on electropolymerization of a carefully chosen blend of three different pyrrole derivatives: N-methylpyrrole (N-me), N-(2-carboxyethyl)pyrrole (PPA), and the butyl ester of N-(2-carboxyethyl)pyrrole (BuOPy). The composition and physical properties of the primer layer were studied in detail by atomic force microscopy (AFM) and a nano scratch tester. The latter provides the in-depth analysis of the adhesion and viscoelasticity of the coating. AFM phase imaging reveals a uniform distribution of the three monomers forming rough morphology. This primer layer significantly improved the morphology, stability, and paclitaxel release profile of a paclitaxel-eluting matrix based on methyl and lauryl methacrylates.

Electrochemical co-deposition of sol–gel/carbon nanotube composite thin films for antireflection and non-linear optics

Sol–gel/carbon nanotube (CNT) nano-composite films were electrochemically deposited by applying a negative potential to a conducting substrate, i.e. indium tin oxide (ITO) and an Ag grid printed on polyethylene terephthalate (PET). The deposition is driven by the local pH rise on the cathode that catalyzes the formation of sol–gel films. The latter serve as a binder and trap for CNTs. The deposition can be well manipulated by the deposition potential and time, and the film can be selectively electrodeposited on the conductive parts of Ag grids printed on PET from an optimized dispersion. The thickness, transmittance, morphology and hydrophilicity of the films are characterized by profilometry, spectrophotometry, scanning electron microscopy (SEM) and water contact angle, respectively. It is further revealed that the electrodeposited sol–gel/CNT composite films have non-linear optical properties and exhibit pronounced antireflective performance (specular reflection < 0.5%) over a visible to long-wave IR range, allowing their potential application as optical materials.

Effect of matrix-nanoparticle interactions on recognition of aryldiazonium nanoparticle-imprinted matrices

AbstractThe selective recognition of nanoparticles (NPs) can be achieved by nanoparticle-imprinted matrices (NAIMs), where NPs are imprinted in a matrix followed by their removal to form voids that can reuptake the original NPs. The recognition depends on supramolecular interactions between the matrix and the shell of the NPs, as well as on the geometrical suitability of the imprinted voids to accommodate the NPs. Here, gold NPs stabilized with citrate (AuNPs-cit) were preadsorbed onto a conductive surface followed by electrografting of p-aryldiazonium salts (ADS) with different functional groups. The thickness of the matrix was carefully controlled by altering the scan number. The AuNPs-cit were removed by electrochemical dissolution. The recognition of the NAIMs was determined by the reuptake of the original AuNPs-cit by the imprinted voids. We found that the recognition efficiency is a function of the thickness of the NAIM layer and is sensitive to the chemical structure of the matrix. Specifically, a subtle change of the functional group of the p-aryldiazonium building block, which was varied from an ether to an ester, significantly affected the recognition of the NPs.