Oriol Penon

Iron oxide nanoparticles functionalized with novel hydrophobic and hydrophilic porphyrins as potential agents for photodynamic therapy

The preparation of novel porphyrin derivatives and their immobilization onto iron oxide nanoparticles to build up suitable nanotools for potential use in photodynamic therapy (PDT) has been explored. To achieve this purpose, a zinc porphyrin derivative, ZnPR-COOH, has been synthesized, characterized at the molecular level and immobilized onto previously synthesized iron oxide nanoparticles covered with oleylamine. The novel nanosystem (ZnPR-IONP) has been thoroughly characterized by a variety of techniques such as UV-Vis absorption spectroscopy, fluorescence spectroscopy, X-ray photoloectron spectroscopy (XPS) and transmission electron microscopy (TEM). In order to probe the capability of the photosensitizer for PDT, the singlet oxygen production of both ZnPR-IONP and the free ligand ZnPR-COOH have been quantified by measuring the decay in absorption of the anthracene derivative 9,10-anthracenedipropionic acid (ADPA), showing an important increase on singlet oxygen production when the porphyrin is incorporated onto the IONP (ZnPR-IONP). On the other hand, the porphyrin derivative PR-TRIS3OH, incorporating several polar groups (TRIS), was synthesized and immobilized with the intention of obtaining water soluble nanosystems (PR-TRIS-IONP). When the singlet oxygen production ability was evaluated, the values obtained were similar to ZnPR-COOH/ZnPR-IONP, again much higher in the case of the nanoparticles PR-TRIS-IONP, with more than a twofold increase. The efficient singlet oxygen production of PR-TRIS-IONP together with their water solubility, points to the great promise that these new nanotools represent for PDT.

A New Porphyrin for the Preparation of Functionalized Water-Soluble Gold Nanoparticles with Low Intrinsic Toxicity

A potential new photosensitizer based on a dissymmetric porphyrin derivative bearing a thiol group was synthesized. 5-[4-(11-Mercaptoundecyloxy)-phenyl-10,15,20-triphenylporphyrin (PR-SH) was used to functionalize gold nanoparticles in order to obtain a potential drug delivery system. Water-soluble multifunctional gold nanoparticles GNP-PR/PEG were prepared using the Brust–Schiffrin methodology, by immobilization of both a thiolated polyethylene glycol (PEG) and the porphyrin thiol compound (PR-SH). The nanoparticles were fully characterized by transmission electron microscopy and 1H nuclear magnetic resonance spectroscopy, UV/Vis absorption spectroscopy, and X-ray photoelectron spectroscopy. Furthermore, the ability of GNP-PR/PEGs to induce singlet oxygen production was analyzed to demonstrate the activity of the photosensitizer. Cytotoxicity experiments showed the nanoparticles are nontoxic. Finally, cellular uptake experiments demonstrated that the functionalized gold nanoparticles are internalized. Therefore, this colloid can be considered to be a novel nanosystem that could potentially be suitable as an intracellular drug delivery system of photosensitizers for photodynamic therapy.

Direct embryo tagging and identification system by attachment of biofunctionalized polysilicon barcodes to the zona pellucida of mouse embryos

