Norashikin Ab. Aziz

Optimization of spray drying parameters for pink guava powder using RSM

The optimization of pink guava was executed using central composite face-centred design to optimize the spray drying parameters of inlet temperature, maltodextrin concentration (MDC) and feed flow (FF). The experimental results were significantly (p<0.01) fitted into second-order polynomial models to describe and predict the response quality in terms of the final moisture, particle size and lycopene with R2 of 0.9749, 0.9616, and 0.9505, respectively. The final moisture content significantly (p<0.01) decreased with increasing inlet temperature and MDC, whereas the particle size increased. In contrast, the lycopene content significantly (p<0.01) decreased with the higher temperature and increased with increasing MDC. However, according to multiple response optimization, the optimum conditions of 150°C inlet temperature, 17.12% (w/v) MDC and 350 mL/h FF-predicted 3.10% moisture content, 11.23 μm particle size and 58.71 mg/100 g lycopene content. The experimental observation satisfied the predicted model within the acceptable range of the responses.

Optimisation of freeze drying conditions for purified serine protease from mango (Mangifera indica Cv. Chokanan) peel

This study investigated the possible relationship between the encapsulation variables, namely serine protease content (9-50mg/ml, X1), Arabic gum (0.2-10%(w/w), X2), maltodextrin (2-5%(w/w), X3) and calcium chloride (1.3-5.5%(w/w), X4) on the enzymatic properties of encapsulated serine protease. The study demonstrated that Arabic gum, maltodextrin and calcium chloride, as coating agents, protected serine protease from activity loss during freeze-drying. The overall optimum region resulted in a suitable freeze drying condition with a yield of 92% for the encapsulated serine protease, were obtained using 29.5mg/ml serine protease content, 5.1%(w/w) Arabic gum, 3.5%(w/w) maltodextrin and 3.4%(w/w) calcium chloride. It was found that the interaction effect of Arabic gum and calcium chloride improved the serine protease activity, and Arabic gum was the most effective amongst the examined coating agents. Thus, Arabic gum should be considered as potential protection in freeze drying of serine protease.

A conceptual design of fouling deposit adhesiveness gauge

Fouling deposit is an unwanted layer that forms in most of the processing equipment. It affects the product quality, economics and plant efficiency. Information on interfacial forces between fouling deposit and equipment surface is essential for finding optimum cleaning. The objective of this work is to provide a conceptual design of a prototype for a gauge that can measure the adhesiveness of fouling deposit to the stainless steel surface. In this work drag force concept is applied and it is assumed proportional to the magnitude of the adhesion strength of the fouling deposit to the stainless surface. This design will allow non-invasive measurement.