Oleg A. Mukhanov

Energy-Efficient Single Flux Quantum Technology

Figures of merit connecting processing capabilities with power dissipated (OpS/Watt, Joule/bit, etc.) are becoming dominant factors in choosing technologies for implementing the next generation of computing and communication network systems. Superconductivity is viewed as a technology capable of achieving higher energy efficiencies than other technologies. Static power dissipation of standard RSFQ logic, associated with dc bias resistors, is responsible for most of the circuit power dissipation. In this paper, we review and compare different superconductor digital technology approaches and logic families addressing this problem. We present a novel energy-efficient single flux quantum logic family, ERSFQ/eSFQ. We also discuss energy-efficient approaches for output data interface and overall cryosystem design.

Superconductor analog-to-digital converters

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Superconductor Digital-RF Receiver Systems

Digital superconductor electronics has been experiencing rapid maturation with the emergence of smaller-scale, lower-cost communications applications which became the major technology drivers. These applications are primarily in the area of wireless communications, radar, and surveillance as well as in imaging and sensor systems. In these areas, the fundamental advantages of superconductivity translate into system benefits through novel Digital-RF architectures with direct digitization of wide band, high frequency radio frequency (RF) signals. At the same time the availability of relatively small 4K cryocoolers has lowered the foremost market barrier for cryogenically-cooled digital electronic systems. Recently, we have achieved a major breakthrough in the development, demonstration, and successful delivery of the cryocooled superconductor digital-RF receivers directly digitizing signals in a broad range from kilohertz to gigahertz. These essentially hybrid-technology systems combine a variety of superconductor and semiconductor technologies packaged with two-stage commercial cryocoolers: cryogenic Nb mixed-signal and digital circuits based on Rapid Single Flux Quantum (RSFQ) technology, room-temperature amplifiers, FPGA processing and control circuitry. The demonstrated cryocooled digital-RF systems are the worlds first and fastest directly digitizing receivers operating with live satellite signals in X-band and performing signal acquisition in HF to L-band at ∼30GHz clock frequencies.

Ferromagnetic Josephson switching device with high characteristic voltage

We develop a fast magnetic Josephson junction (MJJ)—a superconducting ferromagnetic device for a scalable high-density cryogenic memory compatible in speed and fabrication with energy-efficient single flux quantum (SFQ) circuits. We present experimental results for superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs with high characteristic voltage IcRn of >700 μV proving their applicability for superconducting circuits. By applying magnetic field pulses, the device can be switched between MJJ logic states. The MJJ IcRn product is only ∼30% lower than that of conventional junction co-produced in the same process, allowing for integration of MJJ-based and SIS-based ultra-fast digital SFQ circuits operating at tens of gigahertz.

Digital Channelizing Radio Frequency Receiver

HYPRES is developing a class of digital receivers featuring direct digitization at radio frequency (RF). Such a receiver consists of a wideband analog-to-digital converter (ADC) modulator and multiple digital channelizer units to extract different frequency bands-of-interest within the broad digitized spectrum. The single-bit oversampled data, from either a lowpass delta or bandpass delta-sigma modulator, are applied to one or more channelizers, each comprising digital in-phase and quadrature mixers and a pair of digital decimation filters. We perform channelization in two steps, the first at full ADC sampling clock frequency with rapid single flux quantum (RSFQ) digital circuits and the second at reduced (decimated) clock frequency with commercial field programmable gate array (FPGA) chips at room temperature. We have demonstrated lowpass and bandpass digital receivers by integrating an ADC modulator and a channelizer unit on the same chip at clock frequencies up to 20 GHz. These 1-cm2 single-chip digital-RF receivers contain over 10,000 Josephson junctions. The channelizing receiver approach can be extended to include multiple ADC modulators and multiple channelizer units on a multi-chip module.

Rapid single flux quantum (RSFQ) shift register family

The author presents the design and test results for a novel, buffered RSFQ shift register. The register design makes it possible to build a circular 64-b shift register which is insensitive to the clock pulse direction within the experimentally measured DC bias margin of +or-15%. The implementation of a large variety of unidirectional shift registers using either a buffered or a two-Josephson-junction cell design confirms an expected wide DC bias margin of +or-30% (for a 32-b) and high speed, up to 60 GHz (for a 4-b register). Among these circuits is a 256-b shift register. To the authors knowledge, this is the largest RSFQ circuit (533 junctions) reported to date. This shift register was tested to have a DC bias margin of +or-6% and proper high-speed operation up to 12 GHz.<<ETX>>

