Ozkan Adiguzel

Effectiveness of ethylenediaminetetraacetic acid (EDTA) and MTAD on debris and smear layer removal using a self-adjusting file

OBJECTIVE The aim of this study was to investigate the cleaning ability of a self-adjusting file (SAF) system regarding debris and smear layer removal using ethylenediaminetetraacetic acid (EDTA) or MTAD. STUDY DESIGN In total, 45 maxillary incisor teeth were randomly divided into 2 different irrigation groups of 20 canals each and a negative control group of 5 canals. The canals in each of the irrigation groups were irrigated using sodium hypochlorite (1.3%) as an initial irrigant during the first 2 minutes of operation, followed by 2 minutes continuous irrigation with either 17% EDTA or MTAD in a closed system. The negative control group was irrigated using 1.3% sodium hypochlorite. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of debris and smear layer in the coronal, middle, and apical thirds of the canal was evaluated using a 5-grade scoring system with ×200 and ×2,000 magnification, respectively. RESULTS The SAF operation with 2-minute continuous irrigation using MTAD resulted in root canal walls that were free of smear layer in 85%, 70%, and 60% and of debris in 95%, 90%, and 95% of the coronal, middle, and apical thirds of the root canals, respectively. The SAF operation with continuous irrigation using EDTA resulted in root canal walls that were free of smear layer in 85%, 60%, and 50% and of debris in 95%, 90%, and 85% of the coronal, middle, and apical thirds of the root canals, respectively. Teeth in the negative control group were totally covered with debris. Evaluation by SEM showed no significant difference between the tested irrigants in removing the smear layer and debris among the different regions of the root canal. Both groups were significantly different from the negative control group. CONCLUSIONS When using the SAF, the protocols used in this study were effective for debridement for all regions of the root canal even for the apical thirds.

Evaluation of radicular dentin erosion and smear layer removal capacity of Self-Adjusting File using different concentrations of sodium hypochlorite as an initial irrigant

OBJECTIVE The aim of this study was to evaluate Self-Adjusting File (SAF) in the removal of smear layer and impact on the dentin surface using sodium hypochlorite (NaOCl) as an initial irrigation solution at 3 different concentrations combined with 1% EDTA. In addition, the erosive effect of this dual irrigation regime was examined. STUDY DESIGN Root canal preparations were performed in 30 teeth using the SAF with a continuous irrigation device (Vatea) in a closed system in which the apical foramen was sealed. The vibration mode was on for 5 minutes during the preparation. Three different concentrations of NaOCl (1.3%, 2.6%, and 5.25%) and 1% EDTA were used for continuous irrigation. The final flush was also performed using NaOCl with the vibration mode on. The roots were split longitudinally and subjected to scanning electron microscopy (SEM). The presence of the smear layer was scored using a 5-point scoring system, and the erosive capacity of the irrigants were scored using a 3-point scoring system. RESULTS The results showed no significant difference in smear layer removal among different concentrations of NaOCl and among the regions. Clean dentin surfaces were observed in 80%, 70%, and 70% with a score of 1 or 2 of the apical thirds using 1.3%, 2.6%, and 5.25% NaOCl, respectively. The 1.3% and 2.6% NaOCl solutions showed similar erosion patterns on the root canal walls (P > .05); however, 5.25% NaOCl caused severe erosion (P < .05). CONCLUSIONS When using the SAF with continuous irrigation and vibration, lower concentrations of NaOCl and EDTA can be recommended for efficient clinical removal of the smear layer even in the apical thirds and to avoid excessive erosion of root dentin.

Evaluation of ectodermal dysplasia.

This case series report outlines possible cranio‐maxillofacial deformation consequences associated with ectodermal dysplasia (ED) and embryonic malformations, including dental agenesis. Also described are the oral aspects and rehabilitation. A total of 14 ED patients (7 males and 7 females, aged 5‐45 years) underwent clinical examination before assessment and treatment. Lateral cephalometric radiography, Steiners analysis, and respiratory capacity tests were performed. Most of the patients had sparse or absent hair, a short face with an unusual facial concavity, a maxillary retrusion, and a relative mandible protrusion. Depending on age and orthopedic abnormalities, patients were treated with prosthodontic and orthodontic approaches or implant treatment. Therapists should take a comprehensive and multidisciplinary approach with these patients to improve their dental, masticatory, growth, and orthognathic conditions, as well as esthetic appearance.

