Noordin Ahmad

Maximal service area problem for optimal siting of emergency facilities

Geographic information systems (GIS) have been integrated to many applications in facility location problems today. However, there are still some GIS capabilities yet to be explored thoroughly. This study utilizes the capability of GIS to generate service areas as the travel time zones in a facility location model called the maximal service area problem (MSAP). The model is addressed to emergency facilities for which accessibility is an important requirement. The objective of the MSAP is to maximize the total service area of a specified number of facilities. In the MSAP, continuous space is deemed as the demand area, thus the optimality was measured by how large the area could be served by a set of facilities. Fire stations in South Jakarta, Indonesia, were chosen as a case study. Three heuristics, genetic algorithm (GA), tabu search (TS) and simulated annealing (SA), were applied to solve the optimization problem of the MSAP. The final output of the study shows that the three heuristics managed to provide better coverage than the existing coverage with the same number of fire stations within the same travel time. GA reached 82.95% coverage in 50.60 min, TS did 83.20% in 3.73 min, and SA did 80.17% in 52.42 min, while the existing coverage only reaches 73.82%.

SOA of Smart City Geospatial Management

The research is essentially to modularize the structure of utilities and develop a system for following up the activities electronically on the city scale. The GIS operational platform will be the base for managing the infrastructure development components with the systems interoperability for the available city infrastructure related systems. The research will develop Service Oriented Architecture (SOA) in order to geospatially manage the available city infrastructure networks. The concentration will be on the available utility networks in order to develop a comprehensive, common, standardized geospatial data models. The construction operations for the utility networks such as electricity, water, Gas, district cooling, irrigation, sewerage and communication networks; are need to be fully monitored on daily basis, in order to utilize the involved huge resources and man power where the SOA will significant value. These resources are allocated only to convey the operational status for the construction and execution sections that used to do the required maintenance. The need for a system that serving the decision makers for following up these activities with a proper geographical representation will definitely reduce the operational cost for the long term.

Improving detailed rule-based feature extraction of urban areas from WorldView-2 image and lidar data

Urbanization is commonly accepted as an important contributor to the growth of man-made structures and as a rapid convertor of natural environments to impervious surfaces. Roofs are one class of impervious surface whose materials can highly influence the quality of urban surface water. In this study, two data sources, WorldView-2 (WV-2) imagery and a combination of WV-2 and lidar data, were utilized to map intra-urban targets, with 13 classes. Images were classified using object-based image analysis. Pixel-based classifications using the support vector machine (SVM) and maximum likelihood (ML) methods were also tested for their abilities to use both lidar data and WV-2 imagery. ML and SVM classifications yielded overall accuracies of 72.46% and 75.69%, respectively. The results of these classifiers exhibited mixed pixels and salt-and-pepper effects. Spectral, spatial, and textural attributes as well as various spectral indices were employed in the object-based classification of WV-2 imagery. Feature classification of WV-2 imagery resulted in 85% overall accuracy. Lidar data were added to WV-2 imagery to assist in the spatial and spectral diversities of urban infrastructures. Classified image made from WV-2 imagery and lidar data achieved 92.84% overall accuracy. Rule-sets of these fused datasets effectively reduced the spectral variation and spatial heterogeneities of intra-urban classes, causing finer boundaries among land-cover classes. Therefore, object-based classification of WV-2 imagery and lidar data efficiently improved detailed characterization of roof types and other urban surface materials.

