Rodrigo Gómez-Martínez

Silicon chips detect intracellular pressure changes in living cells

The ability to measure pressure changes inside different components of a living cell is important, because it offers an alternative way to study fundamental processes that involve cell deformation. Most current techniques such as pipette aspiration, optical interferometry or external pressure probes use either indirect measurement methods or approaches that can damage the cell membrane. Here we show that a silicon chip small enough to be internalized into a living cell can be used to detect pressure changes inside the cell. The chip, which consists of two membranes separated by a vacuum gap to form a Fabry-Pérot resonator, detects pressure changes that can be quantified from the intensity of the reflected light. Using this chip, we show that extracellular hydrostatic pressure is transmitted into HeLa cells and that these cells can endure hypo-osmotic stress without significantly increasing their intracellular hydrostatic pressure.

Intracellular Silicon Chips in Living Cells

Spanish government; Grant Number: MINAHE 2 project MEC-TEC2005-07996-CO2-01, MINAHE 3 project MEC-TEC2008-06883-CO3-01, SAF2007-66175, INTRACELL project CSIC-200550F0241 8

A novel embryo identification system by direct tagging of mouse embryos using silicon-based barcodes

BACKGROUND Measures to prevent assisted reproductive technologies (ART) mix-ups, such as labeling of all labware and double-witnessing protocols, are currently in place in fertility clinics worldwide. Technological solutions for electronic witnessing are also being developed. However, none of these solutions eliminate the risk of identification errors, because gametes and embryos must be transferred between containers several times during an ART cycle. Thus, the objective of this study was to provide a proof of concept for a direct embryo labeling system using silicon-based barcodes. METHODS Three different types of silicon-based barcodes (A, B and C) were designed and manufactured, and microinjected into the perivitelline space of mouse pronuclear embryos (one to four barcodes per embryo). Embryos were cultured in vitro until the blastocyst stage, and rates of embryo development, retention of the barcodes in the perivitelline space and embryo identification were assessed every 24 h. Release of the barcodes after embryo hatching was also determined. Finally, embryos microinjected with barcodes were frozen and thawed at the 2-cell stage to test the validity of the system after cryopreservation. RESULTS Barcodes present in the perivitelline space, independently of their type and number, did not affect embryo development rates. The majority of embryos (>90%) retained at least one of the microinjected barcodes in their perivitelline space up to the blastocyst stage. Increasing the number of barcodes per embryo resulted in a significant increase in embryo identification rates, but a significant decrease in the barcode release rates after embryo hatching. The highest rates of successful embryo identification (97%) were achieved with the microinjection of four type C barcodes, and were not affected by cryopreservation. CONCLUSIONS Our results demonstrate the feasibility of a direct embryo labeling system and constitute the starting point in the development of such systems.

Barcode tagging of human oocytes and embryos to prevent mix-ups in assisted reproduction technologies

