Noor Nahar

Isolation and characterization of a Lysinibacillus strain B1-CDA showing potential for bioremediation of arsenics from contaminated water

The main objective of this study was to identify and isolate arsenic resistant bacteria that can be used for removing arsenic from the contaminated environment. Here we report a soil borne bacterium, B1-CDA that can serve this purpose. B1-CDA was isolated from the soil of a cultivated land in Chuadanga district located in the southwest region of Bangladesh. The morphological, biochemical and 16S rRNA analysis suggested that the isolate belongs to Lysinibacillus sphaericus. The minimum inhibitory concentration (MIC) value of the isolate is 500 mM (As) as arsenate. TOF-SIMS and ICP-MS analysis confirmed intracellular accumulation and removal of arsenics. Arsenic accumulation in cells amounted to 5.0 mg g−1 of the cells dry biomass and thus reduced the arsenic concentration in the contaminated liquid medium by as much as 50%. These results indicate that B1-CDA has the potential for remediation of arsenic from the contaminated water. We believe the benefits of implementing this bacterium to efficiently reduce arsenic exposure will not only help to remove one aspect of human arsenic poisoning but will also benefit livestock and native animal species. Therefore, the outcome of this research will be highly significant for people in the affected area and also for human populations in other countries that have credible health concerns as a consequence of arsenic-contaminated water.

In silico and in vivo studies of an Arabidopsis thaliana gene, ACR2, putatively involved in arsenic accumulation in plants.

AbstractPreviously, our in silico analyses identified four candidate genes that might be involved in uptake and/or accumulation of arsenics in plants: arsenate reductase 2 (ACR2), phytochelatin synthase 1 (PCS1) and two multi-drug resistant proteins (MRP1 and MRP2) [Lund et al. (2010) J Biol Syst 18:223–224]. We also postulated that one of these four genes, ACR2, seems to play a central role in this process. To investigate further, we have constructed a 3D structure of the Arabidopsis thaliana ACR2 protein using the iterative implementation of the threading assembly refinement (I-TASSER) server. These analyses revealed that, for catalytic metabolism of arsenate, the arsenate binding-loop (AB-loop) and residues Phe-53, Phe-54, Cys-134, Cys-136, Cys-141, Cys-145, and Lys-135 are essential for reducing arsenate to arsenic intermediates (arsenylated enzyme-substrate intermediates) and arsenite in plants. Thus, functional predictions suggest that the ACR2 protein is involved in the conversion of arsenate to arsenite in plant cells. To validate the in silico results, we exposed a transfer-DNA (T-DNA)-tagged mutant of A. thaliana (mutation in the ACR2 gene) to various amounts of arsenic. Reverse transcriptase PCR revealed that the mutant exhibits significantly reduced expression of the ACR2 gene. Spectrophotometric analyses revealed that the amount of accumulated arsenic compounds in this mutant was approximately six times higher than that observed in control plants. The results obtained from in silico analyses are in complete agreement with those obtained in laboratory experiments. FigureStudies of structure and function of Arabidopsis thaliana ACR2 protein by in silico and in vivo analyses. The iterative implementation of the threading assembly refinement (I-TASSER) server was used for constructing a 3D structure of ACR2 protein. In silico results suggest that the ACR2 protein is involved in conversion of arsenate to arsenite in the plant cells. Validation of the in silico results was performed by in vivo experiments.

Comparative genome analysis of Lysinibacillus B1-CDA, a bacterium that accumulates arsenics

Previously, we reported an arsenic resistant bacterium Lysinibacillus sphaericus B1-CDA, isolated from an arsenic contaminated lands. Here, we have investigated its genetic composition and evolutionary history by using massively parallel sequencing and comparative analysis with other known Lysinibacillus genomes. Assembly of the sequencing reads revealed a genome of ~4.5 Mb in size encompassing ~80% of the chromosomal DNA. We found that the set of ordered contigs contains abundant regions of similarity with other Lysinibacillus genomes and clearly identifiable genome rearrangements. Furthermore, all genes of B1-CDA that were predicted be involved in its resistance to arsenic and/or other heavy metals were annotated. The presence of arsenic responsive genes was verified by PCR in vitro conditions. The findings of this study highlight the significance of this bacterium in removing arsenics and other toxic metals from the contaminated sources. The genetic mechanisms of the isolate could be used to cope with arsenic toxicity.