Ensemble machine-learning-based geospatial approach for flood risk assessment using multi-sensor remote-sensing data and GIS

ABSTRACT In this paper, an ensemble method, which demonstrated efficiency in GIS based flood modeling, was used to create flood probability indices for the Damansara River catchment in Malaysia. To estimate flood probability, the frequency ratio (FR) approach was combined with support vector machine (SVM) using a radial basis function kernel. Thirteen flood conditioning parameters, namely, altitude, aspect, slope, curvature, stream power index, topographic wetness index, sediment transport index, topographic roughness index, distance from river, geology, soil, surface runoff, and land use/cover (LULC), were selected. Each class of conditioning factor was weighted using the FR approach and entered as input for SVM modeling to optimize all the parameters. The flood hazard map was produced by combining the flood probability map with flood-triggering factors such as; averaged daily rainfall and flood inundation depth. Subsequently, the hydraulic 2D high-resolution sub-grid model (HRS) was applied to estimate the flood inundation depth. Furthermore, vulnerability weights were assigned to each element at risk based on their importance. Finally flood risk map was generated. The results of this research demonstrated that the proposed approach would be effective for flood risk management in the study area along the expressway and could be easily replicated in other areas.

A GIS-based model to analyze the spatial and temporal development of oil palm land use in Kuala Langat district, Malaysia

In Malaysia, areas under oil palm plantations have increased dramatically since the early twentieth century and have resulted in multiple conversions of land change. This paper presents a spatial and temporal model for simulation of oil palm expansion in the Kuala Langat district, Malaysia. The model is an integration of cellular automata (CA), multi-criteria evaluation (MCE), and Markov chain (MC) analysis while MCE provides transition rules of CA iterations and MC analysis assigns a transition probability to each single pixel at the time steps. Evaluation criteria consist of constraints and nine suitability factors indicating environmental and socio-economic issues of oil palm development. In the first simulation, changes of six land-cover classes were projected to the year 2008 based on transitions between 1997 and 2002. Two measures of quantity disagreement and allocation disagreement were adopted to validate model outcome. The simulation of land-cover change of the year 2020 was done based on the transition observed between 1997 and 2002 regarding the satisfactory agreement of the projection and the reference data at the first simulation. The results, based on five landscape metrics, indicated continuous spatial patterns of oil palm plantations but more fragmented spatial patterns of other land classes by the year 2020.

Combining data mining algorithm and object-based image analysis for detailed urban mapping of hyperspectral images

Abstract Image classification of roofing types, road pavements, and natural features can assist land-cover maps in further examining the effects of such features on health, pollution, and the microclimate in urban settings. Airborne hyperspectral sensors with high spectral and spatial resolutions can be employed for detailed characterization of urban areas. This study aims to develop a procedure that is instrumental for automated knowledge discovery and mapping of urban surface materials from a large feature space of hyperspectral images. Two different images over Universiti Putra Malaysia (UPM) and Kuala Lumpur (KL), Malaysia, were captured by using hyperspectral sensors with 20 and 128 bands. The images were used to explore the combined performance of a data mining (DM) algorithm and object-based image analysis (OBIA). A large number of attributes were discovered with the C4.5 DM algorithm, which also generated the classification model as a decision tree. The UPM and KL classified images achieved 93.42 and 88.36% overall accuracy. The high accuracy of object-based classification can be linked to the knowledge discovery produced by the DM algorithm. This algorithm increased the productivity of OBIA, expedited the process of attribute selection, and resulted in an easy-to-use representation of a knowledge model from a decision tree structure.

Land Use/Cover Change Detection and Urban Sprawl Analysis in Bandar Abbas City, Iran

The process of land use change and urban sprawl has been considered as a prominent characteristic of urban development. This study aims to investigate urban growth process in Bandar Abbas city, Iran, focusing on urban sprawl and land use change during 1956–2012. To calculate urban sprawl and land use changes, aerial photos and satellite images are utilized in different time spans. The results demonstrate that urban region area has changed from 403.77 to 4959.59 hectares between 1956 and 2012. Moreover, the population has increased more than 30 times in last six decades. The major part of population growth is related to migration from other parts the country to Bandar Abbas city. Considering the speed of urban sprawl growth rate, the scale and the role of the city have changed from medium and regional to large scale and transregional. Due to natural and structural limitations, more than 80% of barren lands, stone cliffs, beach zone, and agricultural lands are occupied by built-up areas. Our results revealed that the irregular expansion of Bandar Abbas city must be controlled so that sustainable development could be achieved.