STUDY QUESTION Is the attachment of biofunctionalized polysilicon barcodes to the outer surface of the zona pellucida an effective approach for the direct tagging and identification of human oocytes and embryos during assisted reproduction technologies (ARTs)? SUMMARY ANSWER The direct tagging system based on lectin-biofunctionalized polysilicon barcodes of micrometric dimensions is simple, safe and highly efficient, allowing the identification of human oocytes and embryos during the various procedures typically conducted during an assisted reproduction cycle. WHAT IS KNOWN ALREADY Measures to prevent mismatching errors (mix-ups) of the reproductive samples are currently in place in fertility clinics, but none of them are totally effective and several mix-up cases have been reported worldwide. Using a mouse model, our group has previously developed an effective direct embryo tagging system which does not interfere with the in vitro and in vivo development of the tagged embryos. This system has now been tested in human oocytes and embryos. STUDY DESIGN, SIZE, DURATION Fresh immature and mature fertilization-failed oocytes (n = 21) and cryopreserved day 1 embryos produced by in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI) (n = 205) were donated by patients (n = 76) undergoing ARTs. In vitro development rates, embryo quality and post-vitrification survival were compared between tagged (n = 106) and non-tagged (control) embryos (n = 99). Barcode retention and identification rates were also calculated, both for embryos and for oocytes subjected to a simulated ICSI and parthenogenetic activation. Experiments were conducted from January 2012 to January 2013. PARTICIPANTS/MATERIALS, SETTING, METHODS Barcodes were fabricated in polysilicon and biofunctionalizated with wheat germ agglutinin lectin. Embryos were tagged with 10 barcodes and cultured in vitro until the blastocyst stage, when they were either differentially stained with propidium iodide and Hoechst or vitrified using the Cryotop method. Embryo quality was also analyzed by embryo grading and time-lapse monitoring. Injected oocytes were parthenogenetically activated using ionomycin and 6-dimethylaminopurine. MAIN RESULTS AND THE ROLE OF CHANCE Blastocyst development rates of tagged (27/58) and non-tagged embryos (24/51) were equivalent, and no significant differences in the timing of key morphokinetic parameters and the number of inner cell mass cells were detected between the two groups (tagged: 24.7 ± 2.5; non-tagged: 22.3 ± 1.9), indicating that preimplantation embryo potential and quality are not affected by the barcodes. Similarly, re-expansion rates of vitrified-warmed tagged (19/21) and non-tagged (16/19) blastocysts were similar. Global identification rates of 96.9 and 89.5% were obtained in fresh (mean barcode retention: 9.22 ± 0.13) and vitrified-warmed (mean barcode retention: 7.79 ± 0.35) tagged embryos, respectively, when simulating an automatic barcode reading process, though these rates were increased to 100% just by rotating the embryos during barcode reading. Only one of the oocytes lost one barcode during intracytoplasmic injection (100% identification rate) and all oocytes retained all the barcodes after parthenogenetic activation. LIMITATIONS, REASONS FOR CAUTION Although the direct embryo tagging system developed is effective, it only allows the identification and traceability of oocytes destined for ICSI and embryos. Thus, the traceability of all reproductive samples (oocytes destined for IVF and sperm) is not yet ensured. WIDER IMPLICATIONS OF THE FINDINGS The direct embryo tagging system developed here provides fertility clinics with a novel tool to reduce the risk of mix-ups in human ARTs. The system can also be useful in research studies that require the individual identification of oocytes or embryos and their individual tracking. STUDY FUNDING/COMPETING INTEREST(S) This study was supported by the Sociedad Española de Fertilidad, the Spanish Ministry of Education and Science (TEC2011-29140-C03) and the Generalitat de Catalunya (2009SGR-00282 and 2009SGR-00158). The authors do not have any competing interests.

Traceability of human sperm samples by direct tagging with polysilicon microbarcodes

The increasing number of patients undergoing assisted reproductive technology (ART) treatments and of cycles performed in fertility centres has led to some traceability errors. Although the incidence of mismatching errors is extremely low, any error is unacceptable, therefore different strategies have been developed to further minimize these errors, such as manual double-witnessing or electronic witnessing systems. More recently, our group developed a direct tagging method consisting of attaching microbarcodes directly to the zona pellucida of human oocytes/embryos. Here, this method is taken a step further by using these microbarcodes to tag human semen samples, demonstrating that the barcodes are not toxic and do not interfere in the selection of motile spermatozoa nor in the cryopreservation of the sperm samples. In addition, when this tagging system was applied to an animal model (rabbit), pregnancy rate and kitten viability were not affected.

Micro-barcodes for biological applications

Single cell labeling and tracking is an interesting field in cell biology. The growing development of small barcodes will allow studies at single cell behavior under optical microscopes. These codes have to fulfill special biological, optical and fabrication requirements. Nowadays, silicon microtechnologies advances allow fabricated structures at small dimension. In this paper, we show the design and fabrication of silicon and polysilicon barcodes based on standard MEMS technologies and their feasibility to be used for cell tracking and labeling.