P. H. F. Yu

Novel hypoglycemic effects of Ganoderma lucidum water-extract in obese/diabetic (+db/+db) mice.

In this study, we evaluated the pharmacological effects of Ganoderma lucidum (G. lucidum) (water-extract) (0.003, 0.03 and 0.3g/kg, 4-week oral gavage) consumption using the lean (+db/+m) and the obese/diabetic (+db/+db) mice. Different physiological parameters (plasma glucose and insulin levels, lipoproteins-cholesterol levels, phosphoenolpyruvate carboxykinase (PEPCK), 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMG CoA reductase) and isolated aorta relaxation of both species were measured and compared. G. lucidum (0.03 and 0.3g/kg) lowered the serum glucose level in +db/+db mice after the first week of treatment whereas a reduction was observed in +db/+m mice only fed with 0.3g/kg of G. lucidum at the fourth week. A higher hepatic PEPCK gene expression was found in +db/+db mice. G. lucidum (0.03 and 0.3g/kg) markedly reduced the PEPCK expression in +db/+db mice whereas the expression of PEPCK was attenuated in +db/+m mice (0.3g/kg G. lucidum). HMG CoA reductase protein expression (in both hepatic and extra-hepatic organs) and the serum insulin level were not altered by G. lucidum. These data demonstrate that G. lucidum consumption can provide beneficial effects in treating type 2 diabetes mellitus (T2DM) by lowering the serum glucose levels through the suppression of the hepatic PEPCK gene expression.

Nutrient release and sediment oxygen demand in a eutrophic land-locked embayment in Hong Kong

Tolo Harbour is a large eutrophic land-locked estuarine embayment in Hong Kong. The rapid urbanization, commercio-industrial activities and lack of legislative control around the Tolo catchment produced large quantities of untreated or partially treated municipal sewage, agricultural wastes and cottage industrial effluents which were discharged into Tolo Harbour via rivers and watercourses. Control measures were implemented to reduce the external nutrient loading into the harbour since the early 1980s. Nutrient data for the period 1982 to 1997 were analyzed for temporal trends. Over the period of observation, the total inorganic nitrogen and total phosphorus both show an increasing trend, despite a decade of efforts in reducing nutrient loading. The release rates of potentially mobile nitrogen (N) and phosphorus (P) from the sediments collected from Tolo Harbour were determined by N and P release experiments under oxic conditions. The experimental results showed that the sediment released significant amount of nutrients, especially orthophosphates and ammonia nitrogen. The maximum release rates were 15.0 and 206.0 mg/m2/day, respectively. Although the external nutrient loading has been reduced, nutrients could gradually be released back into the water column from the contaminated sediments and delay improvement of the water quality.

Sub-lethal effects of heavy metals on activated sludge microorganisms.

The effects of heavy metals, at sub-lethal concentrations, on activated sludge microbial ecosystem were investigated. Adsorption capacity and rate of copper, chromium, lead and zinc on microbial flocs were much faster than that of organic matters. Metals affected not only the adsorption rate of organic matters but also the COD adsorption capacity of the activated sludge. Effects of heavy metals, on wastewater treatment performance of a sequencing batch reactor were also studied. Metal-laden wastewater at sub-lethal levels affected the performance to different extents, depending on the hydraulic retention time. Metal ions acted as a strong competitor against the organic compounds for active sites on the bioflocs instead of acting as a toxic microbial inhibitor, thus hampering organic adsorption and affecting the COD removal efficiency under shorter HRTs.

