Oriol Blázquez

Charge transport and electroluminescence of silicon nanocrystals/SiO2 superlattices

Charge transport and electroluminescence mechanisms in Si-rich Si oxynitride/silicon oxide (SRON/SiO2) superlattices deposited on p-type Si substrate are reported. The superlattice structures were deposited by plasma-enhanced chemical-vapor deposition and subsequently annealed at 1150 °C to precipitate and crystallize the Si excess into Si nanocrystals. The dependence of the electrical conduction on the applied voltage and temperature was found to be well described by a Poole-Frenkel transport mechanism over a wide voltage range. On the other hand, the observed dependence of the electroluminescence on the SRON layer thickness is a clear proof of quantum confinement and was attributed to an excitonic radiative recombination taking place in the confined states within the Si quantum dots. A model is proposed based on thermal hopping of electrons between the quantum dots acting as trap states (Poole-Frenkel). A correlation between carrier transport and electroluminescence has been established considering impa...

Organosilane-functionalization of nanostructured indium tin oxide films

Fabrication and organosilane-functionalization and characterization of nanostructured ITO electrodes are reported. Nanostructured ITO electrodes were obtained by electron beam evaporation, and a subsequent annealing treatment was selectively performed to modify their crystalline state. An increase in geometrical surface area in comparison with thin-film electrodes area was observed by atomic force microscopy, implying higher electroactive surface area for nanostructured ITO electrodes and thus higher detection levels. To investigate the increase in detectability, chemical organosilane-functionalization of nanostructured ITO electrodes was performed. The formation of 3-glycidoxypropyltrimethoxysilane (GOPTS) layers was detected by X-ray photoelectron spectroscopy. As an indirect method to confirm the presence of organosilane molecules on the ITO substrates, cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were also carried out. Cyclic voltammograms of functionalized ITO electrodes presented lower reduction-oxidation peak currents compared with non-functionalized ITO electrodes. These results demonstrate the presence of the epoxysilane coating on the ITO surface. EIS showed that organosilane-functionalized electrodes present higher polarization resistance, acting as an electronic barrier for the electron transfer between the conductive solution and the ITO electrode. The results of these electrochemical measurements, together with the significant difference in the X-ray spectra between bare ITO and organosilane-functionalized ITO substrates, may point to a new exploitable oxide-based nanostructured material for biosensing applications. As a first step towards sensing, rapid functionalization of such substrates and their application to electrochemical analysis is tested in this work. Interestingly, oxide-based materials are highly integrable with the silicon chip technology, which would permit the easy adaptation of such sensors into lab-on-a-chip configurations, providing benefits such as reduced size and weight to facilitate on-chip integration, and leading to low-cost mass production of microanalysis systems.

Electrochemical characterization of organosilane-functionalized nanostructured ITO surfaces

The electroactivity of nanostructured indium tin oxide (ITO) has been investigated for its further use in applications such as sensing biological compounds by the analysis of redox active molecules. ITO films were fabricated by using electron beam evaporation at different substrate temperatures and subsequently annealed for promoting their crystallization. The morphology of the deposited material was monitored by scanning electron microscopy, confirming the deposition of either thin films or nanowires, depending on the substrate temperature. Electrochemical surface characterization revealed a 45 % increase in the electroactive surface area of nanostructured ITO with respect to thin films, one third lower than the geometrical surface area variation determined by atomic force microscopy. ITO surfaces were functionalized with a model organic molecule known as 6-(ferrocenyl)hexanethiol. The chemical attachment was done by means of a glycidoxy compound containing a reactive epoxy group, the so-called 3-glycido...

Memristive behaviour of Si-Al oxynitride thin films: the role of oxygen and nitrogen vacancies in the electroforming process

The resistive switching properties of silicon-aluminium oxynitride (SiAlON) based devices have been studied. Electrical transport mechanisms in both resistance states were determined, exhibiting an ohmic behaviour at low resistance and a defect-related Poole-Frenkel mechanism at high resistance. Nevertheless, some features of the Al top-electrode are generated during the initial electroforming, suggesting some material modifications. An in-depth microscopic study at the nanoscale has been performed after the electroforming process, by acquiring scanning electron microscopy and transmission electron microscopy images. The direct observation of the devices confirmed features on the top electrode with bubble-like appearance, as well as some precipitates within the SiAlON. Chemical analysis by electron energy loss spectroscopy has demonstrated that there is an out-diffusion of oxygen and nitrogen ions from the SiAlON layer towards the electrode, thus forming silicon-rich paths within the dielectric layer and indicating vacancy change to be the main mechanism in the resistive switching.

Modulation of the electroluminescence emission from ZnO/Si NCs/p-Si light-emitting devices via pulsed excitation

In this work, the electroluminescence (EL) emission of zinc oxide (ZnO)/Si nanocrystals (NCs)-based light-emitting devices was studied under pulsed electrical excitation. Both Si NCs and deep-level ZnO defects were found to contribute to the observed EL. Symmetric square voltage pulses (50-μs period) were found to notably enhance EL emission by about one order of magnitude. In addition, the control of the pulse parameters (accumulation and inversion times) was found to modify the emission lineshape, long inversion times (i.e., short accumulation times) suppressing ZnO defects contribution. The EL results were discussed in terms of the recombination dynamics taking place within the ZnO/Si NCs heterostructure, suggesting the excitation mechanism of the luminescent centers via a combination of electron impact, bipolar injection, and sequential carrier injection within their respective conduction regimes.

Structural and optical properties of Al-Tb/SiO2 multilayers fabricated by electron beam evaporation

Light emitting Al-Tb/SiO2 nanomultilayers (NMLs) for optoelectronic applications have been produced and characterized. The active layers were deposited by electron beam evaporation onto crystalline silicon substrates, by alternatively evaporating nanometric layers of Al, Tb, and SiO2. After deposition, all samples were submitted to an annealing treatment for 1 h in N2 atmosphere at different temperatures, ranging from 700 to 1100 °C. Transmission electron microscopy confirmed the NML structure quality, and by complementing the measurements with electron energy-loss spectroscopy, the chemical composition of the multilayers was determined at the nanoscopic level. The average composition was also measured by X-ray photoelectron spectroscopy (XPS), revealing that samples containing Al are highly oxidized. Photoluminescence experiments exhibit narrow emission lines ascribed to Tb3+ ions in all samples (both as-deposited and annealed ones), together with a broadband related to SiO2 defects. The Tb-related emiss...

Investigating the electro-optical properties of non-stoichiometric silicon nitride thin films for photovoltaic applications

The electro-optical properties of devices containing Si-rich silicon nitride (SRN) thin films, deposited by means of low-pressure chemical-vapor deposition (LPCVD), are studied. After optically evidencing the presence of defects in our films, a Poole-Frenkel conduction mechanism has been considered, which is in agreement with electrical experiments. We found that the poly-Si layer strongly modulates the electroluminescence and light absorption of the devices. In addition, they showed photocurrent and photoconductivity under illumination, SRN becoming a promising material for photovoltaic applications.