STUDY QUESTION Is the attachment of biofunctionalized polysilicon barcodes to the outer surface of the zona pellucida an effective approach for the direct tagging and identification of cultured embryos? SUMMARY ANSWER The results achieved provide a proof of concept for a direct embryo tagging system using biofunctionalized polysilicon barcodes, which could help to minimize the risk of mismatching errors (mix-ups) in human assisted reproduction technologies. WHAT IS KNOWN ALREADY Even though the occurrence of mix-ups is rare, several cases have been reported in fertility clinics around the world. Measures to prevent the risk of mix-ups in human assisted reproduction technologies are therefore required. STUDY DESIGN, SIZE, DURATION Mouse embryos were tagged with 10 barcodes and the effectiveness of the tagging system was tested during fresh in vitro culture (n=140) and after embryo cryopreservation (n = 84). Finally, the full-term development of tagged embryos was evaluated (n =105). PARTICIPANTS/MATERIALS, SETTING, METHODS Mouse pronuclear embryos were individually rolled over wheat germ agglutinin-biofunctionalized polysilicon barcodes to distribute them uniformly around the ZONA PELLUCIDA surface. Embryo viability and retention of barcodes were determined during 96 h of culture. The identification of tagged embryos was performed every 24 h in an inverted microscope and without embryo manipulation to simulate an automatic reading procedure. Full-term development of the tagged embryos was assessed after their transfer to pseudo-pregnant females. To test the validity of the embryo tagging system after a cryopreservation process, tagged embryos were frozen at the 2-cell stage using a slow freezing protocol, and followed in culture for 72 h after thawing. MAIN RESULTS AND THE ROLE OF CHANCE Neither the in vitro or in vivo development of tagged embryos was adversely affected. The tagging system also proved effective during an embryo cryopreservation process. Global identification rates higher than 96 and 92% in fresh and frozen-thawed tagged embryos, respectively, were obtained when simulating an automatic barcode reading system, although these rates could be increased to 100% by simply rotating the embryos during the reading process. LIMITATIONS, REASONS FOR CAUTION The direct embryo tagging developed here has exclusively been tested in mouse embryos. Its effectiveness in other species, such as the human, is currently being tested. WIDER IMPLICATIONS OF THE FINDINGS The direct embryo tagging system developed here, once tested in human embryos, could provide fertility clinics with a novel tool to reduce the risk of mix-ups in human assisted reproduction technologies.

Water soluble, multifunctional antibody-porphyrin gold nanoparticles for targeted photodynamic therapy

Photodynamic therapy (PDT) is a treatment of cancer by which tumour cells are destroyed using reactive oxygen species produced by photosensitizers following activation with visible or near infrared light. Successful PDT depends on the solubility and the targeting ability of the photosensitizers. In this work, the synthesis of a porphyrin-based water soluble nanoparticle conjugate containing a targeting agent that recognizes the erbB2 receptor overexpressed on the surface of particular cancer cells is reported. The nanoparticle conjugates were synthesized following two different protocols, viz. a biphasic and a monophasic method, with the aim to determine which method yielded the optimal nanosystem for potential PDT applications. The nanoparticles were characterized using UV-Vis absorption and fluorescence spectroscopies together with transmission electron microscopy and zeta potential measurements; and their ability to produce singlet oxygen following irradiation was investigated following the decay in absorption of a singlet oxygen probe. The nanoparticles synthesized using the monophasic method were shown to produce the highest amount of singlet oxygen and were further functionalized with anti-erbB2 antibody to target the erbB2 receptors expressed on the surface of SK-BR-3 human breast cancer cells. The water soluble, antibody-porphyrin nanoparticle conjugates were shown to elicit targeted PDT of the breast cancer cells.

Optimized immobilization of lectins using self-assembled monolayers on polysilicon encoded materials for cell tagging.

Self-assembled monolayers (SAMs) have been used for the preparation of functional microtools consisting of encoded polysilicon barcodes biofunctionalized with proteins of the lectin family. These hybrid microtools exploit the lectins ability for recognizing specific carbohydrates of the cell membrane to give an efficient system for cell tagging. This work describes how the control of the methodology for SAM formation on polysilicon surfaces followed by lectin immobilization has a crucial influence on the microtool biofunction. Several parameters (silanization time, silane molar concentration, type of solvent or deposition methodology) have been studied to establish optimal function. Furthermore, silanes incorporating different terminal groups, such as aldehyde, activated ester or epoxide groups were tested in order to analyze their chemical coupling with the biomolecules, as well as their influence on the biofunctionality of the immobilized protein. Two different lectins - wheat germ agglutinin (WGA) and phytohemagglutinin (PHA-L) - were immobilized, because they have different and specific cell recognition behaviour and exhibit different cell toxicity. In this way we can assess the effect of intrinsic bulk toxicity with that of the cell compatibility once immobilized as well as the importance of cell affinity. A variety of nanometrical techniques were used to characterize the active surfaces, and lectin immobilization was quantified using ultraviolet-visible absorption spectroscopy (UV-vis) and optical waveguide light mode spectroscopy (OWLS). Once the best protocol was found, WGA and PHA were immobilized on polysilicon coded barcodes, and these microtools showed excellent cell tagging on living mouse embryos when WGA was used.

