Osama M. K. Kassem

Determining heterogeneous deformation for granitic rocks in the northern thrust in Wadi Mubarak belt, Eastern Desert, Egypt

Finite-strain was studied in the mylonitic granitic and metasedimentary rocks in the northern thrust in Wadi Mubarak belt to show a relationship to nappe contacts between the old granitic and metavolcano-sedimentary rocks and to shed light on the heterogeneous deformation for the northern thrust in Wadi Mubarak belt. We used the Rf/ϕ and Fry methods on feldspar porphyroclasts, quartz and mafic grains from 7 old granitic and 7 metasedimentary samples in the northern thrust in Wadi Mubarak belt. The finite-strain data shows that old granitic rocks were moderate to highly deformed and axial ratios in the XZ section range from 3.05 to 7.10 for granitic and metasedimentary rocks. The long axes (X) of the finite-strain ellipsoids trend W/WNW and E/ENE in the northern thrust in Wadi Mubarak belt. Furthermore, the short axes (Z) are subvertical associated with a subhorizontal foliation. The value of strain magnitudes mainly constants towards the tectonic contacts between the mylonitic granite and metavolcano-sedimentary rocks. The data indicate oblate strain symmetry (flattening strain) in the mylonitic granite rocks. It is suggested that the accumulation of finite strain was formed before or/and during nappe contacts. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes and foliation was formed during nappe thrusting.

Strain analysis and microstructural evolution characteristic of neoproterozoic rocks associations of Wadi El Falek, centre Eastern Desert, Egypt

The estimation of finite strain in rocks is fundamental to a meaningful understanding of deformational processes and products on all scales from microscopic fabric development to regional structural analyses. The Rf/φ and Fry methods on feldspar porphyroclasts and mafic grains from 5 granite, 1 metavolcanic, 3 metasedimentary and 1 granodiorite samples were used in Wadi El Falek region. Finite-strain data shows that a high to moderate range of deformation of the granitic to metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.60 to 4.10 for the Rf/φ method and from 2.80 to 4.90 for the Fry method. Furthermore, the short axes are subvertical associated with a subhorizontal foliation. We conclude that finite strain in the deformed granite rocks is of the same order of magnitude as that from metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Wadi El Falek area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the nappe contacts formed during the accumulation of finite strain.

Kinematic vorticity technique for porphyroclasts in the metamorphic rocks: an example from the northern thrust in Wadi Mubarak belt, Eastern Desert, Egypt

New structural, metamorphic, finite strain, and kinematic vorticity data for mylonitic granitic rocks from northern thrust in Wadi Mubarak reveal a history of deformation reflecting different tectonic regimes. The vorticity analysis of porphyroclasts was determined in high temperature mylonites. The kinematic vorticity number for the mylonitic granitic samples in the northern thrust in Wadi Mubarak range from 0.66 to 0.90, and together with the strain data suggest deviations from simple shear. It is concluded that nappe stacking occurred early during the underthrusting event probably by brittle imbrication and that ductile strain was superimposed on the nappe structure during thrusting. The accumulation of ductile strain during thrusting was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the northern thrust in Wadi Mubarak and adjacent units.الملخصالتركيب البنائية الجديدة و التحول و الاجهاد النهائى و التحاليل الدورانية لصخور الجرانيت المليوتنية من الصدع الدسرى الشمالى لمنطقة وادى مبارك يوضح تاريخ التشوة و يعكس الحركات التكتونية المختلفة للمنطقة. التحاليل الدورانية لصخور البورفيكلاسيتية تتحدد بواسطة درجة الحرارة العالية مما يؤدى تكون الصخور المليوتنية. التحاليل الدورانية لعينات الصخور الجرانيت المليوتنية من الصدع الدسرى الشمالى لمنطقة وادى مبارك تتراوح بين 0.66 إلى 0.90 مع بيانات الاجهاد النهائى يقترح ان الانحرافات من القص البسيط. يستنتج من ذلك ان عملية التصادم حدثت مبكرا اثناء تدافع تراكيب فوق الاخرى و المحتمل بالتصفيف الهش و تراكم الاجهاد المرن ركبا على تراكيب الجيولوجية اثناء الصدوع الدسرية. ونلاحظ ان تراكم الاجهاد المرن اثناء الصدوع الدسرية لم تكن بالقص البسيط و لكن عن طريق الضغط العمودى الذى يسبب التصفيف الشبة الافقى لصخور الجرانيت المليوتنية من الصدع الدسرى الشمالى لمنطقة وادى مبارك و المناطق المحيطة بها.

