Nobuhiro Yanai

One-dimensional imidazole aggregate in aluminium porous coordination polymers with high proton conductivity

The development of anhydrous proton-conductive materials operating at temperatures above 80 degrees C is a challenge that needs to be met for practical applications. Herein, we propose the new idea of encapsulation of a proton-carrier molecule--imidazole in this work--in aluminium porous coordination polymers for the creation of a hybridized proton conductor under anhydrous conditions. Tuning of the host-guest interaction can generate a good proton-conducting path at temperatures above 100 degrees C. The dynamics of the adsorbed imidazole strongly affect the conductivity determined by (2)H solid-state NMR. Isotope measurements of conductivity using imidazole-d4 showed that the proton-hopping mechanism was dominant for the conducting path. This work suggests that the combination of guest molecules and a variety of microporous frameworks would afford highly mobile proton carriers in solids and gives an idea for designing a new type of proton conductor, particularly for high-temperature and anhydrous conditions.

Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer

The development of a new methodology for visualizing and detecting gases is imperative for various applications. Here, we report a novel strategy in which gas molecules are detected by signals from a reporter guest that can read out a host structural transformation. A composite between a flexible porous coordination polymer and fluorescent reporter distyrylbenzene (DSB) selectively adsorbed CO₂ over other atmospheric gases. This adsorption induced a host transformation, which was accompanied by conformational variations of the included DSB. This read-out process resulted in a critical change in DSB fluorescence at a specific threshold pressure. The composite shows different fluorescence responses to CO₂ and acetylene, compounds that have similar physicochemical properties. Our system showed, for the first time, that fluorescent molecules can detect gases without any chemical interaction or energy transfer. The host-guest coupled transformations play a pivotal role in converting the gas adsorption events into detectable output signals.

Guest-to-Host Transmission of Structural Changes for Stimuli-Responsive Adsorption Property

We show that structural changes of a guest molecule can trigger structural transformations of a crystalline host framework. Azobenzene was introduced into a flexible porous coordination polymer (PCP), and cis/trans isomerizations of the guest azobenzene by light or heat successfully induced structural transformations of the host PCP in a reversible fashion. This guest-to-host structural transmission resulted in drastic changes in the gas adsorption property of the host-guest composite, displaying a new strategy for creating stimuli-responsive porous materials.

Colloidal-Sized Metal–Organic Frameworks: Synthesis and Applications

Colloidal metal-organic frameworks (CMOFs), nanoporous colloidal-sized crystals that are uniform in both size and polyhedral shape, are crystals composed of metal ions and organic bridging ligands, which can be used as building blocks for self-assembly in organic and aqueous liquids. They stand in contrast to conventional metal-organic frameworks (MOFs), which scientists normally study in the form of bulk crystalline powders. However, powder MOFs generally have random crystal size and shape and therefore do not possess either a definite mutual arrangement with adjacent particles or uniformity. CMOFs do have this quality, which can be important in vital uptake and release kinetics. In this Account, we present the diverse methods of synthesis, pore chemistry control, surface modification, and assembly techniques of CMOFs. In addition, we survey recent achievements and future applications in this emerging field. There is potential for a paradigm shift, away from using just bulk crystalline powders, towards using particles whose size and shape are regulated. The concept of colloidal MOFs takes into account that nanoporous MOFs, conventionally prepared in the form of bulk crystalline powders with random crystal size, shape, and orientation, may also form colloidal-sized objects with uniform size and morphology. Furthermore, the traditional MOF functions that depend on porosity present additional control over those MOF functions that depend on pore interactions. They also can enable controlled spatial arrangements between neighboring particles. To begin, we discuss progress regarding synthesis of MOF nano- and microcrystals whose crystal size and shape are well regulated. Next, we review the methods to modify the surfaces with dye molecules and polymers. Dyes are useful when seeking to observe nonluminescent CMOFs in situ by optical microscopy, while polymers are useful to tune their interparticle interactions. Third, we discuss criteria to assess the stability of CMOFs for various applications. In another section of this Account, we give examples of supracrystal assembly in liquid, on substrates, at interfaces, and under external electric fields. We end this Account with discussion of possible future developments, both conceptual and technological.

Photon Upconversion in Supramolecular Gel Matrixes: Spontaneous Accumulation of Light-Harvesting Donor–Acceptor Arrays in Nanofibers and Acquired Air Stability

