Oscar Gallardo

Characterization of a Family GH5 Xylanase with Activity on Neutral Oligosaccharides and Evaluation as a Pulp Bleaching Aid

ABSTRACT A new bacterial xylanase belonging to family 5 of glycosyl hydrolases was identified and characterized. The xylanase, Xyn5B from Bacillus sp. strain BP-7, was active on neutral, nonsubstituted xylooligosaccharides, showing a clear difference from other GH5 xylanases characterized to date that show a requirement for methyl-glucuronic acid side chains for catalysis. The enzyme was evaluated on Eucalyptus kraft pulp, showing its effectiveness as a bleaching aid.

Structural insights into the specificity of Xyn10B from Paenibacillus barcinonensis and its improved stability by forced protein evolution.

Paenibacillus barcinonensis is a soil bacterium bearing a complex set of enzymes for xylan degradation, including several secreted enzymes and Xyn10B, one of the few intracellular xylanases reported to date. The crystal structure of Xyn10B has been determined by x-ray analysis. The enzyme folds into the typical (β/α)8 barrel of family 10 glycosyl hydrolases (GH10), with additional secondary structure elements within the β/α motifs. One of these loops -L7- located at the β7 C terminus, was essential for xylanase activity as its partial deletion yielded an inactive enzyme. The loop contains residues His249–Glu250, which shape a pocket opened to solvent in close proximity to the +2 subsite, which has not been described in other GH10 enzymes. This wide cavity at the +2 subsite, where methyl-2,4-pentanediol from the crystallization medium was found, is a noteworthy feature of Xyn10B, as compared with the narrow crevice described for other GH10 xylanases. Docking analysis showed that this open cavity can accommodate glucuronic acid decorations of xylo-oligosaccharides. Co-crystallization experiments with conduramine derivative inhibitors supported the importance of this open cavity at the +2 subsite for Xyn10B activity. Several mutant derivatives of Xyn10B with improved thermal stability were obtained by forced evolution. Among them, mutant xylanases S15L and M93V showed increased half-life, whereas the double mutant S15L/M93V exhibited a further increase in stability, showing a 20-fold higher heat resistance than the wild type xylanase. All the mutations obtained were located on the surface of Xyn10B. Replacement of a Ser by a Leu residue in mutant xylanase S15L can increase hydrophobic packing efficiency and fill a superficial indentation of the protein, giving rise to a more compact structure of the enzyme.

Cloning and Characterization of Xylanase A from the Strain Bacillus sp. BP-7: Comparison with Alkaline pI-Low Molecular Weight Xylanases of Family 11

The xynA gene encoding a xylanase from the recently isolated Bacillus sp. strain BP-7 has been cloned and expressed in Escherichia coli. Recombinant xylanase A showed high activity on xylans from hardwoods and cereals, and exhibited maximum activity at pH 6 and 60°C. The enzyme remained stable after incubation at 50°C and pH 7 for 3 h, and it was strongly inhibited by Mn2+, Fe3+, Pb2+, and Hg2+. Analysis of xylanase A in zymograms showed an apparent molecular size of 24 kDa and a pI of above 9. The amino acid sequence of xylanase A, as deduced from xynA gene, shows homology to alkaline pI-low molecular weight xylanases of family 11 such as XynA from Bacillus subtilis. Analysis of codon usage in xynA from Bacillus sp. BP-7 shows that the G+C content at the first and second codon positions is notably different from the mean values found for glycosyl hydrolase genes from Bacillus subtilis.

New xylanases to obtain modified eucalypt fibres with high-cellulose content

Modified fibres with high-cellulose content were obtained with two new bacterial xylanases from families 11 and 5. These xylanases were applied separately or simultaneously in a complete ECF (Elemental Chlorine Free) bleaching sequence. Both xylanases improved delignification and bleaching during the sequence and a synergistic effect of the enzymes was observed on several pulp and paper properties. The xylanases boosted the release of xylooligosaccharides branched with hexenuronic acids (HexA), giving rise to fibres with a reduced HexA and xylose content. However, these effects depended on the xylanase used, being the family 11 enzyme more efficient than the family 5 xylanase. Effluent properties such as absorbance spectra UV/Vis, COD and colour were affected by the enzymatic sequences as a consequence of the dissolution of lignin and xylooligosaccharides. Some changes in the fibre morphology were also produced without affecting the final paper strength properties.

Surfing transcriptomic landscapes. A step beyond the annotation of chromosome 16 proteome

The Spanish team of the Human Proteome Project (SpHPP) marked the annotation of Chr16 and data analysis as one of its priorities. Precise annotation of Chromosome 16 proteins according to C-HPP criteria is presented. Moreover, Human Body Map 2.0 RNA-Seq and Encyclopedia of DNA Elements (ENCODE) data sets were used to obtain further information relative to cell/tissue specific chromosome 16 coding gene expression patterns and to infer the presence of missing proteins. Twenty-four shotgun 2D-LC-MS/MS and gel/LC-MS/MS MIAPE compliant experiments, representing 41% coverage of chromosome 16 proteins, were performed. Furthermore, mapping of large-scale multicenter mass spectrometry data sets from CCD18, MCF7, Jurkat, and Ramos cell lines into RNA-Seq data allowed further insights relative to correlation of chromosome 16 transcripts and proteins. Detection and quantification of chromosome 16 proteins in biological matrices by SRM procedures are also primary goals of the SpHPP. Two strategies were undertaken: one focused on known proteins, taking advantage of MS data already available, and the second, aimed at the detection of the missing proteins, is based on the expression of recombinant proteins to gather MS information and optimize SRM methods that will be used in real biological samples. SRM methods for 49 known proteins and for recombinant forms of 24 missing proteins are reported in this study.

