P. Booms

Potential lack of “standardized” processing techniques for production of allogeneic and xenogeneic bone blocks for application in humans

In the present study, the structure of two allogeneic and three xenogeneic bone blocks, which are used in dental and orthopedic surgery, were histologically analyzed. The ultimate goal was to assess whether the components postulated by the manufacturer can be identified after applying conventional histological and histochemical staining techniques. Three samples of each material, i.e. allogeneic material-1 and -2 as well as xenogeneic material-1, -2 and -3, were obtained commercially. After decalcification and standardized embedding processes, conventional histological staining was performed in order to detect inorganic matrix, cellular or organic matrix components. Allogeneic material-1 showed trabecular bone-like structures, which were free of cellular components as well as of organic matrix. The allogeneic material-2 showed trabecular bone structures, in which connective tissue and cellular remnants were embedded. Additionally, some connective tissue, which resembled fat-like tissue, was found within this material. The xenogeneic material-1 showed trabecular bone-like structures and contained organic components comparable to that demonstrated for the allogeneic material-2. The xenogeneic material-2 showed trabecular bone structures with single cells located in lacunae. The xenogeneic material-3 also showed trabecular structures. Neither cellular nor organic matrix components were found within this material. According to the data of the present study, the allogeneic material-1 and the xenogeneic material-3 were the only investigated materials for which the obtained histological data were in accordance with the manufactureŕs advertised information. The remaining three materials showed discrepancies-although the manufacturers of all five bone substitute materials stated that their blocks were free of organic/cellular remnants. These data are of great clinical and material science interest. It seems that even patented processing techniques are not always able to deliver reproducible materials. Although the manufacturers of all five bone blocks stated that their blocks were free of organic/cellular remnants, our histological analysis revealed that three out of five bone blocks did contain such remnants. Such specimens might be able to induce an immune response within the recipient.

Analysis of the in vitro degradation and the in vivo tissue response to bi-layered 3D-printed scaffolds combining PLA and biphasic PLA/bioglass components – Guidance of the inflammatory response as basis for osteochondral regeneration

The aim of the present study was the in vitro and in vivo analysis of a bi-layered 3D-printed scaffold combining a PLA layer and a biphasic PLA/bioglass G5 layer for regeneration of osteochondral defects in vivo Focus of the in vitro analysis was on the (molecular) weight loss and the morphological and mechanical variations after immersion in SBF. The in vivo study focused on analysis of the tissue reactions and differences in the implant bed vascularization using an established subcutaneous implantation model in CD-1 mice and established histological and histomorphometrical methods. Both scaffold parts kept their structural integrity, while changes in morphology were observed, especially for the PLA/G5 scaffold. Mechanical properties decreased with progressive degradation, while the PLA/G5 scaffolds presented higher compressive modulus than PLA scaffolds. The tissue reaction to PLA included low numbers of BMGCs and minimal vascularization of its implant beds, while the addition of G5 lead to higher numbers of BMGCs and a higher implant bed vascularization. Analysis revealed that the use of a bi-layered scaffold shows the ability to observe distinct in vivo response despite the physical proximity of PLA and PLA/G5 layers. Altogether, the results showed that the addition of G5 enables to reduce scaffold weight loss and to increase mechanical strength. Furthermore, the addition of G5 lead to a higher vascularization of the implant bed required as basis for bone tissue regeneration mediated by higher numbers of BMGCs, while within the PLA parts a significantly lower vascularization was found optimally for chondral regeneration. Thus, this data show that the analyzed bi-layered scaffold may serve as an ideal basis for the regeneration of osteochondral tissue defects. Additionally, the results show that it might be able to reduce the number of experimental animals required as it may be possible to analyze the tissue response to more than one implant in one experimental animal.

Monocyte preseeding leads to an increased implant bed vascularization of biphasic calcium phosphate bone substitutes via vessel maturation.

The present study analyzes the influence of the addition of monocytes to a biphasic bone substitute with two granule sizes (400-700 μm and 500-1000 μm). The majority of the added monocytes was detectable as mononuclear cells, while also low amounts of (chimeric) multinucleated giant cells (MNGCs) were found. No increase in the total number of MNGCs was established, but a significantly increased percent vascularization. Altogether, the results show that the added monocytes become involved in the tissue response to a biomaterial without marked changes in the overall reaction. Monocyte addition enables an increased implant bed vascularization especially via induction of vessel maturation and, thus intervenes positively in the healing reaction to a biomaterial.