Efficient triplet-triplet annihilation (TTA)-based photon upconversion (UC) is achieved in supramolecular organogel matrixes. Intense UC emission was observed from donor (sensitizer)-acceptor (emitter) pairs in organogels even under air-saturated condition, which solved a major problem: deactivation of excited triplet states and TTA-UC by molecular oxygen. These unique TTA-UC molecular systems were formed by spontaneous accumulation of donor and acceptor molecules in the gel nanofibers which are stabilized by developed hydrogen bond networks. These molecules preorganized in nanofibers showed efficient transfer and migration of triplet energy, as revealed by a series of spectroscopic, microscopic, and rheological characterizations. Surprisingly, the donor and acceptor molecules incorporated in nanofibers are significantly protected from the quenching action of dissolved molecular oxygen, indicating very low solubility of oxygen to nanofibers. In addition, efficient TTA-UC is achieved even under excitation power lower than the solar irradiance. These observations clearly unveil the adaptive feature of host gel nanofiber networks that allows efficient and cooperative inclusion of donor-acceptor molecules while maintaining their structural integrity. As evidence, thermally induced reversible assembly/disassembly of supramolecular gel networks lead to reversible modulation of the UC emission intensity. Moreover, the air-stable TTA-UC in supramolecular gel nanofibers was generally observed for a wide combination of donor-acceptor pairs which enabled near IR-to-yellow, red-to-cyan, green-to-blue, and blue-to-UV wavelength conversions. These findings provide a new perspective of air-stable TTA-UC molecular systems; spontaneous and adaptive accumulation of donor and acceptor molecules in oxygen-blocking, self-assembled nanomatrixes. The oxygen-barrier property of l-glutamate-derived organogel nanofibers has been unveiled for the first time, which could find many applications in stabilizing air-sensitive species in aerated systems.

Photon upconverting liquids: Matrix-free molecular upconversion systems functioning in air

A nonvolatile, in-air functioning liquid photon upconverting system is developed. A rationally designed triplet sensitizer (branched alkyl chain-modified Pt(II) porphyrin) is homogeneously doped in energy-harvesting liquid acceptors with a 9,10-diphenylanthracene unit. A significantly high upconversion quantum yield of ∼28% is achieved in the solvent-free liquid state, even under aerated conditions. The liquid upconversion system shows a sequence of efficient triplet energy transfer and migration of two itinerant excited states which eventually collide with each other to produce a singlet excited state of the acceptor. The observed insusceptibility of upconversion luminescence to oxygen indicates the sealing ability of molten alkyl chains introduced to liquefy chromophores. The involvement of the energy migration process in triplet-triplet annihilation (TTA) provides a new perspective in designing advanced photon upconversion systems.

Fast and long-range triplet exciton diffusion in metal–organic frameworks for photon upconversion at ultralow excitation power

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation upconversion (TTA-UC) has emerged as a promising wavelength-shifting methodology because it permits UC at excitation powers as low as the solar irradiance. However, its application has been significantly hampered by the slow diffusion of excited molecules in solid matrices. Here, we introduce metal-organic frameworks (MOFs) that promote TTA-UC by taking advantage of triplet exciton migration among fluorophores that are regularly aligned with spatially controlled chromophore orientations. We synthesized anthracene-containing MOFs with different molecular orientations, and the analysis of TTA-UC emission kinetics unveiled a high triplet diffusion rate with a micrometre-scale diffusion length. Surface modification of MOF nanocrystals with donor molecules and their encapsulation in glassy poly(methyl methacrylate) (PMMA) allowed the construction of molecular-diffusion-free solid-state upconverters, which lead to an unprecedented maximization of overall UC quantum yield at excitation powers comparable to or well below the solar irradiance.

Unveiling thermal transitions of polymers in subnanometre pores.

The thermal transitions of confined polymers are important for the application of polymers in molecular scale devices and advanced nanotechnology. However, thermal transitions of ultrathin polymer assemblies confined in subnanometre spaces are poorly understood. In this study, we show that incorporation of polyethylene glycol (PEG) into nanochannels of porous coordination polymers (PCPs) enabled observation of thermal transitions of the chain assemblies by differential scanning calorimetry. The pore size and surface functionality of PCPs can be tailored to study the transition behaviour of confined polymers. The transition temperature of PEG in PCPs was determined by manipulating the pore size and the pore–polymer interactions. It is also striking that the transition temperature of the confined PEG decreased as the molecular weight of PEG increased.

Porous coordination polymer with pyridinium cationic surface, [Zn(2)(tpa)(2)(cpb)].

We have synthesized a porous coordination polymer containing a pyridinium cation as an organic linker and have investigated the methanol absorptive ability of the pyridinium cationic surface. The result implies that the pyridinium cationic surface participates in the strong adsorption of methanol.

Electric Field-Induced Assembly of Monodisperse Polyhedral Metal–Organic Framework Crystals

Monodisperse polyhedral metal-organic framework (MOF) particles up to 5 μm in size, large enough to enable in situ optical imaging of particle orientation, were synthesized by the strategy of simultaneous addition of two capping ligands with different binding strength during crystallization. Upon dispersing them in ethylene glycol and applying AC electric field, the particles facets link to form linear chains. We observe well-regulated crystal orientation not only for rhombic dodecahedra all of whose facets are equivalent, but also for truncated cubes with nondegenerate facets. After removing the electric field, chains disassemble if their facets contain even modest curvature, but remain intact if their facets are planar. This assembly strategy offers a general route to fabricate oriented polyhedral crystal arrays of potential interest for new applications and functions.