ARSENIC ACCUMULATION IN PLANTS — OUTLINING STRATEGIES FOR DEVELOPING IMPROVED VARIETY OF CROPS FOR AVOIDING ARSENIC TOXICITY IN FOODS

Contamination of food with arsenics is a potential health risk for both humans and animals in many regions of the world, especially in Asia. Arsenics can be accumulated in humans, animals and plants for a longer period and a long-term exposure of humans to arsenics results in severe damage of kidney, lever, heart etc. and many other vascular diseases. Arsenic contamination in human may also lead to development of cancer. In this paper we report our results on data mining approach (an in silico analysis based on searching of the existing genomic databases) for identification and characterization of genes that might be responsible for uptake, accumulation or metabolism of arsenics. For these in silico analyses we have involved the model plant Arabidopsis thaliana in our investigation. By employing a system biology model (a kinetic model) we have studied the molecular mechanisms of these processes in this plant. This model contains equations for uptake, metabolism and sequestration of different types of arsenic; As(V), As(III), MMAA and DMAA. The model was then implemented in the software XPP. The model was also validated against the data existing in the literatures. Based on the results of these in silico studies we have developed some strategies that can be used for reducing arsenic contents in different parts of the plant. Data mining experiments resulted in identification of two candidate genes (ACR2, arsenate reductase 2 and PCS1, phytochelatin synthase 1) that are involved either in uptake, transport or cellular localization of arsenic in A. thaliana. However, our system biology model revealed that by increasing the level of arsenate reductase together with an increased rate of arsenite sequestration in the vacuoles (by involving an arsenite efflux pump MRP1/2), it is possible to reduce the amount of arsenics in the shoots of A. thaliana to 11–12%.

Phytoremediation of arsenic from the contaminated soil using transgenic tobacco plants expressing ACR2 gene of Arabidopsis thaliana

We have cloned, characterized and transformed the AtACR2 gene (arsenic reductase 2) of Arabidopsis thaliana into the genome of tobacco (Nicotiana tabacum, var Sumsun). Our results revealed that the transgenic tobacco plants are more tolerant to arsenic than the wild type ones. These plants can grow on culture medium containing 200μM arsenate, whereas the wild type can barely survive under this condition. Furthermore, when exposed to 100μM arsenate for 35days the amount of arsenic accumulated in the shoots of transgenic plants was significantly lower (28μg/g d wt.) than that found in the shoots of non-transgenic controls (40μg/g d wt.). However, the arsenic content in the roots of transgenic plants was significantly higher (2400μg/g d. wt.) than that (2100μg/g d. wt.) observed in roots of wild type plants. We have demonstrated that Arabidopsis thaliana AtACR2 gene is a potential candidate for genetic engineering of plants to develop new crop cultivars that can be grown on arsenic contaminated fields to reduce arsenic content of the soil and can become a source of food containing no arsenic or exhibiting substantially reduced amount of this metalloid.