Conversion of Food Industrial Wastes into Bioplastics

The usage of plastics in packaging and disposable products, and the generation of plastic waste, have been increasing drastically. Broader usage of biodegradable plastics in packaging and disposable products as a solution to environmental problems would heavily depend on further reduction of costs and the discovery of novel biodegradable plastics with improved properties. In the authors’ laboratories, various carbohydrates in the growth media, including sucrose, lactic acid, butyric acid, valeric acid, and various combinations of butyric and valeric acids, were utilized as the carbon (c) sources for the production of bioplastics byAlcaligenes eutrophus. As the first step in pursuit of eventual usage of industrial food wastewater as nutrients for microorganisms to synthesize bioplastics, the authors investigated the usage of malt wastes from a beer brewery plant as the C sources for the production of bioplastics by microorganisms. Specific polymer production yield by A. Latus DSM 1124 increased to 70% polymer/cell (g/g) and 32g/L cell dry wt, using malt wastes as the C source. The results of these experiments indicated that, with the use of different types of food wastes as the C source, different polyhydroxyal-kanoate copolymers could be produced with distinct polymer properties.

Role of cell surface components on Cu2+ adsorption by Pseudomonas putida 5-x isolated from electroplating effluent

A gram-negative bacterium Pseudomonas putida 5-x with high Cu2+ accumulating capability was isolated from electroplating effluent in Kwun Tong, Hong Kong. The pretreated cells without superficial layer-capsule, isolated cell envelopes and the separated peptidoglycan layer materials were obtained from fresh P. putida 5-x cells, their Cu2+ adsorption capacities and properties were compared with that of the fresh cells. Pretreatment by 0.1 mol L(-1) HCl enhanced Cu2+ adsorption capacity due to the degradation of cell superficial layer-capsule of P. putida 5-x cells. Isolated cell envelopes possessed five times more Cu2+ adsorption capacity than that of fresh intact cell. The Cu2+ adsorption of separated peptidoglycan layer materials indicated that the peptidoglycan layer only played 10-15% part of the Cu2+ adsorption capacity, and implied other cell surface components such as outer membrane or inner membrane might play an important role in such high Cu2+ binding of the cell envelopes. The adsorption process of fresh cells, pretreated cells and cell envelopes of P. putida 5-x could be described with Freundlich isotherm, while the adsorption of Cu2+ by separated peptidoglycan layer materials was better described with Langmuir isotherm.

Optimal Production of Polyhydroxyalkanoates in Activated Sludge Biomass

Polyhydroxyalkanoates (PHAs) have been recognized as good candidates for biodegradable plastics, but their high price compared with conventional plastics has limited their use. In this study, actiated sludge microorgan isms from a conventional wastewater treatment process were induced, bycontrol-lingthe carbon: nitrogen (C:N) ratioin the reacorliquor, toaccumulate PHAs. In addition, an intermittent nitrogen feeding program was established to optimize the volumetric PHA productivity in a wastewater treatment process. The optimal overall polymer production yield of 0.111 g of polymer/g of carbonaceous substrate consumed was achieved under a C:N ratio of 96:1 by feeding nitrogen in the reactor liquor onceevery four cycles. At the same time, the amount of excess sludge generated from the wastewater treatment process was reduced by22.9%.

Synthesis of Polyhydroxyalkanoate (PHA) from Excess Activated Sludge Under Various Oxidation-Reduction Potentials (ORP) by Using Acetate and Propionate as Carbon Sources

Accumulation of poly hydroxyalkanoate (PHA) from excess activated sludge (EAS) was monitored and controlled via the oxidation-reduction potential (ORP) adjusting process. The ORP was adjusted and controlled by only regulating the gas-flow rate pumped into the cultural broth in which sodium acetate (C2) and propionate (C3) were used as carbon sources. Productivity of PHA and the PHA compositions at various C2 to C3 ratios were also investigated. When ORP was maintained at +30 mV, 35% (w/w) of PHA of cell dry weight obtained when C2 was used as sole carbon source. The PHA copolymer, poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), accumulated by EAS with different 3-hydroxyvalarate (3HV) molar fractions ranged from 8% to 78.0% when C2 and C3 was used as sole carbon source, By using ORP to monitor and control the fermentation process instead DO meter, the ORP system provided more precise control to the PHA accumulation process from EAS under low dissolved oxygen (DO) concentrations. Adjusting the C2 to C3 ratios in the media could control the composition such as the 3HV/3HB ratios of the PHBV. Furthermore, it might be an effective way to adjust the 3HV molar fractions in PHBV by controlling the DO concentration via the ORP monitoring system. The 3HV molar fractions in the PHBV declined with increasing ORP from -30 mV to +100 mV by adjusting the gas-flow rate (i.e. the DO concentration). It is concluded that the DO plays a very important role in the synthesis of 3HV subunits in PHBV co-polymer from the EAS. Therefore, a hypothetic metabolic model for PHA synthesis from EAS was proposed to try to explain the results in this study.

