O. P. Shvoeva

Sorption-spectrometric determination of thorium(IV) and uranium(VI) with the reagent Arsenazo III on the solid phase of a fibrous material filled with a cation exchanger

The possibility of the use of organic reagents of the Arsenazo III group for the sorption-spectrometric determination of elements on fibrous cation-exchange materials was examined. The conditions of the sorption of Arsenazo III with the use of diphenylguanidinium chloride on the strongly acidic fibrous cation exchanger PANV-KU-2 were found. Procedures for the determination on the solid phase were developed for thorium in 7 M HNO3 in the presence of 30-fold amounts of uranium with the detection limit of thorium of 0.005 μg/mL and for uranium in 0.05 M HCl in the presence of fivefold amounts of thorium with a detection limit of uranium of 0.05 μg/mL. The conditions were found for the selective preconcentration of thorium and uranium in the presence of each other, and a procedure was developed for their separate sorption-spectrometric determination.

Determination of Lead with 4-(2-Pyridylazo)resorcinol after the Sorption of Lead as its Thiosulfate Complex on a Fibrous Sorbent Filled with AV-17

The sorption of lead from a thiosulfate solution on a fibrous material filled with AV-17 (PANF-AV-17) was studied. Lead was determined by the color reaction with 4-(2-pyridylazo)resorcinol (PAR) on the solid phase by diffuse reflectance spectrometry. Optimal conditions were selected for lead sorption (pH 4.5 ± 0.5) and determination (pH 10); the selectivity of the determination was studied. A new system Pb–thiosulfate–(PANF-AV-17)–PAR was proposed for the determination of lead on the solid phase. A procedure was developed for the determination of lead in fresh water with the detection limit 0.01 mg/L and RSD < 25%.

Test Determination of Cu(II), Ni(II), and Cr(VI) in a Single Sample

It was shown that Cr(VI), Ni(II), and Cu(II) can be simultaneously adsorbed on a solid phase consisting of two filled fibrous disks and then determined visually using organic reagents. One sorbent disk, a fibrous material filled with an AB-17 anion exchanger, was used to determine chromium by its reaction with 1,5-diphenylcarbazide. Another disk filled with an KU-2 cation exchanger was used for the simultaneous sorption of copper and nickel followed by the consecutive determination of nickel with dimethylglyoxime and copper with sodium diethyldithiocarbamate. The conditions were optimized for the determination of nickel in the presence of copper and of copper in the presence of nickel after decomposing its dimethylglyoxime complex with 1 M HCl. The detection limits were 0.02, 0.1, and 0.05 mg/L for Cr, Ni, and Cu, respectively. The time of analysis was no longer that 20 min.

Determination of Arsenic(V) as a Heteropoly Acid after Its Adsorption on a Fibrous Anion Exchanger

The conditions were found for determining arsenic(V) as a heteropoly acid after its adsorption on a fibrous anion exchanger. A blue form of a molybdoarsenic heteropoly acid formed on the adsorbent at any order of the adsorption of the reactants; however, the sensitivity of determination was higher if arsenic was adsorbed first. A detection limit of 4 ng/mL was attained using adsorption from a 100-mL portion of a test solution. The sensitivity and selectivity of the proposed method are significantly higher than those of known methods because of the preconcentration of arsenate ions on an anion exchanger as a heteropoly acid followed by the direct determination of the heteropoly acid in the solid phase.

Sorption and complexation of uranium(VI) and thorium(IV) with reagents Arsenazo III and Arsenazo M on fibrous filled sorbents

The possibility of the highly sensitive sorption-spectrometric determination of Th(IV) and U(VI) in the presence of each other on the solid phase of fibrous anion-exchange materials with Arsenazo M and Arsenazo III was examined. Polyacrylonitrile fiber filled with an exchanger AN-31, ANKB-50, or EDE-10p was used as the solid phase. It was demonstrated that the studied systems allow the selective determination of thorium in the presence of one-to twofold amounts of uranium. On PANV-EDE-10p with immobilized Arsenazo III, the detection limit of thorium in 2–10 M HCl is 0.002 μg/mL, and in 10 M HCl the presence of up to twofold amounts of uranium is permissible. A high sensitivity of the determination of uranium in 2–7 M HCl of 0.005 μg/mL, which has not been reported before, was attained. The time of the analysis of five or six samples is no longer than 20 min.