Application of kinematic vorticity techniques for mylonitized Rocks in Al Amar suture, eastern Arabian Shield, Saudi Arabia

The rotation of rigid objects within a flowing viscous medium is a function of several factors including the degree of non-coaxiality. The relationship between the orientation of such objects and their aspect ratio can be used in vorticity analyses in a variety of geological settings. Method for estimation of vorticity analysis to quantitative of kinematic vorticity number (Wm) has been applied using rotated rigid objects, such as quartz and feldspar objects. The kinematic vorticity number determined for high temperature mylonitic Abt schist in Al Amar area, extreme eastern Arabian Shield, ranges from ∼0.8 to 0.9. Obtained results from vorticity and strain analyses indicate that deformation in the area deviated from simple shear. It is concluded that nappe stacking occurred early during an earlier thrusting event, probably by brittle imbrications. Ductile strain was superimposed on the nappe structure at high-pressure as revealed by a penetrative subhorizontal foliation that is developed subparallel to tectonic contacts versus the underlying and overlying nappes. Accumulation of ductile strain during underplating was not by simple shear but involved a component of vertical shortening, which caused the subhorizontal foliation in the Al Amar area. In most cases, this foliation was formed concurrently with thrust sheets imbrications, indicating that nappe stacking was associated with vertical shortening.

Microstructural and strain analysis in the Tanumah area, Arabian Shield, Saudi Arabia

The magnitude and orientation of the finite strain ellipsoid are critical for constraining displacement across ductile deformation. Finite strain was studied in granitic gneiss and metavolcano-sedimentary rocks of the Tanumah area. Finite strain shows its relationship to the nappe contacts between the granitic gneiss and metavolcano-sedimentary rocks and explains the nature of the subhorizontal foliation typical for the Tanumah area. It used the Rf/φ and Fry methods on quartz, feldspar porphyroclasts and mafic grains (such as hornblende and biotite) from two granite, four tonalite and granodiorite, one gneissic quartz diorite, three biotite quartz diorite, six metasedimentary, one meta-andesite and two metavolcanic rocks. The obtained finite strain data show that the granitic gneisses and metavolcano-sedimentary rocks studied were moderately to highly deformed; the X/Z axial ratios range from 1.70 to 4.80 for Rf/φ method and from 1.20 to 4.50 for Fry method. The direction of finite strain for the long axes shows N to WNW trend and plunges shallowly to the WNW in most studied samples. The Z-axes are subvertical. The data indicate oblate strain symmetry (flattening) in the Tanumah area, and the strain magnitudes do not increase towards the tectonic contacts. It is assumed that the granitic gneisses and metavolcano-sedimentary rocks studied have similar deformation behaviour. It is suggested that the accumulation of finite strain was not associated with any significant volume change. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes, and foliation was formed during thrusting and intrusion of granite rocks. It is concluded that the nappe contacts formed during progressive thrusting under semi-brittle to ductile deformation by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the Tanumah area.

Finite strain analysis of metavolcanics and metapyroclastics in gold-bearing shear zone of the Dungash area, Central Eastern Desert, Egypt

The Dungash gold mine area is situated in an EW-trending quartz vein along a shear zone in metavolcanic and metasedimentary host rocks in the Eastern Desert of Egypt. These rocks are associated with the major geologic structures, which are attributed to various deformational stages of the Neoproterozoic basement rocks. Field geology, finite strain and microstructural analyses were carried out and the relation-ships between the lithological contacts and major/minor structures have been studied. The Rf/ϕ and Fry methods were applied on the metavolcano-sedimentary and metapyroclastic samples from 5 quartz veins samples, 7 metavolcanics samples, 3 metasedimentary samples and 4 metapyroclastic samples in Dungash area. Finite-strain data show that a low to moderate range of deformation of the metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.70 to 4.80 for the Rf/ϕ method and from 1.65 to 4.50 for the Fry method. We conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. Furthermore, the contact between principal rock units is sheared in the Dungash area under brittle to semi-ductile deformation conditions. In this case, the accumulated finite strain is associated with the deformation during thrusting to assemble nappe structure. It indicates that the sheared contacts have been formed during the accumulation of finite strain.