Macrocyclic ionic liquid crystals

The efficient synthesis of ionic liquid crystals with cationic groups in a cyclophane unit is described, and the striking and complementary roles of the anion and the macrocycle in the mesophase behaviour are demonstrated.

Efficient biofunctionalization of polysilicon barcodes for adhesion to the zona pellucida of mouse embryos.

Cell tracking is an emergent area in nanobiotechnology, promising the study of individual cells or the identification of populations of cultured cells. In our approach, microtools designed for extracellular tagging are prepared, because using biofunctionalized polysilicon barcodes to tag cell membranes externally avoids the inconveniences of cell internalization. The crucial covalent biofunctionalization process determining the ultimate functionality was studied in order to find the optimum conditions to link a biomolecule to a polysilicon barcode surface using a self-assembled monolayer (SAM) as the connector. Specifically, a lectin (wheat germ agglutinin, WGA) was used because of its capacity to recognize some specific carbohydrates present on the surface of most mammalian cells. Self-assembled monolayers were prepared on polysilicon surfaces including aldehyde groups as terminal functions to study the suitability of their covalent chemical bonding to WGA. Some parameters, such as the polysilicon surface roughness or the concentration of WGA, proved to be crucial for successful biofunctionalization and bioactivity. The SAMs were characterized by contact angle measurements, time-of-flight secondary ion mass spectrometry (TOF-SIMS), laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS), and atomic force microscopy (AFM). The biofunctionalization step was also characterized by fluorescence microscopy and, in the case of barcodes, by adhesion experiments to the zona pellucida of mouse embryos. These experiments showed high barcode retention rates after 96 h of culture as well as high embryo viability to the blastocyst stage, indicating the robustness of the biofunctionalization and, therefore, the potential of these new microtools to be used for cell tagging.

Barcode tagging of human oocytes and embryos to prevent mix-ups in assisted reproduction technologies

STUDY QUESTION Is the attachment of biofunctionalized polysilicon barcodes to the outer surface of the zona pellucida an effective approach for the direct tagging and identification of human oocytes and embryos during assisted reproduction technologies (ARTs)? SUMMARY ANSWER The direct tagging system based on lectin-biofunctionalized polysilicon barcodes of micrometric dimensions is simple, safe and highly efficient, allowing the identification of human oocytes and embryos during the various procedures typically conducted during an assisted reproduction cycle. WHAT IS KNOWN ALREADY Measures to prevent mismatching errors (mix-ups) of the reproductive samples are currently in place in fertility clinics, but none of them are totally effective and several mix-up cases have been reported worldwide. Using a mouse model, our group has previously developed an effective direct embryo tagging system which does not interfere with the in vitro and in vivo development of the tagged embryos. This system has now been tested in human oocytes and embryos. STUDY DESIGN, SIZE, DURATION Fresh immature and mature fertilization-failed oocytes (n = 21) and cryopreserved day 1 embryos produced by in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) (n = 205) were donated by patients (n = 76) undergoing ARTs. In vitro development rates, embryo quality and post-vitrification survival were compared between tagged (n = 106) and non-tagged (control) embryos (n = 99). Barcode retention and identification rates were also calculated, both for embryos and for oocytes subjected to a simulated ICSI and parthenogenetic activation. Experiments were conducted from January 2012 to January 2013. PARTICIPANTS/MATERIALS, SETTING, METHODS Barcodes were fabricated in polysilicon and biofunctionalizated with wheat germ agglutinin lectin. Embryos were tagged with 10 barcodes and cultured in vitro until the blastocyst stage, when they were either differentially stained with propidium iodide and Hoechst or vitrified using the Cryotop method. Embryo quality was also analyzed by embryo grading and time-lapse monitoring. Injected oocytes were parthenogenetically activated using ionomycin and 6-dimethylaminopurine. MAIN RESULTS AND THE ROLE OF CHANCE Blastocyst development rates of tagged (27/58) and non-tagged embryos (24/51) were equivalent, and no significant differences in the timing of key morphokinetic parameters and the number of inner cell mass cells were detected between the two groups (tagged: 24.7 ± 2.5; non-tagged: 22.3 ± 1.9), indicating that preimplantation embryo potential and quality are not affected by the barcodes. Similarly, re-expansion rates of vitrified-warmed tagged (19/21) and non-tagged (16/19) blastocysts were similar. Global identification rates of 96.9 and 89.5% were obtained in fresh (mean barcode retention: 9.22 ± 0.13) and vitrified-warmed (mean barcode retention: 7.79 ± 0.35) tagged embryos, respectively, when simulating an automatic barcode reading process, though these rates were increased to 100% just by rotating the embryos during barcode reading. Only one of the oocytes lost one barcode during intracytoplasmic injection (100% identification rate) and all oocytes retained all the barcodes after parthenogenetic activation. LIMITATIONS, REASONS FOR CAUTION Although the direct embryo tagging system developed is effective, it only allows the identification and traceability of oocytes destined for ICSI and embryos. Thus, the traceability of all reproductive samples (oocytes destined for IVF and sperm) is not yet ensured. WIDER IMPLICATIONS OF THE FINDINGS The direct embryo tagging system developed here provides fertility clinics with a novel tool to reduce the risk of mix-ups in human ARTs. The system can also be useful in research studies that require the individual identification of oocytes or embryos and their individual tracking. STUDY FUNDING/COMPETING INTEREST(S) This study was supported by the Sociedad Española de Fertilidad, the Spanish Ministry of Education and Science (TEC2011-29140-C03) and the Generalitat de Catalunya (2009SGR-00282 and 2009SGR-00158). The authors do not have any competing interests.