Evaluation of Temperature and Stress Distribution on 2 Different Post Systems Using 3-Dimensional Finite Element Analysis

Background The mouth is exposed to thermal irritation from hot and cold food and drinks. Thermal changes in the oral cavity produce expansions and contractions in tooth structures and restorative materials. The aim of this study was to investigate the effect of temperature and stress distribution on 2 different post systems using the 3-dimensional (3D) finite element method. Material/Methods The 3D finite element model shows a labio-lingual cross-sectional view of the endodontically treated upper right central incisor and supporting periodontal ligament with bone structures. Stainless steel and glass fiber post systems with different physical and thermal properties were modelled in the tooth restored with composite core and ceramic crown. We placed 100 N static vertical occlusal loading onto the center of the incisal surface of the tooth. Thermal loads of 0°C and 65°C were applied on the model for 5 s. Temperature and thermal stresses were determined on the labio-lingual section of the model at 6 different points. Results The distribution of stress, including thermal stress values, was calculated using 3D finite element analysis. The stainless steel post system produced more temperature and thermal stresses on the restorative materials, tooth structures, and posts than did the glass fiber reinforced composite posts. Conclusions Thermal changes generated stresses in the restorative materials, tooth, and supporting structures.

Alterations in maxillary sinus volume among oral and nasal breathers.

Background Oral breathing causes many changes in the facial anatomical structures in adult patients. In this study we aimed to determine the effects of long-term oral breathing (>5 years) on the maxillary sinus volumes among adult male patients. Material/Methods We accessed medical records of 586 patients who had undergone cone beam computed tomography (CBCT) for any reason between September 2013 and April 2014. Patients who had undergone cone-beam dental volumetric tomography scans for any reason and who had answered a questionnaire about breathing were screened retrospectively. Cone beam dental volumetric tomography (I-Cat, Imaging Sciences International, Hatfield, PA, USA) was used to take the images of the maxillo-facial area at a setting of 120 kVp and 3.7 mA. This study involved male patients older than 21 years of age. Results The study included a total of 239 male patients, of which 68 were oral breathers and 171 were nasal breathers. The mean age of the oral breathers was 48.4 years and that of the nasal breathers was 46.7 years and the difference was not statistically significant (p>0.05). The mean maxillary sinus volumes of the oral and nasal breathers were 9043.49±1987.90 and 10851.77±2769.37, respectively, and the difference in maxillary sinus volume between the 2 groups was statistically significant (p<0.001). Conclusions The volume of maxillary sinus in oral breathers (>5 years) was significantly lower than in nasal breathers, but it remains unclear whether this is due to malfunctioning of the nasal cavity or due to the underlying pathological condition.

Patient-specific factors in the proximity of the inferior alveolar nerve to the tooth apex.

Objectives: To evaluate whether age and gender differences are predictive factors for inferior alveolar nerve position with respect to mandibular first molar roots. Study Design: Cone-beam computed tomography scans [0.2-mm3 voxel size; n = 200 (100 males, 100 females)] of patients aged 15–65 years showing mandibular first and second molars were included in this study. Patients with pathoses that might affect inferior alveolar nerve position, including second molar and/or first premolar extraction, were excluded. Fourteen measurements (mm) were taken from the inferior alveolar nerve to the mesial and distal root apices. Subjects were grouped by age and gender. Data were analysed using two-way analyses of variance with post hoc Bonferroni corrections. Results: The distance from the inferior alveolar nerve to the root apices was smaller in females than males, regardless of age (p < 0.01). Distal roots were closer to the nerve than mesial roots in both genders (p < 0.05). Total buccolingual mandibular length (at 3-mm apical level) was shorter in females than males (p < 0.01) but mean buccolingual mandibular width at the level of the inferior alveolar canal did not differ. Nerve–root apex distances were significantly shorter in males and females aged 16–25 and 56–65 years than in other age groups (p < 0.01). Conclusions: The distance between inferior alveolar nerve and mandibular first molar roots depends upon the age and gender: it is shorter in females than in males and in subjects aged 16–25 years and >55 years than in other age groups. Key words:Age, cone-beam computed tomography, inferior alveolar nerve, root apex, gender.

Influence of fiber-reinforced composites on the resistance to fracture of vertically fractured and reattached fragments.

INTRODUCTION The aim of this in vitro study was to evaluate the fracture type and test the effects of 2 different fibers on fracture strength of roots with reattached fragments. The null hypothesis was that adding suitable fibers to the content of dual-cure adhesive resin cement increases the fracture resistance of reattached fragments under vertical forces. METHODS Root canals of 45 teeth were prepared, and the teeth were intentionally fractured into 2 separate fragments. Control groups (n = 7 each) consisted of unfractured teeth with instrumented and obturated or only instrumented root canals. The fractured teeth were divided into 3 groups (n = 15 each), and separated fragments were reattached by using (1) dual-cured resin cement (Clearfil SA), (2) dual-cured resin cement + polyethylene fiber (Construct), or (3) dual-cured resin cement + glass fiber (Stick-Net). Force was applied at a constant speed of 0.5 mm/min to the root until fracture. Mean load was recorded and analyzed statistically by using Kruskal-Wallis and Dunn tests (P = .05). Fracture types were analyzed by using χ(2) analysis with Yates correction. RESULTS Stick-Net demonstrated the lowest fracture resistance (P < .05), whereas Construct and Clearfil SA had similar fracture strengths (P > .05). The roots in the control group showed the highest fracture resistance. However, there was no statistically significant difference between the Construct, Clearfil SA, and control groups (P > .05). CONCLUSIONS Separated fragments of vertically fractured teeth can be reattached by using a dual-cured resin or by adding polyethylene fiber (Construct).