Effects of Trace Levels of Copper, Chromium, and Zinc Ions on the Performance of Activated Sludge

The effects of copper, chromium, and zinc ions, at trace levels, on the performance of a simulated activated sludge process were investigated. The results of batch adsorption experiments showed that the adsorption of copper, chromium, and zinc ions followed both the Langmuir and Freundlich isotherms. The presence of trace levels of these three metals not only reduced the adsorption rate of organic matters but also the chemical oxygen demand adsorption capacity (CAC) of the activated sludge. Metal ions competed with the organic substrate for adsorption binding sites on the surfaces of activated sludge bioflocs and reduced the CAC. Studies performed in a sequential batch reactor (SBR) showed that the presence of trace levels of heavy metal ions in wastewater affected the SBR performance to different extents depending on the hydraulic retention time (HRT). When the reactors were operated at short HRTs of 2.5 d or less, the presence of trace levels of heavy metal ions reduced substantially the CAC of activated sludge, which, in turn, affected significantly the performance of the SBR. However, under longer HRTs (e.g., 5 d), the heavy metal ions in the wastewater reduced the CAC but had no significant effect on the chemical oxygen demand removal efficiency.

Ni2+ Removal and Recovery from Electroplating Effluent by Pseudomonas putida 5-x Cell Biomass

Abstract Ni2+ and Cu2+ are the major heavy metal ions in electroplating wastewater of Hong Kong. In the present study, Pseudomonas putida 5-x cell biomass was used to remove Ni2+ from electroplating effluent. Ni2+ adsorption capacity of P. putida 5-x cell biomass cultured in sulphate-limiting medium was found to be minimum in early logarithmic growth phase, and maximum of 28.1 mg g−1 in late stationary growth phase. Pretreated cells by 0.1 mol L−1 HCl could greatly enhance the Ni2+ adsorption capacity of cell biomass from 28.1 to 36.7 mg g−1 and had no significant effect on biomass loss. The adsorption process of P. putida 5-x fresh cells and pretreated cell all could be expressed with Freundlich isotherm. TEM analyses indicated that acidic pretreatment degraded the superficial layer-capsule outside of the fresh cell to improve the adsorption capacity of cell to Ni2+. The Ni2+ bound by P. putida 5-x cell biomass could be efficiently recovered using 0.1 mol L−1 HCl, and the cell biomass could be reused at least five cycles for Ni2+ removal and recovery with 93% above removal efficiency and 98% above recovery rate. Owing to the Cu2+ presented in electroplating wastewater inhibiting Ni2+ adsorption process by P. putida 5-x cell biomass, two-stage biosorption processes should be designed to remove and recover Cu2+ and Ni2+ sequentially from electroplating effluent.

Accumulation of Biodegradable Copolyesters of 3-Hydroxy-Butyrate and 3-Hydroxyvalerate in Alcaligenes eutrophus

Biodegradable copolyesters of 3-hydroxybutyrate-co-3-hydroxyvalerate (3HB-3HV) were produced by Alcaligenes eutrophus in a two-staged process, namely growth stage and nitrogen-deficient polyester-accumulation stage. When C5 was used as the sole carbon source, the copolyester contained 43 mol % of 3HV. A range of copolyesters with 0-43 mol % of 3HV could be produced by using a medium containing different concentration ratios of butyric acid C4 and C5. Tm of PHB homopolymer was 177.6 degrees C and that of copolyester with highest 3HV mol fraction of 43% was 99.0 degrees C. C5 concentration in the medium could be an effective means to control the polymeric composition and mechanical properties of the copolyesters accumulated in A. eutrophus.