Multiply biphenyl substituted zinc(II) porphyrin and phthalocyanine as components for molecular materials

The preparation and physico-chemical characteristics of zinc(II) porphyrin and phthalocyanine derivatives with biphenyl units are reported. These compounds have been prepared as components for molecular electronics systems and rotor-based molecular machines, where the biphenyl units can act as paddles because they are oriented quasi-perpendicularly to the plane of the aromatic macrocycles which would be coordianted through the transition metal ion by an axial ligand. The minimalist design along with the absence of solubilizing groups leads to a low solubility of the compounds in organic solvents; the phthalocyanines is only sparingly soluble while the porphyrin is more easily manipulated, but in any case the concentration of both compounds is sufficient for surface deposition. The luminescence of the compounds is characteristic of the central unit, although it is clear in the absorption spectra that the phthalocyanine derivative has a particularly strong tendency to aggregate non-specifically. The porphyrin forms microcrystals while the phthalocyanines which bears eight biphenyl units forms amorphous aggregates from 1,2-dichlorobenzene reminiscent of glasses of other biphenyl derivatives, which is interesting for the preparation of amorphous materials for optics applications.

Identification of bovine embryos cultured in groups by attachment of barcodes to the zona pellucida

The low number of oocytes collected from unstimulated donors by ovum pick-up means that embryos produced from each individual female have to be cultured individually or in very small groups. However, it has been demonstrated that single-embryo culture is less efficient than embryo culture in groups. To overcome this limitation, we developed a direct embryo-tagging system, which allows the collective culture of embryos from different origins whilst preserving their pedigree. Presumptive bovine zygotes were tagged with eight wheat-germ agglutinin biofunctionalised polysilicon barcodes attached to the outer surface of the zona pellucida (ZP). Four different barcodes were used to encode groups of 20-25 embryos, which were then cultured in the same drop. Cleavage, Day-7 and Day-8 blastocysts and barcode retention rates were assessed. In addition, Day-7 blastocysts were vitrified and warmed. Barcode attachment to the ZP of bovine embryos affected neither in vitro embryo development nor post-warming survival of the tagged embryos. All the embryos maintained barcodes attached until Day 8 of culture (3.63±0.37 barcodes per embryo) and could be identified. In conclusion, identification of embryos by barcodes attached to the ZP is feasible and will allow the culture of embryos from different donors in the same drop.