In silico and in vivo studies of molecular structures and mechanisms of AtPCS1 protein involved in binding arsenite and/or cadmium in plant cells

This paper reports a continuation of our previous research on the phytochelatin synthase1 (PCS1) gene involved in binding and sequestration of heavy metals or metalloids in plant cells [1]. Construction of a 3D structure of the Arabidopsis thaliana PCS1 protein and prediction of gene function by employing iterative implementation of the threading assembly refinement (I-TASSER) revealed that PC ligands (3GC-gamma-glutamylcysteine) and Gln50, Pro53, Ala54, Tyr55, Cys56, Ile102, Gly161, His162, Phe163, Asp204 and Arg211 residues are essential for formation of chelating complex with cadmium (Cd2+) or arsenite (AsIII). This finding suggests that the PCS1 protein might be involved in the production of the enzyme phytochelatin synthase, which might in turn bind, localize, store or sequester heavy metals in plant cells. For validation of the in silico results, we included a T-DNA tagged mutant of Arabidopsis thaliana, SAIL_650_C12, (mutation in AtPCS1 gene) in our investigation. Furthermore, using reverse transcriptase PCR we confirmed that the mutant does not express the AtPCS1 gene. Mutant plants of SAIL_650_C12 were exposed to various amounts of cadmium (Cd2+) and arsenite (AsIII) and the accumulation of these toxic metals in the plant cells was quantified spectrophotometrically. The levels of Cd2+ and AsIII accumulation in the mutant were approximately 2.8 and 1.6 times higher, respectively, than that observed in the wild-type controlled plants. We confirmed that the results obtained in in silico analyses complement those obtained in in vivo experiments.

Bioremediation of hexavalent chromium (VI) by a soil-borne bacterium, Enterobacter cloacae B2-DHA

Chromium and chromium containing compounds are discharged into the nature as waste from anthropogenic activities, such as industries, agriculture, forest farming, mining and metallurgy. Continued disposal of these compounds to the environment leads to development of various lethal diseases in both humans and animals. In this paper, we report a soil borne bacterium, B2-DHA that can be used as a vehicle to effectively remove chromium from the contaminated sources. B2-DHA is resistant to chromium with a MIC value of 1000 µg mL−1 potassium chromate. The bacterium has been identified as a Gram negative, Enterobacter cloacae based on biochemical characteristics and 16S rRNA gene analysis. TOF-SIMS and ICP-MS analyses confirmed intracellular accumulation of chromium and thus its removal from the contaminated liquid medium. Chromium accumulation in cells was 320 µg/g of cells dry biomass after 120-h exposure, and thus it reduced the chromium concentration in the liquid medium by as much as 81%. Environmental scanning electron micrograph revealed the effect of metals on cellular morphology of the isolates. Altogether, our results indicate that B2-DHA has the potential to reduce chromium significantly to safe levels from the contaminated environments and suggest the potential use of this bacterium in reducing human exposure to chromium, hence avoiding poisoning.

Data in support of the comparative genome analysis of Lysinibacillus B1-CDA, a bacterium that accumulates arsenics

This study is a part of our long term project on bioremediation of toxic metals and other pollutants for protection of human health and the environment from severe contamination. The information and results presented in this data article are based on both in vitro and in silico experiments. in vitro experiments were used to investigate the presence of arsenic responsive genes in a bacterial strain B1-CDA that is highly resistant to arsenics. However, in silico studies were used to annotate the function of the metal responsive genes. By using this combined study consisting of in vitro and in silico experiments we have identified and characterized specific genes from B1-CDA that can be used as a potential tool for removal of arsenics as well as other heavy metals from the contaminated environment.

Complete Genome Sequence of Lysinibacillus sphaericus B1-CDA, a Bacterium That Accumulates Arsenic

ABSTRACT Here, we report the genomic sequence and genetic composition of an arsenic-resistant bacterium, Lysinibacillus sphaericus B1-CDA. Assembly of the sequencing reads revealed that the genome size is ~4.5 Mb, encompassing ~80% of the chromosomal DNA.

Complete Genome Sequence of Enterobacter cloacae B2-DHA, a Chromium-Resistant Bacterium

ABSTRACT Previously, we reported a chromium-resistant bacterium, Enterobacter cloacae B2-DHA, isolated from the landfills of tannery industries in Bangladesh. Here, we investigated its genetic composition using massively parallel sequencing and comparative analysis with other known Enterobacter genomes. Assembly of the sequencing reads revealed a genome of ~4.21 Mb in size.