Deformation of the self-adjusting file on simulated curved root canals: a time-dependent study.

OBJECTIVE This study examined the surface changes of self-adjusting file after operating in different degrees of canal curvatures with a fixed radius of curvature in different operation intervals. STUDY DESIGN Artificial canals were manufactured in a 5-mm radius of curvature with 45° and 60° angles of curvature. Forty self-adjusting files were divided into 2 groups and submitted to functional fatigue to failure. Twenty files were tested using the 45° angle and the remaining 20 were tested using the 60° angle at 4 minutes for 7 periods in a total of 28 minutes. The average time frame for each 4-minute inspection period was considered as the moment of failure at 2, 6, 10, 14, 18, 22, and 26 minutes, respectively. Instruments were evaluated using scanning electron microscopy to characterize the material under study. RESULTS The lattice detachment began at the second period for both groups and continued to increase along with the ongoing testing time. The detachment that occurred in 60° canal curvature was higher at the third and fourth periods when compared with the 45° group (P < .05). For both groups, during the third period, detachment of the arch of the lattice was only one sided; however, this deformation was severe between the fourth and sixth periods with a 2-sided detachment, which was easier to separate. The rough surface became smooth after usage. No full separation of the file was evident for both groups. CONCLUSIONS In multirooted teeth with severely curved root canals, using more than one self-adjusting file might be recommended to prevent lattice detachment.

The effecTs of exTreMly low frequency MagneTIc fIeld and Mangan To The oral TIssues

ABSTRACT Exposure to extremely low frequency magnetic field (ELFMF) originating from daily electrical-electronic appliances and electric lines, is a common thing. Recently, the discussions focused on the topic whether ELFMF had any harmful effects over health or not. Several previous studies displayed that ELFMF significantly increased bone mineral density. The aim of the present study was to investigate the influence of ELFMF and manganese over mineral accumulation in head and jaw bones of rats. Previous studies showed that manganese plays a significant role over normal development of enamel and dentin alongside contributing to the calcium and phosphorus association. In the present study, the effects of exposure to ELFMF and manganese on mineral density and histology of teeth, were investigated. In the present study, 64 male Wistar albino rats were divided into 8 groups. Amount of mineral elevations were determined in head and jaw bones of the first 6 groups (p<.05) and histologic alterations were found in teeth of rats. The obtained results indicated that ELFMF plays an important role over mineral density and histologic structure of cranial and jaw bones in rats. In conclusion, further epidemiological and experimental laboratory studies are required for more detailed evaluation of the effects of ELFMF on cranial and jaw bones of rats.

Comparison of Apical Microleakage of Dual-Curing Resin Cements with Fluid-Filtration and Dye Extraction Techniques

Background Endodontically treated teeth with excessive loss of tooth structure are frequently restored using fiber posts. In this in vitro study, the apical leakage of self- and dual-activated curing modes for dual-curing resins cementing a translucent fiber post was evaluated using computerized fluid filtration meter and dye extraction method. Material/Methods One hundred and four extracted human maxillary incisors with single root and canal were used. Experimental samples embedded in a closed system were divided into 4 groups (n=20) according to 2 dual-curing luting systems, with 2 different curing modes (either with self- or light-activation): (1) Panavia F 2.0 with self-cure, (2) Panavia F 2.0 with light-activation, (3) Clearfill SA with self-cure, and (4) Clearfill SA with light activation. Twenty-four teeth served as negative and positive controls. Translucent fiber posts were luted in the roots except in the control groups. Results Statistical analysis indicated no significant difference in leakage among groups (p>0.05) with 4.12×10−4 (Panavia self-cure), 4.55×10−4 (Clearfill SA self-cure), 5.17×10−4 (Panavia dual-cure), and 5.59×10−4 (Clearfill SA dual-cure) in fluid-filtration method. Absorbance values for dye-extraction method were 266 nanometer (nm) (Panavia self-cure), 268 nm (Clearfill SA self-cure), 270 nm (Panavia dual-cure), and 271 nm (Clearfill SA dual-cure), in which difference among the groups were not statistically significant (p>0.05). When comparing the leakage, assessment methods results showed no statistically significant difference between the tested evaluation techniques (p>0.05). Conclusions Light- and self-activation curing modes of Panavia F 2.0 and Clearfill SA perform similar to each other in a closed system.