Reduction of the relative centrifugal force influences cell number and growth factor release within injectable PRF-based matrices

Platelet rich fibrin (PRF) is a blood concentrate system obtained by centrifugation of peripheral blood. First PRF matrices exhibited solid fibrin scaffold, more recently liquid PRF-based matrix was developed by reducing the relative centrifugation force and time. The aim of this study was to systematically evaluate the influence of RCF (relative centrifugal force) on cell types and growth factor release within injectable PRF- in the range of 60–966 g using consistent centrifugation time. Numbers of cells was analyzed using automated cell counting (platelets, leukocytes, neutrophils, lymphocytes and monocytes) and histomorphometrically (CD 61, CD- 45, CD-15+, CD-68+, CD-3+ and CD-20). ELISA was utilized to quantify the concentration of growth factors and cytokines including PDGF-BB, TGF-β1, EGF, VEGF and MMP-9. Leukocytes, neutrophils, monocytes and lymphocytes had significantly higher total cell numbers using lower RCF. Whereas, platelets in the low and medium RCF ranges both demonstrated significantly higher values when compared to the high RCF group. Histomorphometrical analysis showed a significantly high number of CD61+, CD-45+ and CD-15+ cells in the low RCF group whereas CD-68+, CD-3+ and CD-20+ demonstrated no statistically significant differences between all groups. Total growth factor release of PDGF-BB, TGF-β1 and EGF had similar values using low and medium RCF, which were both significantly higher than those in the high RCF group. VEGF and MMP-9 were significantly higher in the low RCF group compared to high RCF. These findings support the LSCC (low speed centrifugation concept), which confirms that improved PRF-based matrices may be generated through RCF reduction. The enhanced regenerative potential of PRF-based matrices makes them a potential source to serve as a natural drug delivery system. However, further pre-clinical and clinical studies are required to evaluate the regeneration capacity of this system.Graphical abstract

A low-speed centrifugation concept leads to cell accumulation and vascularization of solid platelet-rich fibrin: an experimental study in vivo

Abstract Platelet-rich fibrin (PRF) is generated from the patients’ own venous blood by a single centrifugation step without the additional use of anticoagulants. Based on the previously described LSCC (low-speed centrifugation concept), our group showed that modification of the centrifugation setting, that is, reducing the relative centrifugal force (RCF) and mildly increasing the centrifugation time, resulted in modified solid and liquid PRF-matrices with increased number of platelets, leukocytes, and growth factors’ concentrations. The aim of this study was to determine whether RCF reduction might also result in different tissue reactions toward the two PRF-based matrices, especially vascularization and cell distribution in vivo. Two centrifugation protocols (PRF-high [719 g] and PRF-medium [222 g]) were compared in a subcutaneous implantation model of SCID mice at 5 and 10 days. Histological and histomorphometrical analyses were performed to quantify lymphocyte, neutrophil, human macrophage, and monocyte populations. CD31 was used to detect newly formed vessels, while all human cells were detected by using human vimentin as a pan-cellular marker. The results demonstrated that PRF-high elicited a dense and stable fibrin structure and prevented cellular penetration of the host tissue. By contrast, PRF-medium was more porous, had a significantly higher in vivo vascularization rate, and included significantly more human cells, especially at day 10, compared to PRF-high. These findings highlight the possibility of modifying the structure and composition of PRF matrices and thus selectively altering their regenerative potential in vivo. Clinical studies now must evaluate the different PRF matrices for bone and soft-tissue regeneration to validate possible benefits using personalized preparation protocols.

Influence of concentration and preparation of platelet rich fibrin on human bone marrow mononuclear cells (in vitro)

Abstract Large bone defects have always been a big challenge. The use of bone marrow mononuclear cells (BMCs) combined with an osteoconductive scaffold has been proved a good alternative for the treatment of large bone defects. Another autologous source for tissue engineering is platelet rich fibrin (PRF). PRF is a blood concentrate system obtained through a one-step centrifugation. The generated 3D matrix of the PRF clot serves as a reservoir of growth factors. Those growth factors might support the regenerative response of BMC, and therefore the effect of PRF, centrifuged with either high medium (208 g) or low (60 g) relative centrifugation force (RCF) on BMCs was evaluated in vitro in the present study. The two PRF matrices obtained were initially characterized and compared to human serum. Significantly increased concentrations of insulin-like growth factor (IGF), soluble intercellular adhesion molecule-1 (sICAM1) and transforming growth factor (TGF)-β were found in PRF compared to human serum whereas VEGF concentration was not significantly altered. A dose-response study revealed no further activation of BMC’s metabolic activity, if concentration of both PRF matrices exceeded 10% (v/v). Effect of both PRF preparations [10%] on BMC was analyzed after 2, 7, and 14 days in comparison to human serum [10%]. Metabolic activity of BMC increased significantly in all groups on day 14. Furthermore, gene expression of matrix metalloproteinases (MMP)-2, −7, and −9 was significantly stimulated in BMC cultivated with the respective PRF matrices compared to human serum. Apoptotic activity of BMC incubated with PRF was not altered compared to BMC cultivated with serum. In conclusion, PRF could be used as a growth factor delivery system of autologous or allogeneic source with the capability of stimulating cells such as BMC.