Vorticity Analysis and Deformation History of the Mizil Gneiss Dome, Eastern Arabian Shield, Saudi Arabia

The Mizil gneiss dome is an elliptical structure consisting of an amphibolite-facies volcanosedimentary mantle and a gneissic granite core. This dome is located at the northern tip of the Ar Rayn terrane only a few kilometers from the eastern edge of the Arabian shield. Previous investigations have shown the intrusive core to be an adakitic diapir with a U–Pb zircon age of 689 ± 10 Ma; this age is 50–80 Ma years older than other granites in this terrane. Vorticity analysis was carried out on samples from the intrusive core and volcanosedimentary cover; the Passchier and Rigid Grain Net (RGN) methods were used to obtain the kinematic vorticity number (Wk) and the mean kinematic vorticity number (Wm). The Wk and Wm values show a marked increase towards the south; such a pattern indicates a N-S movement of the core pluton thus creating an inclined diapir tilted to the south. Analogue experiments simulating the flow of magma diapirs rising form a subducted slab through the mantle wedge have shown that supra-subduction zone oblique diapirs are produced close to the trench and are elongated normal to the convergence direction as is the case in the Mizil pluton. This effect was found to increase with increasing slab dip due to enhanced drag along the upper surface of the subducted lithospheric plate. Spontaneous subduction which is often associated with rollback resulting in back-arc extension and steep dipping slabs is thought to have occurred in the Mozambique Ocean by 700 Ma. The Mizil pluton is coeval with the back-arc Urd ophiolite from the adjacent Dawadimi terrane, and could therefore have been produced by incipient subduction of a relatively cold slab as observed in many Pacific margin adakites. The tectonic evolution of the eastern shield, as deduced from the Mizil dome and other data from Ar Rayn and neighboring terranes, begins with the subduction of >100 My-old lithosphere beneath the Afif terrane resulting in back-arc spreading and the splitting of the Ar Rayn arc from the Afif microplate, with the concomitant production of a small volume of adakite melt. Other arc terrane(s) docked east of Ar Rayn with the westward-directed subduction still going but a lower angles and greater depth due to trench jump; this phase produced the more prevalent non-adakitic group-1 granites. A major collisional orogeny affected the entire eastern shield between 620–600 Ma and sutured the eastern shield terranes with northern Gondwana.

Finite Strain Analysis of the Wadi Fatima Shear Zone in Western Arabia, Saudi Arabia

Neoproterozoic rocks, Oligocene to Neogene sediments and Tertiary Red Sea rift-related volcanics (Harrat) are three dominant major groups exposed in the Jeddah tectonic terrane in Western Arabia. The basement complex comprises amphibolites, schists, and older and younger granites unconformably overlain by a post-amalgamation volcanosedimentary sequence (Fatima Group) exhibiting post-accretionary thrusting and thrust-related structures. The older granites and/or the amphibolites and schists display mylonitization and shearing in some outcrops, and the observed kinematic indicators indicate dextral monoclinic symmetry along the impressive Wadi Fatima Shear Zone. Finite strain analysis of the mylonitized lithologies is used to interpret the deformation history of the Wadi Fatima Shear Zone. The measured finite strain data demonstrate that the amphibolites, schists, and older granites are mildly to moderately deformed, where XZ (axial ratios in XZ direction) vary from 2.76 to 4.22 and from 2.04 to 3.90 for the Rf/φ and Fry method respectively. The shortening axes (Z) have subvertical attitude and are associated with subhorizontal foliation. The data show oblate strain ellipsoids in the different rocks in the studied area and indication bulk flattening strain. We assume that the different rock types have similar deformation behavior. In the deformed granite, the strain data are identical in magnitude with those obtained in the Fatima Group volcanosedimentary sequence. Finite strain accumulated without any significant volume change contemporaneously with syn-accretionary transpressive structures. It is concluded that a simple-shear deformation with constant-volume plane strain exists, where displacement is strictly parallel to the shear plane. Furthermore, the contacts between various lithological units in the Wadi Fatima Shear Zone were formed under brittle to semi-ductile deformation conditions.

