O. Frazão

All-fiber Mach-Zehnder curvature sensor based on multimode interference combined with a long-period grating

A novel Mach-Zehnder interferometer based on a fiber multimode interference structure combined with a long-period fiber grating (LPG) is proposed. The multimode interference is achieved through the use of a MMF section spliced between two single-mode fibers, with a length adjusted to couple a fraction of light into the cladding modes. A LPG placed after the MMF couples light back into the fiber core, completing the Mach-Zehnder interferometer. This novel configuration was demonstrated as a bending sensor.

Simultaneous Measurement for Strain and Temperature Based on a Long-Period Grating Combined With a High-Birefringence Fiber Loop Mirror

This work presents an alternative solution for simultaneous measurement of strain and temperature. The sensing head is formed by a long-period fiber grating combined with a high-birefringence fiber loop mirror resulting in a configuration capable of temperature and strain discrimination. These optical devices have opposite sensitivity responses when a variation of temperature and/or strain is applied. Maximum errors of plusmn0.8degC and plusmn21muepsiv are reported over 60 degC and 700-muepsiv measurement ranges, respectively

Temperature-Independent Strain Sensor Based on a Hi-Bi Photonic Crystal Fiber Loop Mirror

This work presents an optical sensor based on a highly birefringent photonic crystal fiber (Hi-Bi PCF) loop mirror. The length of the sensing head is 380 mm and its corresponding wavelength spacing between two interferometer minima is 8 nm. The optical sensor was characterized in strain and in temperature with an uncoated Hi-Bi PCF and with an acrylate coated Hi-Bi PCF. Different results for strain and temperature sensitivity were obtained. Relatively to the strain measurement, the sensor with the uncoated Hi-Bi PCF presents slightly less sensitivity (1.11 ) when compared with coated Hi-Bi PCF (1.21 ). For the temperature measurement and with the uncoated Hi-Bi PCF, the optical sensor is insensitive to temperature (0.29 pm/K).

Optical inclinometer based on a single long-period fiber grating combined with a fused taper

A new concept to measure rotation angles based on a fiber-optic modal Mach-Zehnder interferometer is demonstrated by using a nonadiabatic taper cascaded with a long-period fiber grating. Information about the magnitude of the rotation angle can be obtained from the measurement of the interference pattern visibility, and under certain conditions it is also possible to obtain the sign of the rotation angle from the induced phase variation in the fiber interferometer.

Applications of Fiber Optic Grating Technology to Multi-Parameter Measurement

Abstract In this article, approaches reported in the literature for multi-parameter measurement relying on fiber grating technology are reviewed. Due to its importance, the particular case of temperature/strain simultaneous measurement is addressed in further detail, as well as the techniques and sensing heads for temperature-independent strain measurement. Specific criteria are also proposed for sensing head classification in the context of multi-parameter measurement.

Discrimination of strain and temperature using Bragg gratings in microstructured and standard optical fibres

In this work two sensing heads based on fibre Bragg grating structures are demonstrated, one for temperature independent measurement of strain and the other for simultaneous measurement of these two parameters. The first one relies on a single Bragg grating inscription in a microstructured optical fibre, resulting for two input orthogonal polarizations in two distinct resonance peaks with similar temperature sensitivities and different strain sensitivities. In the second structure two gratings were considered, one written in the same microstructured fibre and the other on a standard SMF fibre. Considerably different strain and temperature sensitivities were obtained for these two gratings, enabling simultaneous temperature and strain measurement with resolutions of ±1.5 °C and ±10.7 µe over a measurement range of 100 °C and 2000 µe, respectively.

Simultaneous measurement of multiparameters using a Sagnac interferometer with polarization maintaining side-hole fiber

A Sagnac interferometer with a section of a polarization maintaining side-hole fiber for multiparameter measurement is proposed. The sensor was experimentally demonstrated to be sensitive to torsion, temperature, and longitudinal strain, simultaneously. The birefringence in the investigated side-hole fiber is induced simultaneously by the elliptical shape of a germanium-doped core and by field overlap with the air holes surrounding the core. The latter effect is purely geometrical and causes high chromatic dispersion of the group birefringence in the long wavelength range, which results in a different period of spectral interference fringes. A different wavelength response is obtained for each interference fringe peak when the fiber is subjected to torsion, temperature, or longitudinal strain. A matrix equation for simultaneous measurement of the three parameters--torsion, temperature, and longitudinal strain--is also proposed.

A Review of Palladium-Based Fiber-Optic Sensors for Molecular Hydrogen Detection

Palladium-based fiber-optic sensors have been one of the most promising configurations for hydrogen sensing. In the latest decade, fiber-optic sensors have indeed earned a strong interest owing to their ability to monitor molecular hydrogen at specific spatial points-either as a sensing tip device or in large areas via multiple sensing regions distributed along the optical fiber. This review focuses on the various types of optical fiber hydrogen sensors, containing specifically palladium as active element. Three distinct working principles are described, viz. interferometric-, in tensity-, and fiber grating-based sensors; their characteristics and sensing performances are critically overviewed.

Modal interferometer based on hollow-core photonic crystal fiber for strain and temperature measurement

In this work, sensitivity to strain and temperature of a sensor relying on modal interferometry in hollow-core photonic crystal fibers is studied. The sensing structure is simply a piece of hollow-core fiber connected in both ends to standard single mode fiber. An interference pattern that is associated to the interference of light that propagates in the hollow core fundamental mode with light that propagates in other modes is observed. The phase of this interference pattern changes with the measurand interaction, which is the basis for considering this structure for sensing. The phase recovery is performed using a white light interferometric technique. Resolutions of +/- 1.4 microepsilon and +/- 0.2 degrees C were achieved for strain and temperature, respectively. It was also found that the fiber structure is not sensitive to curvature.

Optical flowmeter using a modal interferometer based on a single nonadiabatic fiber taper

A novel in-fiber modal interferometer is presented that is based on a nonadiabatic biconical fused taper that couples light between the cladding and the core, combined with the Fresnel reflection at the fiber end. It is observed that the returned light from this fiber structure shows a channeled spectrum similar to that of a two-wave Michelson interferometer. The application of this device as a fiber optic flowmeter sensor is demonstrated.