Superconductivity and the environment: a Roadmap

There is universal agreement between the United Nations and governments from the richest to the poorest nations that humanity faces unprecedented global challenges relating to sustainable energy, clean water, low-emission transportation, coping with climate change and natural disasters, and reclaiming use of land. We have invited researchers from a range of eclectic research areas to provide a Roadmap of how superconducting technologies could address these major challenges confronting humanity.Superconductivity has, over the century since its discovery by Kamerlingh Onnes in 1911, promised to provide solutions to many challenges. So far, most superconducting technologies are esoteric systems that are used in laboratories and hospitals. Large science projects have long appreciated the ability of superconductivity to efficiently create high magnetic fields that are otherwise very costly to achieve with ordinary materials. The most successful applications outside of large science are high-field magnets for magnetic resonance imaging, laboratory magnetometers for mineral and materials characterization, filters for mobile communications, and magnetoencephalography for understanding the human brain.The stage is now set for superconductivity to make more general contributions. Humanity uses practically unthinkable amounts of energy to drive our modern way of life. Overall, global power usage has been predicted to almost double from 16.5 to 30?TW in the next four decades (2011 Equinox Summit: Energy 2030 http://wgsi.org/publications-resources).The economy with which electrons carry energy compels the continued quest for efficient superconducting power generation, energy storage, and power transmission. The growing global population requires new arable land and treatment of water, especially in remote areas, and superconductivity offers unique solutions to these problems. Exquisite detectors give warning of changes that are otherwise invisible. Prediction of climate and disasters will be helped by future supercomputer technologies that support huge amounts of data and sophisticated modeling, and with the aid of superconductivity these systems might not require the energy of a large city.We present different sections on applications that could address (or are addressing) a range of environmental issues. The Roadmap covers water purification, power distribution and storage, low-environmental impact transport, environmental sensing (particularly for the removal of unexploded munitions), monitoring the Earth?s magnetic fields for earthquakes and major solar activity, and, finally, developing a petaflop supercomputer that only requires 3% of the current supercomputer power provision while being 50 times faster.Access to fresh water. With only 2.5% of the water on Earth being fresh and climate change modeling forecasting that many areas will become drier, the ability to recycle water and achieve compact water recycling systems for sewage or ground water treatment is critical. The first section (by Nishijima) points to the potential of superconducting magnetic separation to enable water recycling and reuse.Energy. The Equinox Summit held in Waterloo Canada 2011?(2011 Equinox Summit: Energy 2030 http://wgsi.org/publications-resources) identified electricity use as humanity?s largest contributor to greenhouse gas emissions. Our appetite for electricity is growing faster than for any other form of energy. The communiqu? from the summit said ?Transforming the ways we generate, distribute and store electricity is among the most pressing challenges facing society today?. If we want to stabilize CO2 levels in our atmosphere at 550 parts per million, all of that growth needs to be met by non-carbon forms of energy? (2011 Equinox Summit: Energy 2030 http://wgsi.org/publications-resources). Superconducting technologies can provide the energy efficiencies to achieve, in the European Union alone, 33?65% of the required reduction in greenhouse gas emissions according to the Kyoto Protocol (Hartikainen et?al 2003 Supercond. Sci. Technol. 16 963). New technologies would include superconducting energy storage systems to effectively store power generation from renewable sources as well as high-temperature superconducting systems used in generators, transformers and synchronous motors in power stations and heavy-industry facilities. However, to be effective, these systems must be superior to conventional systems and, in reality, market penetration will occur as existing electrical machinery is written off. At current write-off rates, to achieve a 50% transfer to superconducting systems will take 20?years (Hartikainen et?al 2003 Supercond. Sci. Technol. 16 963).The Roadmap next considers dc transmission of green power with a section by Eckroad and Marian who provide an update on the development of superconducting power transmission lines in view of recent sustainability studies. The potential of magnetic energy storage is then presented by Coi and Kim, who argue that a successful transition to wind and solar power generation must be harmonized with the conventional electrical network, which requires a storage technology with a fast response and long backup times.Transport. Superconducting Maglev trains and motors for international shipping have the potential to considerably reduce the emissions that contribute to greenhouse gases while improving their economic viability by reducing losses and improving efficiencies. International shipping, alone, contributes 3% of the greenhouse gas emissions. Three sections of the Roadmap identify how high-speed rail can be a major solution to providing fast, low energy, environmentally-friendly transport enabling reduction in automobile and aircraft travel by offering an alternative that is very competitive. With maritime international environmental regulations tightening, HTS motors with the characteristics of high torque and compactness will become important devices for high-performance and low-emission electric ship propulsion systems. A section on the development of a megawatt-class superconducting motor for ship propulsion is presented by Umemoto.Monitoring in manufacturing for waste reduction. Environmental impact from the waste created by the manufacturing sector and the need to make manufacturing efficient can be addressed by terahertz imaging. This technology has great potential in non-destructive testing, industrial process monitoring and control to greatly improve the industry process efficiency and reliability by reducing waste materials and toxic by-products. The section by Du shows how terahertz imaging can provide process and property information such as rust levels under paint that can assist with the reduction of waste in manufacturing and maintenance.Monitoring for naturally occurring disturbances. The environmental and social impact of natural disasters is mounting. Febvre provides the Roadmap for the use of ultra-sensitive magnetometry to understand geomagnetic phenomena and Earth?ionosphere couplings through the study of very small variations of the magnetic field. This magnetic monitoring has many implications for understanding our environment and providing new tools for early warning of natural hazards, either on Earth or in space which will enable us to be better prepared for natural disasters.Restoring environments after military use. Throughout the world, there are many areas confirmed or suspected of being contaminated by unexploded munitions known as unexploded ordnance (UXO). Its presence is the result of wars and training of military forces. Areas affected by UXO contamination are hazardous to the public and have a major influence on the nature of land use. UXO has impact in developed as well as developing nations. For example, the USA has UXO dating back to the American Civil War and countries such as Cambodia are living with landmines as a daily issue due to more recent wars. Underwater UXO has caused severe impacts such as the explosion in 1969 in the waters of Kent in the UK that caused a reading of 4.5 on the Richter scale for earthquake monitors. Another example was a land-based detonation of a 500?kg World War II bomb in Germany killing three people in 2010. There is countless UXO from recent conflicts worldwide. Detection and accurate location with 100% reliability is required to return land to safe civilian use. Keenan provides details of a prototype magnetic gradiometer developed for this purpose.Reducing power needs for high-end IT. Supercomputers are so large that they are close to requiring their own small power plant to support the energy needed to run the computer. For example, in 2011 Facebook data centers and operations used 532 million kW hours of energy. Mukhanov explores the potential of reducing the power dissipation for future supercomputers from more than 500?MW for Exascale systems to 0.2?MW by using superconducting-ferromagnetic Josephson junctions for magnetic memory and programmable logic.Clearly superconductivity is an ultimate energy-saving technology, and its practical implementation will contribute to the reduction of CO2 emissions, improved water purification, reduction of waste and timely preparedness for natural disasters or significant events. This Roadmap shows how the application of superconducting technologies will have a significant impact when they are adopted.