The Effect of finite strain and deformation history of HALABAN area, eastern Arabian shield, Saudi Arabia

The present study aims to evaluate a relationship between the mineralogy and structural analysis in the Halaban area and to document the tectonic evolution of Halaban and Al Amar faults. The collected samples were taken from deformed granitiods rocks (such as granite, gneisses and tonalite), metasedimentary, metavolcanic, metagabbro and carbonate rocks are trend to NE-SW with low dip angle in the Halaban area. These samples were 8 from granite, 14 metagabbro, 6 metavolcanics, 5 tonalite, 6 metasedimentary, 10 gneisses and 8 carbonate rocks. Our results are described for the different axial ratios of deformed rocks as the following: XZ sections range from 1.10 to 4.60 in the Fry method and range from 1.70 to 2.71 in the Rf/ϕ method. YZ sections range from 1.10 to 3.34 in the Fry method and range from 1.62 to 2.63 in the Rf/Phi method. In addition, XY sections range from 1 to 3.51 in the Fry method and range from 1 to 1.27 in the Rf/ϕ method for deformed granite rocks, metasedimentry rocks, and metagabbro. The stretch axes for measured samples in the X direction axes (SX) variety from 1.06 to 2.53 in the Fry method and vary from 1.20 to 1.45 in the Rf/ϕ method. The values of the Y direction axes (SY) vary from 0.72 to 1.43 in the Fry method, which indicates contraction and extension in this direction and vary from 1.13 to 1.37 in the Rf/ϕ method which indicates extension in this direction. Furthermore, the Z direction axes (SZ) varies from 0.09 to 0.89 in the Fry method and from 0.52 to 0.71 in the Rf/ϕ method. The stretches axes in the Z direction (SZ) show a vertical shortening about 11% to 91% in the Fry method and show vertical shortening about 29% to 48% in the Rf/ϕ method. The studied rock units are generally affected by brittle-ductile shear zones, which are sub-parallel to parallel NW or NNW trend. It assumed that different rock types of have similar deformation behavior. Based on these results, it is concluded that the finite strain is accumulated during the metamorphism after that was started the deformation by thrusting activity. The contacts between the different rock types were deformed during thrusting under semi-brittle to ductile deformation conditions by simple shear. A component of vertical shortening is also involved causing subhorizontal foliation in the Halaban area.

Integrated Remote Sensing and Structural Analysis Studies of Tayyib Al-Ism Area, Northwestern Arabian Shield, Saudi Arabia

Geological and structural mappings of Tayyib Al-Ism area were carried out using the rocks finite strain data, the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) data and the field based observations. To analyze the finite strain in the studied rocks, the Rf /ϕ and Fry methods are applied to feldspar porphyroclasts and mafic grains from nine metavolcano-sedimentary samples (Hegaf Formation), four diorite-gabbros suite samples (Sawawin Complex), two meta-granite samples (Ifal suite) and five Zuhd alkali granite samples. The obtained data indicate traces of high to moderate level of deformation in the meta-granite and metavolcano-sedimentary rocks. The axial ratios along the XZ section range from 1.70 to 4.80 for the Rf/ϕ method and from 1.50 to 4.50 for the Fry method. A sub-vertical trend of short axes in association with sub-horizontal foliation is also observed. These informations allow us to conclude that a finite strain in the deformed granitic rocks is of the same order of magnitude as in the metavolcano-sedimentary rocks. The contacts between the metavolcano-sedimentary and granitic rocks in Tayyib al Ism area were formed during the granitic intrusions along some of the faults under brittle to semi-ductile deformation conditions. These faults have significantly influenced the geometry and style of rifting in the Red Sea during the Neogene. The finite strain was accumulated in the area during the process of deformation, which superimpose the already existed nappe structure. It indicates that the nappe contacts formed during the accumulation of finite strain. In addition to finite strain analysis, band ratio images (3/1, 5/3, 7/5) and Principal Component Analysis (PCA) technique have been used, which proved effective in mapping geological and structural features of various rock bodies exposed in the study area.