Adsorption and determination of bismuth with 4-(2-pyridylazo)resorcinol on a fibrous ion exchanger

The adsorption of bismuth was studied on a fibrous material filled with a Chelex 100 ion exchanger with iminodiacetic groups and a KU-2 cation exchanger, and as thiosulfate and iodide complexes on a fibrous AV-17 (PANV-AV-17) anion exchanger. Bismuth adsorbed on the solid phase was determined with 4-(2-pyridylazo)resorcinol (PAR). The optimal conditions for adsorption and determination were selected and selectivity was studied. The system bismuth-iodide-PANV-AV-17-PAR was proposed for the determination of bismuth in the solid phase. A procedure was developed for the adsorption-spectroscopic determination of 0.04–0.4 mg/L of bismuth in fresh water and urine with a detection limit of 0.03 mg/L and RSD < 20%.

Determination of vanadium(V) and chromium(VI) in a single sample on a fibrous ion exchanger disk

The determination of vanadium(V) and chromium(VI) in a single sample on a support disk was studied. Polyacrylonitrile fiber filled with an AV-17 anion exchanger was used as a solid phase. After adsorption, the elements were successively detected in the solid phase by color complexation reactions of vanadium with 8-hydroxyquinoline-5-sulfonic acid and chromium with 1.5-diphenylcarbazide. A procedure was developed for the adsorption-spectroscopic determination of 0.04–0.4 μg/mL vanadium(V) and 0.01–0.05 μm/mL chromium(VI) at V: Cr ratios of 1: 1 to 10: 1 in the dynamic mode. The limits of detections for vanadium and chromium were 0.04 and 0.005 μg/mL, respectively. It was shown that the background salt content of potable water had no appreciable effect; no preliminary sample preparation was required.

Sorption-spectroscopy determination of zirconium on a PANV-KU-2 fibrous ion exchanger using Arsenazo III

The sorption and complexation of zirconium with Arsenazo III have been studied on a polyacry-lonitrile fibrous material filled with strongly acidic KU-2 cation exchanger in strongly acidic media. The optimal conditions have been chosen for the sorption-spectrophotometric and test determination of zirconium by diffuse reflection spectroscopy or visual testing. The limit of zirconium detection is 0.02 μg/mL. The procedure was tested in the analysis of model solutions of ammonium molybdate and vanadate and copper chloride using the standard addition method.

Adsorption-spectroscopic method for multielement analysis: Determination of Cr(VI), V(V), Ni(II), and Cu(II) from one sample using a two-layer adsorbent

The possibility of preconcentrating vanadium, chromium, copper, and nickel by the simultaneous adsorption in a flow-through mode on a two-layer adsorbent and the determination of metal ions by diffuse reflectance spectroscopy was studied. The adsorbent was made of a polyacrylonitrile fiber, one layer of which was filled with an AV-17 anion exchanger (PANV-AV-17), while another layer, with a KU-2 cation exchanger (PANV-KU-2). The procedure was based on the simultaneous preconcentration of vanadium and chromium on the first disk and nickel and copper on the second disk, by pumping the analyzed solution through both disks in a flow-through cell. Then, vanadium was determined on the disk of PANV-AV-17 with 8-hydroxyquinoline-5-sulfonic acid in 0.1 M HCl; next, chromium was determined with 1,5-diphenylcarbazide; the complex of vanadium was decomposed by 0.5 M H2SO4 and ascorbic acid. In the PANV-KU-2 disk, nickel was determined with dimethylglyoxime and then copper was analyzed with sodium diethyldithiocarbamate; the complex of nickel was decomposed with 1 M HCl. The selectivity factors were determined. A procedure was developed for the dynamic adsorption-spectroscopic determination of the following elements present simultaneously (μg/mL): V, 0.01–0.05; Cr, 0.002–0.015; Ni, 0.02–0.10; and Cu, 0.02–0.15. The results of analysis of model solutions are presented for different component ratios, RSD < 20%.

Test method for the separate determination of mercury(II), cadmium, and lead in one sample on the fibrous sorbent PANV-AV-17

The sorption of Hg(II), Cd(II), and Pb(II) as anionic complexes on the solid phase of polyacrylonitrile fiber filled with the AV-17 anion exchanger from NaCl and KI solutions and their complexation with 4-(2-pyridylazo)resorcinol (PAR) and dithizone were studied. A test method was developed for the individual determination of Hg(II), Cd(II), and Pb(II) from one sample on three support disks. From the same solution, by the successive sorption on two disks from a 0.2 M NaCl solution, mercury was determined with dithizone and cadmium was determined with PAR. After the addition of a KI solution and sorption on the third disk, lead was determined with PAR. Using the added-found method, the procedure was approved in the analysis of natural sodium chloride water. The detection limit was 0.01 mg/L for Hg(II) and 0.02 mg/L for Cd(II) and Pb(II) for a volume of the analyzed sample of 25 mL. The time of the analysis of five or six samples (determination of three elements) is no longer than 50 min.