Implementation of a FFT radix 2 butterfly using serial RSFQ multiplier-adders

We have designed a Decimation-in-Time (DIT) radix 2 butterfly integrated circuit. This circuit will be used to implement the 32-point Fast Fourier Transform (FFT) in a parallel data flow architecture. The radix 2 butterfly circuit uses serial RSFQ math and consists of four single bit-wide serial multipliers and eight carry-save serial adders. The circuit with 16-bit word-length employs only 3400 junctions, occupies an area of 3.8/spl times/2.0 mm/sup 2/, and dissipates less than 1.1 mW power. The multiplier is implemented using the unique RSFQ bit-clock-pipelined schema. We have successfully tested a library of serial multiply-add elements: the 8-bit multiplier at 6.3 GHz and adders with dc bias margin /spl plusmn/20%. Finally, we have demonstrated full operation of the radix 2 butterfly chip with 5-bit word length.<<ETX>>

High-resolution ADC operation up to 19.6 GHz clock frequency

We have designed, fabricated and tested the second-generation (2G) design of a high-resolution, dynamically programmable analog-to-digital converter (ADC) for radar and communications applications. The ADC chip uses the phase modulation–demodulation architecture and on-chip digital filtering. The 2G ADC design has been substantially enhanced. Both ADC front-end modulator and demodulator, as well as decimation digital filter, have been redesigned for operation at 20 GHz. Test results of this 6000 Josephson junction 2G ADC chip at clock frequencies up to 19.6 GHz are described. These test results were compared to the results of ADC functional simulation using MATLAB.

Advanced on-chip test technology for RSFQ circuits

We have developed an advanced version of on-chip test system with new high-speed clock generation and control. For high-speed clock generation, a novel wide-bandwidth ring generator is designed using circular Josephson transmission lines with an inductively coupled trigger. The generator is capable of producing SFQ clock pulses in the range of from 15 to 55 GHz using a 1 kA/cm/sup 2/ Nb fabrication process. For clock control, we have designed two different types of clock-controller circuits based on programmable shift-register and counter. Using the on-chip test system, we have successfully tested a parallel multiplier module up to 15 GHz with 16% dc bias margins.