The phosphoproteome of human Jurkat T cell clones upon costimulation with anti-CD3/anti-CD28 antibodies

Phosphorylation is a reversible post-translational modification, playing a vital role in protein function. In T cells, protein phosphorylation is the key mechanism regulating T cell receptor-driven signaling pathways. In order to gain insights into the phosphoproteome evolution of T cell activation, we performed a large-scale quantitative phosphoproteomics study of Jurkat E6.1 (wild type) and Jurkat gamma1 (Phospholipase gamma1 null) cell clones upon costimulation with anti-CD3 and anti-CD28 antibodies at times ranging from 15min to as long as 120min. In total, we identified 5585 phosphopeptides belonging to 2008 phosphoproteins from both cell clones. We detected 130 and 114 novel phosphopeptides in Jurkat E6.1 and Jurkat gamma1 clones, respectively. A significantly lower number of proteins containing regulated phosphorylation sites were identified in Jurkat gamma1 in comparison to Jurkat E6.1, reflecting the vital role of Phospholipase gamma1 in T cell signaling. Several new phosphorylation sites from lymphocyte-specific protein tyrosine kinase (Lck) were identified. Of these, serine-121 showed significant changes in JE6.1 while only small changes in the Jgamma1 clone. Our data may contribute to the current human T cell phosphoproteome and provide a better understanding on T cell receptor signaling. Data are available via ProteomeXchange with identifier PXD002871.

Multicenter experiment for quality control of peptide-centric LC–MS/MS analysis — A longitudinal performance assessment with nLC coupled to orbitrap MS analyzers ☆

Proteomic technologies based on mass spectrometry (MS) have greatly evolved in the past years, and nowadays it is possible to routinely identify thousands of peptides from complex biological samples in a single LC-MS/MS experiment. Despite the advancements in proteomic technologies, the scientific community still faces important challenges in terms of depth and reproducibility of proteomics analyses. Here, we present a multicenter study designed to evaluate long-term performance of LC-MS/MS platforms within the Spanish Proteomics Facilities Network (ProteoRed-ISCIII). The study was performed under well-established standard operating procedures, and demonstrated that it is possible to attain qualitative and quantitative reproducibility over time. Our study highlights the importance of deploying quality assessment metrics routinely in individual laboratories and in multi-laboratory studies. The mass spectrometry data have been deposited to the ProteomeXchange Consortium with the data set identifier PXD000205.This article is part of a Special Issue entitled: HUPO 2014.

A collection of open source applications for mass spectrometry data mining.

We present several bioinformatics applications for the identification and quantification of phosphoproteome components by MS. These applications include a front‐end graphical user interface that combines several Thermo RAW formats to MASCOT™ Generic Format extractors (EasierMgf), two graphical user interfaces for search engines OMSSA and SEQUEST (OmssaGui and SequestGui), and three applications, one for the management of databases in FASTA format (FastaTools), another for the integration of search results from up to three search engines (Integrator), and another one for the visualization of mass spectra and their corresponding database search results (JsonVisor). These applications were developed to solve some of the common problems found in proteomic and phosphoproteomic data analysis and were integrated in the workflow for data processing and feeding on our LymPHOS database. Applications were designed modularly and can be used standalone. These tools are written in Perl and Python programming languages and are supported on Windows platforms. They are all released under an Open Source Software license and can be freely downloaded from our software repository hosted at GoogleCode.

Performance of new and commercial xylanases for ECF and TCF bleaching of eucalyptus kraft pulp

Since xylanases can differ widely in their bleaching efficiency, the performance of one new and two commercial xylanases was evaluated in an eucalyptus kraft pulp following XD (X: xylanase; D: chlorine dioxide) and XP (P: hydrogen peroxide) sequences. The new xylanase did not show a significant bleach boosting effect but increased the hexenuronic acid (HexA) removal by 10% after the D stage. The two commercial xylanases behaved in a different way, being one of them (XC) the most effective in increasing delignification (9%) and brightness (3%ISO). Its effectiveness was related to its greater action on releasing the xylan polymer, thus producing also a strong decrease in the HexA contents during the enzymatic stage (15%). All xylanases produced morphological changes in the fibre surfaces, but only with XC cracks and holes that improved the diffusion of reactives were observed. Finally, the best bleaching results were obtained with the XD sequence and therefore, a complete bleaching sequence XDEopD1 (Eop: alkaline extraction with oxygen and peroxide) was carried out with the best enzyme.

Cloning and production of Xylanase B from Paenibacillus barcinonensis in Bacillus subtilis hosts

Xylanase B from Paenibacillus barcinonensis was cloned in shuttle vectors for Escherichia coli and Bacillus subtilis, and expressed in Bacillus hosts. Several recombinant strains were constructed, among which B. subtilis MW15/pRBSPOX20 showed the highest production. This recombinant strain consists of a protease double mutant host containing P. barcinonensis xynB gene under the control of a phage SPO2 strong promoter. Maximum production was found when the strain was cultured in nutrient broth supplemented with xylans. Analysis of xylanase B location in B. subtilis MW15/pRBSPOX20 showed that the enzyme remained cell-associated in young cultures, consistent with its intracellular location in its original host, P. barcinonensis, and the lack of a signal peptide. However, when cultures reached the stationary phase, xylanase B was released to the external medium as a result of cell lysis. The amount of enzyme located in the supernatants of old cultures could account for 50% of total xylanase activity. Analysis by SDS–PAGE showed that xylanase B is an abundant protein found in the culture medium in late stationary phase cultures.