Six decades of urban growth using remote sensing and GIS in the city of Bandar Abbas, Iran

Bandar Abbas is the capital city of Hormozgan province, is the south of Iran. The city has witnessed rapid growth in the last three decades, mostly because of its economic, commercial and social attractions. However, forms and operations of urban sprawl may vary in important manners according to determine geographical and historical characteristics, and these difference need to be reviewed with creation geodatabase of spatial and attribute data during past periods until now of urban formation and expansion. We implemented this research to understand Bandar Abbas city growth dynamic during last six decades using aerial photo, Remote Sensing (RS) data and Geographical Information System (GIS), to investigate its sprawl for the during six decades and to prepare a basis for urban planning and management. We calibrated it with geospatial data derived from a time series of aerial photos and satellite images. Treated remote sensing data covering the six decades were used to calculate land use/cover and urban growth. The application of classification techniques to the remote sensing data enabled the extraction of eight main types of land use: agricultural, barren, coastal, hole, river, rocky hill, urban, and built-up. Growth was calculated through Shannons entropy model. The urbanized area increased from 403.77 ha to 4959.59 ha from 1956 to 2012, a rate almost five times that of the population growth observed in the same period. Such findings make the case of Bandar Abbas important for several reasons. First, Bandar Abbas has undergone a rapid increase in urban sprawl according to urban growth indicators. Second, the urban sprawl quickly grew from medium-sized to large a process considered inappropriate according to physical and structural limitations on urban growth. Lastly, the excessive extension of the built-up boundary in the city resulted in the loss of coastal land and open space, two main sources of tourist attraction and economic sustainable development.

Mapping rubber trees based on phenological analysis of Landsat time series data-sets

Abstract This study proposes a strategy for accurate mapping of rubber trees through the analysis of Landsat time series datasets. The phenological dynamics of rubber trees were derived from the Normalized Difference Vegetation Index (NDVI) to verify the three important phenological metrics of rubber trees; defoliation, foliation and their growing stages. A decade (2006–2015) ago, Landsat time series NDVIs were used to study the strength of relationship between rubber trees, evergreen trees and oil palm trees. Two important results that could discriminate these three types of vegetation were found; firstly, a weak relationship of NDVIs between rubber trees and evergreen trees during the defoliation period (r2 = 0.1358) and secondly between rubber trees and oil palm trees during the growing period (r2 = 0.2029). This analysis was verified using Support Vector Machine to map the distribution of the three types of vegetation. An accurate mapping strategy of rubber trees was successfully formulated.

Landslide susceptibility mapping using decision-tree based CHi-squared automatic interaction detection (CHAID) and Logistic regression (LR) integration

This article uses methodology based on chi-squared automatic interaction detection (CHAID), as a multivariate method that has an automatic classification capacity to analyse large numbers of landslide conditioning factors. This new algorithm was developed to overcome the subjectivity of the manual categorization of scale data of landslide conditioning factors, and to predict rainfall-induced susceptibility map in Kuala Lumpur city and surrounding areas using geographic information system (GIS). The main objective of this article is to use CHi-squared automatic interaction detection (CHAID) method to perform the best classification fit for each conditioning factor, then, combining it with logistic regression (LR). LR model was used to find the corresponding coefficients of best fitting function that assess the optimal terminal nodes. A cluster pattern of landslide locations was extracted in previous study using nearest neighbor index (NNI), which were then used to identify the clustered landslide locations range. Clustered locations were used as model training data with 14 landslide conditioning factors such as; topographic derived parameters, lithology, NDVI, land use and land cover maps. Pearson chi-squared value was used to find the best classification fit between the dependent variable and conditioning factors. Finally the relationship between conditioning factors were assessed and the landslide susceptibility map (LSM) was produced. An area under the curve (AUC) was used to test the model reliability and prediction capability with the training and validation landslide locations respectively. This study proved the efficiency and reliability of decision tree (DT) model in landslide susceptibility mapping. Also it provided a valuable scientific basis for spatial decision making in planning and urban management studies.