Noriya Okanouchi

Stir bar sorptive extraction with in situ derivatization and thermal desorption–gas chromatography–mass spectrometry in the multi-shot mode for determination of estrogens in river water samples

A novel method for the trace analysis of natural and synthetics estrogens, such as estrone (E1), 17beta-estradiol (E2) and 17alpha-ethynylestradiol (EE), in river water sample was developed, which involved stir bar sorptive extraction (SBSE) with in situ derivatization followed by thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). The derivatization conditions with acetic acid anhydride and the SBSE conditions such as sample volume and extraction time were investigated. In addition, the single and multi-shot modes in TD were investigated. The detection limits of E1, E2 and EE in river water sample were 0.2, 0.5 and 1 pg ml(-1) (ppt), respectively, in the multi-shot mode using five stir bars. The calibration curves for E1, E2 and EE were linear and had correlation coefficients >0.99. The average recoveries of E1, E2 and EE from all sample volumes were higher than 90% (R.S.D. < 10%) with correction using an added surrogate standard such as estrone-13C4, 17beta-estradiol-13C4 or 17alpha-ethynylestradiol-13C4. This simple, accurate, sensitive and selective analytical method may be applicable to the determination of trace amounts of estrogens in water samples.

Miniaturized hollow fiber assisted liquid-phase microextraction with in situ derivatization and gas chromatography–mass spectrometry for analysis of bisphenol A in human urine sample

A new method that involves miniaturized hollow fiber assisted liquid-phase microextraction (HF-LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) is described for the determination of trace amounts of bisphenol A (BPA) in human urine samples. The detection limit and the quantification limit of BPA in human urine sample are 0.02 and 0.1 ng ml(-1) (ppb), respectively. The calibration curve for BPA is linear with a correlation coefficient of >0.999 in the range of 0.1-50 ng ml(-1). The average recoveries of BPA in human urine samples spiked with 1 and 5 ng ml(-1) BPA are 101.0 (R.S.D.: 6.7%) and 98.8 (R.S.D.: 1.8%), respectively, with correction using the added surrogate standard, bisphenol A-(13)C12. This simple, accurate, sensitive and selective analytical method can be applicable to the determination of trace amounts of BPA in human urine samples.

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry.

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.

Hollow-fiber-supported liquid phase microextraction with in situ derivatization and gas chromatography–mass spectrometry for determination of chlorophenols in human urine samples

A simple and highly sensitive method that involves hollow-fiber-supported liquid phase microextraction (HF-LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) was developed for the determination of chlorophenols (CPs) such as 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TrCP), 2,3,4,6-tetrachlorophenol (TeCP) and pentachlorophenol (PCP) in human urine samples. Human urine samples were enzymatically de-conjugated with beta-glucuronidase and sulfatase. After de-conjugation, HF-LPME with in situ derivatization was performed. After extraction, 2 microl of extract was carefully withdrawn into a syringe and injected into the GC-MS system. The limits of detection (S/N=3) and quantification (S/N>10) of CPs in the human urine samples are 0.1-0.2 ng ml(-1) and 0.5-1 ng ml(-1), respectively. The calibration curve for CPs is linear with a correlation coefficient of >0.99 in the range of 0.5-500 ng ml(-1) for DCP and TrCP, and of 1-500 ng ml(-1) for TeCP and PCP, respectively. The average recoveries of CPs (n=6) in human urine samples are 81.0-104.0% (R.S.D.: 1.9-6.6%) with correction using added surrogate standards. When the proposed method was applied to human urine samples, CPs were detected at sub-ng ml(-1) level.

Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample.

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10 mL water sample and stirring is carried out for 120 min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5 ng L(-1) (ppt). The method shows linearity over the calibration range (0.02-20 microg L(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.

Stir bar sorptive extraction with in situ derivatization and thermal desorption–gas chromatography–mass spectrometry for trace analysis of methylmercury and mercury(II) in water sample

A method for the trace analysis of methylmercury (MeHg) and Hg(II) in water sample was developed, which involved stir bar sorptive extraction (SBSE) with in situ alkylation with sodium tetraethylborate and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). The limits of quantification of MeHg and Hg(II) are 20 and 10 ng L(-1) (Hg), respectively. The method shows good linearity and the correlation coefficients are higher than 0.999. The average recoveries of MeHg and Hg(II) in tap or river water sample are 102.1-104.3% (R.S.D.: 7.0-8.9%) and 105.3-106.2% (R.S.D.: 7.4-8.5%), respectively. This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of MeHg and Hg(II) in tap and river water samples.

Determination of urinary triclosan by stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry

We have developed an analytical method for the determination of urinary 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan), which utilizes stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). Human urine sample is de-conjugated by treatment with beta-glucuronidase and sulfatase. A stir bar coated with polydimethylsiloxane (PDMS) is added to the urine sample in a vial and the sample is stirred for 60 min at room temperature (25 degrees C). Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 0.05 ng mL(-1). The method shows linearity over the calibration range (0.1-10 ng mL(-1)) and the correlation coefficient (r) is higher than 0.993 for triclosan standard solution. The average recoveries of triclosan in human urine sample are 102.8-113.1% (RSD: 2.4-6.7%). This simple, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in human urine samples.